Craftsman 917.27066 owner manual To Drive Tractor OFF Skid, Install Seat, Check Tire Pressure

Page 9

HOW TO SET UPYOUR TRACTOR CHECK BAI-rERY

Lift seat pan to raised postion and open battery box door.

If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour

at 6-10 amps. (See "BAI-I-ERY" in

MAINTENANCE section of this manual for charging structions.)

Label

Door

Terminal

INSTALL SEAT

Adjust seat before tightening adjustment knob.

Remove cardboard packing on seat pan.

Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

Assemble adjustment knob and flat washer loosely. Do not tighten.

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment knob

securely.Seat

Seat Pan

Shoulder

Bolt

AdjFlat

KnobWasher

TO ROLL TRACTOR OFF SKID (See

Operation section for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position,

Release parking brake by depressing clutch/brake pedal.

Place freewheel control in freewheelin_ position to disengage transmission (See "TO TRANSPORT" in the Opera- tion section of this manual).

Roll tractor forwardoff skid.

Remove banding holding discharge guard up against tractor.

TO DRIVE TRACTOR OFF SKID

A WARNING: Before starting read, understand and follow all instruct ons n

the Operation section of this manual. Be sure tractor is in a well-ventilated area. B_

sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been completed.

Check engine oil level and fill fuel tank with gasoline.

Place freewheel control in 'transmissiot engaged" position.

Sit on seat in operating position, depress clutch/brake pedal and set the parking brake,

Place motion control lever in neutral (N position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine. After engine has started, move throttle control to idle position.

Release parking brake.

Slowly move the motion control lever forward and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

Turn ignition key to "OFF" position. Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflate¢ at the factory for shipping purposes.

Correct tire pressure is important for best cutting performance.

Reduce tire pressure to PSI shown in

"PRODUCT SPECIFICATIONS" sectior of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See 'TO LEVEL MOWER HOUSING" in the Servic

and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments sectoin of this manual. Verify that the belt_

9 are routed correctly.

Image 9
Contents Sears Craftsman Help Line 5 am 5 pro, Mon- Sat CraftsmanLimited TWO Year Warranty on Craftsman Riding Equipment General OperationRrnnvA kmw hAfnr limnltnfinn Serious injury ServiceSlope Operation Do notPeople before mowing. Stop machine if anyone enters the area Product Specifications MntenanceagreementCustomer Responsibiuties Parts BAG Contents Shown Full Size Steering Separately in cartonWheel Steering MulcherBefore Rolung Tractor OFF Skid Attach Steering Wheel To Remove Tractor from CartonTo Drive Tractor OFF Skid Install SeatCheck Tire Pressure Check Deck LevelnessInstall Mulcher Plate ChecklistTo Convert to Bagging or DischargingH L Know Your Tractor Stopping HOW to USE Your TractorTo SET Parking Brake Mower BladesTo Operate Mower Towing Carts and Other AttachmentsTo Operate on Hills To TransportADD Gasoune To Start EngineAutomatic Transmission Warm UP Mowing Tips Purge TransmissionImportant For best performance, keep Mulching Mowing TipsGeneral Recommendations Lubrication Chart CustomerBefore Each USE Tires Brake OperationOperator Presence System Blade CareEngine Muffler Clean AIR ScreenSpark Plugs IN-UNE Fuel FilterTo Install Mower CleaningTo Remove Mower Suspension Arms Rod Retainer Spring Anti-SwaybarNut F Raise mower to its highest positionFront Links To Replace Mower Blade Drive BeltPulley To Adjust BrakeCenter/department NutTo Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control LE- VER AdjustmentTo Start Engine That has a Weak Battery Transmission REMOVAL/REPLACE- MentTo Replace Headlight Bulb Replacing BatteryInterlocks and Relays To Replace FuseTo Adjust Carburetor To Adjust THROI-rLE Control CableEngine GovernorAcceleration Test ThrottleIdle Speed To Clean Batteryand Termi BatteryFuel System Engine OILTroubleshooting Hart ProblemCause Troubleshooting Chart ProblemCorrection Troubleshooting Chart Tractor Model Number SchematicTractor - Model Number ElectricalTractor - Model Number ElectricalNO. NO.DESCRIPTION Tractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Ground Drive KEY Part Description Tractor - Model Number Steering Assembly 66 1544O4 KEY Part NO. noScrew Washer 13/32 x 1-1/4 x 12 Ga Bolt Hex Nylon 3/8-16 x 3/4OPTIONALSpark ArresterEQUIPMENT Tractor - Model Number Engine162157 17720410165291 KEY Tractor --MODEL Number Seat AssemblyKEY Part 155925 Pan Pnt Seat blk 127018 BoltShoulder5/16-18X 166369Wheels & Tires 156811 167179 1632oo133644 166887 163204 Tractor - Model Number Lift Assembly 127218 16355273540600 Mower Deck Lo3- \/i14,18 Front 138440 164961 MowerHousing STD533107 Bolt 138017RetainerSpdng Washer, HardenedTractor - Model Number Hydro Transaxle - Model Number 16 x 7/8 x X 1.5 x135 144608 Pin, Cotter 142951 Oil Filter Element 139 150775 230 6141026 127 138 106 987 95 117 634 634A Carburetor Gasket SET Gasket SET544 201474 783 728494385 Pin, Counterweight Counterweight Assembly356 497708 Wire Assembly Haust 358 495993 Gasket Set 872 Cover,Air CleanerPage Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationHome CentralsM

917.27066 specifications

The Craftsman 917.27066 is a powerful and reliable riding lawn mower designed to make lawn maintenance a hassle-free task. This model combines a strong build quality with modern technology, catering to homeowners who value efficiency and performance in yard care.

One of the standout features of the Craftsman 917.27066 is its robust engine. Equipped with a 19 horsepower Briggs & Stratton engine, it delivers ample power that allows it to tackle various terrains with ease. This engine is designed for durability and efficiency, ensuring that users can cover more ground without frequent refueling.

The mower includes a 42-inch cutting deck, which provides a well-balanced cutting width perfect for medium-sized lawns. The size of the deck facilitates a clean and precise cut, ensuring that users can achieve a professional-looking finish in minimal time. The adjustable cutting height feature, with multiple settings, allows users to customize the grass length to meet their specific lawn care needs.

In terms of technology, the Craftsman 917.27066 features an electric start for convenient operation. This means no more pulling on a starter cord repeatedly; simply turn the key, and you're ready to mow. The adjustable seat adds to the comfort, making it suitable for extended use during those long mowing sessions.

The ergonomically designed steering wheel and intuitive control layout enhance the user experience by making the mower easy to maneuver. The tight turning radius enables users to navigate around flowerbeds, trees, and other obstacles, ensuring a thorough cut without leaving unkempt patches.

Another notable characteristic is the transmission system. The Craftsman 917.27066 features a hydrostatic drive system, which provides seamless speed adjustments and enhances overall ease of use. This is particularly beneficial for beginners who may find traditional gear transmissions challenging.

Moreover, the mower is designed with durability in mind. Its reinforced frame and heavy-duty materials ensure it can withstand the wear and tear of regular use. The incorporation of safety features, such as a safety switch that stops the engine when the operator leaves the seat, adds an extra layer of protection for users.

Overall, the Craftsman 917.27066 is a versatile and powerful riding lawn mower that combines ease of use, comfort, and efficiency, making it an excellent choice for homeowners who want to maintain their lawns effortlessly. Whether tackling flat surfaces or uneven terrain, this mower provides a dependable solution for all your lawn care needs.