,ll iii1,,,,__ _ ...........
SERVICE AN ADJUSTMENTS
..................,,, | i | i | iii, | i |
TO ADJUST STEERING WHEEL ALIGNMENT
If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer-
ing wheel and reassemble per instructions in the Assembly section of this manual
WASHERS
RETAINING
FRONT WHEEL TOE-INICAMBER
The front wheel
TO REMOVE WHEEL FOR REPAIRS (See Fig. 28)
•Block up axle securely
oRemove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not !ose),
o Repair tire and reassemble,
,On rear wheels only: align grooves in rear wheel hub and axle Insert square key.
Replace washers and snap retaining ring securely in axle groove.
oReplace axle cover
NOTE: To seat tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local
parts dealer° Tire sealant also prevents tire dry rot and corrosion,,
AXLE COVER
f
_SQUARE KEY (REAR
WHEEL ONLY)
FIG. 28
25