Craftsman 917.27268 manual Mowing Tips, Purge Transmission

Page 16

PURGE TRANSMISSION

_i, CAUTION: Never engage or disengage freewheel lever while the engine is run- ning.

To ensure proper operation and per- formance, it is recommended that the transmission be purged before operating

tractor for the first time. This procedure will remove any trapped air inside the trans- mission which may have developed during

shipping of your tractor.

IMPORTANT: Should your transmission require removal for service or replace- ment, it should be purged after reinstall- ation before operating the tractor.

1.Place tractor safely on level surface with engine off and parking brake set.

2.Disengage transmission by placing freewheel control in "transmission dis-

engaged" position (See "TO TRANS- PORT" in this section of manual).

3.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

4.Move motion control lever to full

forward position and hold for five (5) seconds. Move lever to full reverse

position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this step there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

5.Move motion control lever to neutral

(N)position. Shutoff engine and set parking brake.

6.Engage transmission by placing freewheel control in "transmission

engaged" position (See "TO TRANS- PORT" in this section of manual).

7.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed.

With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

8.Slowly move motion control lever for- ward, after the tractor moves approxi- mately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five

(5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

Your transmission is now purged and ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has already been

cut. Have the cut area to the right of the tractor. This will result in a more

even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds,

mow in the opposite direction making left hand turns until finished.

•If grass is extremely tall, it should be mowed twice to reduce load and pos- sible fire hazard from dried clippings.

Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mow- ing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain

and give best performance of the at- tachment being used.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents IC..FTSMeWl Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationDo not IV. ServiceIII. Children Across Customer Responsibilities Sears Installation ServiceAgreements Steering Howto SET UP Your Tractor Tools Required for AssemblyInstall Seat To Remove Tractor fromCheck Battery Install Mulcher Plate Check Deck LevelnessDischarging Check for Proper Position of ALL BeltsH L I.,I Light Switch Know Your TractorHowto USE Your Tractor Before Starting the Engine To Operate on HillsTo Transport Towing Carts and Other ATTACH- MentsTo Start Engine Automatic Transmission Warm UPMowing Tips Purge TransmissionMulching Mowing Tips General Recommendations Before Each USEBattery Operator Presence SystemBlade Care To Sharpen BladeTransaxle Pump Fluid EngineLubrication Clean AIR Screen AIR FilterEngine Cooling Fins MufflerCleaning To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentTo Adjust Brake To Check and Adjust BrakeBelt Installation Belt RemovalTransmission Removal Replacement AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Remove Hood and Grill Assembly To Attach Jumper CablesInterlocks and Relays To Replace FusePreliminary Setting To Adjust Throttle Control CableTo Adjust Carburetor Acceleration Test Battery TractorFuel System Engine OILProblem Troubleshooting ChartCause Clean Cause CorrectionProblem Cause Correction Trash underTractor - Model Number Schematic OEo ÷IIIG OLAoKTractor - Model Number Electrical KEY Part Description Tractor - Model Number Chassis and Enclosures Tractor - Model Number Chassis and Enclosures Tractor - Model Number Ground Drive 200 Tractor - Model Number 917.272680 Steering Assembly Tractor - Model Number 917.272680 Steering Assembly Tractor - Model Engine Tractor - Model Number Engine Tractor - Model Number 917.272680 Seat Assembly KEY Part DescriptionX20 Tractor - Model Number DecalsTractor - Model Number Lift Assembly Tractor - Model Number Lift Assembly Tractor - Model Number Mower Deck 136420 =o= 032 434 O511 7o9 947 513 544Ao3,, 3,oi 106 690577 Seat-Inlet Wrench-Spark Plug Page Suggested Guide for Sighting Slopes for Safe Operation SE/AR

917.27268 specifications

The Craftsman 917.27268 is a standout model in the realm of riding mowers, designed to offer powerful performance combined with ease of use for both residential and commercial lawn care. This versatile riding mower is equipped with a host of features that make it a valuable asset for maintaining lush and healthy lawns.

One of the most notable aspects of the Craftsman 917.27268 is its robust engine. Powered by a reliable 19 horsepower Briggs & Stratton engine, this mower provides ample power to tackle tough terrains and thick grass. The engine is paired with an automatic transmission that allows for smooth and effortless speed adjustments, ensuring that operators can easily navigate through their lawns without any hassle.

The mower's cutting deck is another standout feature. With a 42-inch cutting width, it allows for efficient mowing, reducing the number of passes needed to cover large areas. The deck also has a three-blade system, which ensures a clean and even cut every time. Additionally, the cutting height can be easily adjusted to meet the specific needs of your lawn, offering six different height settings for an optimal finish.

Ergonomic design is a key characteristic of the Craftsman 917.27268. It features a comfortable seat with a high backrest that provides ample support during extended mowing sessions. The steering wheel is positioned for enhanced control, allowing users to maneuver the mower with confidence. The mower also includes a foot-operated deck lift for straightforward height adjustments, making it user-friendly for individuals of all skill levels.

When it comes to technology, the Craftsman 917.27268 incorporates various features designed to enhance functionality. For instance, it boasts an integrated mulching capability, allowing clippings to be finely chopped and returned to the lawn as natural fertilizer. This not only saves time but also promotes healthier grass growth. Additionally, the mower is equipped with a sturdy frame and durable wheels that ensure stability and longevity, reinforcing its position as a reliable choice for lawn maintenance.

In conclusion, the Craftsman 917.27268 delivers power, versatility, and user-friendly features, making it an ideal choice for anyone looking to maintain their lawn effectively. Its combination of a capable engine, efficient cutting system, ergonomic design, and thoughtful technologies creates an appealing package for homeowners and lawn care enthusiasts alike.
Top Page Image Contents