Craftsman 917.27066 Towing Carts and Other Attachments, To Operate Mower, To Operate on Hills

Page 14

ing hot months. For healthier and better

looking lawns, mow often and after

moderate growth.

For best cutting performance, grass

over 6 inches in height should be mowed twice. Make the first cut rela-

tively high; the second to desired

height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disen-

A_lLgage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the discharge guard in place.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual•

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to

brake position and engage parking brake.

Move motion control lever to neutral (N)

position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is de-

pressed.

 

 

 

Attachment Clutch

 

Attachment Lift

Lever "Engaged_--_

 

Lever High Position

Position

__.

 

 

 

 

+':_'+

*'Dlsengaged-_--_,v//'=,]l

} ._,::"L"Low Position

Position

t. __

.._:-'_

 

 

 

,_"

DiS3hdrge

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by

placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

Raise attachment lift to highest position with attachment lift control.

Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord,

etc.).

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing.

Too heavy of a load, while on a slope, is dangerous. _res can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw

cap tight, wait for a few seconds, remove and read oil level. If necessary,

add oil until "FULL" mark on dipstick is reached. Do not overfill.

14

Image 14
Contents Craftsman Sears Craftsman Help Line 5 am 5 pro, Mon- SatRrnnvA kmw hAfnr limnltnfinn Limited TWO Year Warranty on Craftsman Riding EquipmentGeneral Operation Slope Operation ServiceSerious injury Do notPeople before mowing. Stop machine if anyone enters the area Customer Responsibiuties Product SpecificationsMntenanceagreement Parts BAG Contents Shown Full Size Wheel Separately in cartonSteering Steering MulcherTo Remove Tractor from Carton Before Rolung Tractor OFF Skid Attach Steering WheelCheck Tire Pressure Install SeatTo Drive Tractor OFF Skid Check Deck LevelnessTo Convert to Bagging or ChecklistInstall Mulcher Plate DischargingH L Know Your Tractor To SET Parking Brake HOW to USE Your TractorStopping Mower BladesTo Operate on Hills Towing Carts and Other AttachmentsTo Operate Mower To TransportAutomatic Transmission Warm UP ADD GasouneTo Start Engine Purge Transmission Mowing TipsMulching Mowing Tips Important For best performance, keepBefore Each USE General Recommendations Lubrication ChartCustomer Operator Presence System Brake OperationTires Blade CareEngine Spark Plugs Clean AIR ScreenMuffler IN-UNE Fuel FilterTo Remove Mower CleaningTo Install Mower Suspension Arms Rod Retainer Spring Anti-SwaybarFront Links Raise mower to its highest positionNut F To Replace Mower Blade Drive BeltCenter/department To Adjust BrakePulley NutTo Start Engine That has a Weak Battery Transaxle Motion Control LE- VER AdjustmentTo Adjust Steering Wheel ALIGN- Ment Transmission REMOVAL/REPLACE- MentInterlocks and Relays Replacing BatteryTo Replace Headlight Bulb To Replace FuseEngine To Adjust THROI-rLE Control CableTo Adjust Carburetor GovernorIdle Speed Acceleration TestThrottle Fuel System BatteryTo Clean Batteryand Termi Engine OILCause Troubleshooting HartProblem Correction Troubleshooting ChartProblem Troubleshooting Chart Schematic Tractor Model NumberElectrical Tractor - Model NumberNO. NO.DESCRIPTION Tractor - Model NumberElectrical Tractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number Steering Assembly Screw KEY Part NO. no66 1544O4 Washer 13/32 x 1-1/4 x 12 Ga Bolt Hex Nylon 3/8-16 x 3/4Tractor - Model Number Engine OPTIONALSpark ArresterEQUIPMENT165291 16215717720410 KEY Part Tractor --MODEL Number Seat AssemblyKEY 155925 Pan Pnt Seat blk 127018 BoltShoulder5/16-18X 166369133644 166887 163204 Wheels & Tires156811 167179 1632oo Tractor - Model Number Lift Assembly 73540600 127218163552 14,18 Mower DeckLo3- \/i RetainerSpdng 164961 MowerHousing STD533107 Bolt 138017Front 138440 Washer, HardenedTractor - Model Number Hydro Transaxle - Model Number 135 144608 Pin, Cotter 142951 Oil Filter Element 139 150775 16 x 7/8 xX 1.5 x 1026 230614 127 138 106 987 95 117 634 634A Gasket SET Carburetor Gasket SET474 201544 783 728494385 356 497708 Wire Assembly Haust 358 495993 Gasket Set 872 Counterweight AssemblyPin, Counterweight Cover,Air CleanerPage Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across HillHome CentralsM

917.27066 specifications

The Craftsman 917.27066 is a powerful and reliable riding lawn mower designed to make lawn maintenance a hassle-free task. This model combines a strong build quality with modern technology, catering to homeowners who value efficiency and performance in yard care.

One of the standout features of the Craftsman 917.27066 is its robust engine. Equipped with a 19 horsepower Briggs & Stratton engine, it delivers ample power that allows it to tackle various terrains with ease. This engine is designed for durability and efficiency, ensuring that users can cover more ground without frequent refueling.

The mower includes a 42-inch cutting deck, which provides a well-balanced cutting width perfect for medium-sized lawns. The size of the deck facilitates a clean and precise cut, ensuring that users can achieve a professional-looking finish in minimal time. The adjustable cutting height feature, with multiple settings, allows users to customize the grass length to meet their specific lawn care needs.

In terms of technology, the Craftsman 917.27066 features an electric start for convenient operation. This means no more pulling on a starter cord repeatedly; simply turn the key, and you're ready to mow. The adjustable seat adds to the comfort, making it suitable for extended use during those long mowing sessions.

The ergonomically designed steering wheel and intuitive control layout enhance the user experience by making the mower easy to maneuver. The tight turning radius enables users to navigate around flowerbeds, trees, and other obstacles, ensuring a thorough cut without leaving unkempt patches.

Another notable characteristic is the transmission system. The Craftsman 917.27066 features a hydrostatic drive system, which provides seamless speed adjustments and enhances overall ease of use. This is particularly beneficial for beginners who may find traditional gear transmissions challenging.

Moreover, the mower is designed with durability in mind. Its reinforced frame and heavy-duty materials ensure it can withstand the wear and tear of regular use. The incorporation of safety features, such as a safety switch that stops the engine when the operator leaves the seat, adds an extra layer of protection for users.

Overall, the Craftsman 917.27066 is a versatile and powerful riding lawn mower that combines ease of use, comfort, and efficiency, making it an excellent choice for homeowners who want to maintain their lawns effortlessly. Whether tackling flat surfaces or uneven terrain, this mower provides a dependable solution for all your lawn care needs.