Craftsman 917.27066 To Clean Batteryand Termi, Fuel System, Engine OIL, Cylinders, Other

Page 29

Immediatelyprepareyour tractor for stor-

age at the end of the season or if the trac- tor will not be used for 30 days or more.

_CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. This will allow you to clean it thor- oughly. Remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See "CLEANING" in the Maintenance section of this manual).

•Inspect and replace belts, if necessary

(See belt replacement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint

surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected

and battery cleaned thoroughly (see

"TO CLEAN BATTERYAND TERMI-

NALS" in the Maintenance section of this manual).

•After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery ter- minals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel

filter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to.separation and formation o acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable al- ternative in minimizing the formation of fuel gum deposits during storage. Add sta- bilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carbure

tor. Do not drain the gas tank and carbure-

tor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to "START" position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if it starts to rust. Rust and/or dirt in your gasoline wil cause problems.

•If possible, store your tractor indoors

and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protec tive cover that does not retain moisture.

Do not use plastic. Plastic cannot breathe, which allows condensation to

form and cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Sears Craftsman Help Line 5 am 5 pro, Mon- Sat CraftsmanRrnnvA kmw hAfnr limnltnfinn Limited TWO Year Warranty on Craftsman Riding EquipmentGeneral Operation Serious injury ServiceSlope Operation Do notPeople before mowing. Stop machine if anyone enters the area Customer Responsibiuties Product SpecificationsMntenanceagreement Parts BAG Contents Shown Full Size Steering Separately in cartonWheel Steering MulcherBefore Rolung Tractor OFF Skid Attach Steering Wheel To Remove Tractor from CartonTo Drive Tractor OFF Skid Install SeatCheck Tire Pressure Check Deck LevelnessInstall Mulcher Plate ChecklistTo Convert to Bagging or DischargingH L Know Your Tractor Stopping HOW to USE Your TractorTo SET Parking Brake Mower BladesTo Operate Mower Towing Carts and Other AttachmentsTo Operate on Hills To TransportAutomatic Transmission Warm UP ADD GasouneTo Start Engine Mowing Tips Purge TransmissionImportant For best performance, keep Mulching Mowing TipsBefore Each USE General Recommendations Lubrication ChartCustomer Tires Brake OperationOperator Presence System Blade CareEngine Muffler Clean AIR ScreenSpark Plugs IN-UNE Fuel FilterTo Install Mower CleaningTo Remove Mower Suspension Arms Rod Retainer Spring Anti-SwaybarNut F Raise mower to its highest positionFront Links To Replace Mower Blade Drive BeltPulley To Adjust BrakeCenter/department NutTo Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control LE- VER AdjustmentTo Start Engine That has a Weak Battery Transmission REMOVAL/REPLACE- MentTo Replace Headlight Bulb Replacing BatteryInterlocks and Relays To Replace FuseTo Adjust Carburetor To Adjust THROI-rLE Control CableEngine GovernorIdle Speed Acceleration TestThrottle To Clean Batteryand Termi BatteryFuel System Engine OILCause Troubleshooting HartProblem Correction Troubleshooting ChartProblem Troubleshooting Chart Tractor Model Number SchematicTractor - Model Number ElectricalNO. NO.DESCRIPTION Tractor - Model NumberElectrical Tractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number Steering Assembly 66 1544O4 KEY Part NO. noScrew Washer 13/32 x 1-1/4 x 12 Ga Bolt Hex Nylon 3/8-16 x 3/4OPTIONALSpark ArresterEQUIPMENT Tractor - Model Number Engine165291 16215717720410 KEY Tractor --MODEL Number Seat AssemblyKEY Part 155925 Pan Pnt Seat blk 127018 BoltShoulder5/16-18X 166369133644 166887 163204 Wheels & Tires156811 167179 1632oo Tractor - Model Number Lift Assembly 73540600 127218163552 14,18 Mower DeckLo3- \/i Front 138440 164961 MowerHousing STD533107 Bolt 138017RetainerSpdng Washer, HardenedTractor - Model Number Hydro Transaxle - Model Number 135 144608 Pin, Cotter 142951 Oil Filter Element 139 150775 16 x 7/8 xX 1.5 x 1026 230614 127 138 106 987 95 117 634 634A Carburetor Gasket SET Gasket SET544 201474 783 728494385 Pin, Counterweight Counterweight Assembly356 497708 Wire Assembly Haust 358 495993 Gasket Set 872 Cover,Air CleanerPage Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationHome CentralsM

917.27066 specifications

The Craftsman 917.27066 is a powerful and reliable riding lawn mower designed to make lawn maintenance a hassle-free task. This model combines a strong build quality with modern technology, catering to homeowners who value efficiency and performance in yard care.

One of the standout features of the Craftsman 917.27066 is its robust engine. Equipped with a 19 horsepower Briggs & Stratton engine, it delivers ample power that allows it to tackle various terrains with ease. This engine is designed for durability and efficiency, ensuring that users can cover more ground without frequent refueling.

The mower includes a 42-inch cutting deck, which provides a well-balanced cutting width perfect for medium-sized lawns. The size of the deck facilitates a clean and precise cut, ensuring that users can achieve a professional-looking finish in minimal time. The adjustable cutting height feature, with multiple settings, allows users to customize the grass length to meet their specific lawn care needs.

In terms of technology, the Craftsman 917.27066 features an electric start for convenient operation. This means no more pulling on a starter cord repeatedly; simply turn the key, and you're ready to mow. The adjustable seat adds to the comfort, making it suitable for extended use during those long mowing sessions.

The ergonomically designed steering wheel and intuitive control layout enhance the user experience by making the mower easy to maneuver. The tight turning radius enables users to navigate around flowerbeds, trees, and other obstacles, ensuring a thorough cut without leaving unkempt patches.

Another notable characteristic is the transmission system. The Craftsman 917.27066 features a hydrostatic drive system, which provides seamless speed adjustments and enhances overall ease of use. This is particularly beneficial for beginners who may find traditional gear transmissions challenging.

Moreover, the mower is designed with durability in mind. Its reinforced frame and heavy-duty materials ensure it can withstand the wear and tear of regular use. The incorporation of safety features, such as a safety switch that stops the engine when the operator leaves the seat, adds an extra layer of protection for users.

Overall, the Craftsman 917.27066 is a versatile and powerful riding lawn mower that combines ease of use, comfort, and efficiency, making it an excellent choice for homeowners who want to maintain their lawns effortlessly. Whether tackling flat surfaces or uneven terrain, this mower provides a dependable solution for all your lawn care needs.
Top Page Image Contents