Craftsman 917.28990 manual Using the Reverse Operation System, To Operate on Hills, To Transport

Page 16

TOSTOPMOWERBLADES- disengageattachmentclutchcontrol.

CAUTION:Donotoperatethemower

withouteithertheentiregrasscatcher,

onmowerssoequipped,orthedeflector

shield(S)inplace.

REVERSEOPERATIONSYSTEM(ROS) YourtractorisequippedwithaReverse OperationSystem(ROS)Anyattemptby. theoperatortravelinthereversedirec- tionwiththeattachmentclutchengaged wiltshutofftheengineunlessignitionkey isplacedintheROS"ON"position.

_I_,WARNING: Backing up with the at- tachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should onty be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION

SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

1.Depress brake pedal all the way down.

2.With engine running, turn ignition key counterclockwise to ROS "ON" position.

3.Look down and behind before and while backing.

TO OPERATE ON HILLS

_WARNING:

Do not drive up or down

hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual.

*Choose the slowest speed before start- ing up or down hills.

Avoid stopping or changing speed on hills. If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

To restart movement, slowly release parking brake and brake pedal.

Slowly depress appropriate drive pedal to slowest setting.

Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear

drawbar of tractor.

1.Raise attachment lift lever to its highest position.

2.Pull freewheel control out and into

the slot and release so it is held in the

disengaged position.

*Do not push or tow tractor at more than two (2) MPH.

*To re-engage transmission, reverse

above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured

to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

Transmission Engaged

4.Slowly depress reverse drive pedal to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position Engine "ON" Position (Normal Operating)

Transmission Disengaged

TOWING CARTS AND OTHER

ATTACHMENTS

Tow onty the attachments that are recom- mended by and comply with specifications of the manufacturer of your tractor. Use

common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Craftsman Days on Battery Craftsman Limited Warranty TWO Years on TractorSears, Roebuck and Co,, Noffman Estates, IL General Operation Service Safe Handling of Gasoline IV. TowingGeneralservice Sears Installation Service PRODUCTSPECIFiCATiONSFor prices and additional information call Mower KeysTools Required for Assembly Check BatteryAdjust Seat To Remove Tractor from Carton Unpack CartonFirst Install ANTI-SWAY BAR S Attach Mower Side Suspen10Turnsteeringwheeltopositionwheels Straightforward Checklist Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL Belts@@@@@ CruisecontrolAttachment Clutch Switch Service Reminder / Hour ME=Know Your Tractor TractorStopping To SET Parking BrakeTo USE Throttle Control D System Characteristics To Adjust Mower Cutting HeightTo Adjust Gauge Wheels To USE Cruise ControlUsing the Reverse Operation System To Operate on HillsTo Transport Towing Carts and Other AttachmentsBefore Starting the Engine To Start EngineADD Gasoline Purge TRANSMiSSiON Mowing TiPSMaintenance Schedule ChartGeneral Recommendations Before Each USETires Operator Presence SystemTo Service Cartridge Transaxle Pump FluidBelts To Change Engine OILMuffler Clean AIR ScreenIN=LINE Fuel Filter Deck Washout Port To Remove Mower To Install Mower Visual SIDE-TO-SIDE AdjustmentPrecision SIDE-TO-SIDE Adjustment To Level MowerMower Drive Belt Installation Belt InstallationTo Replace Mower Drive Belt Mower Drive Belt Removal To Replace Motion Drive BeltTo Check Brake To Remove Wheel for RepairsTo Start Engine with a Weak BAT Tery To Attach Jumper CablesReplacing Battery SemblyFuel System Engine OiLCylinders OtherProblem Cause CorrectionStart Hard toLoss of power When OperatorWill ExcessivePoor cut uneven CuttingMower blades will DischargeOFF ROSSuggested Guide for Sighting Slopes for Safe Operation DOS Anos Para Tractores Funcionamiento PendientesServioio MANIPULACI6N Segura DE LA Gasoljna IV. RemolqueOperacjones DE Servicjo Generales @@@@@ Especircaciones DEL Producto Responsabimdades DEL CmenteDvertencia Acuerdos DE PROTECCI!N ParaLlaves La segadoraDad y la funci6n de los controles Para Hacer Rodar EL TractorMonte Rueda Delatentera DE LA Jnstale LA Segadora Y LA Correa DE TransmisjonMontaje DE LA SE,GADORA Y DE LA COR- REA DE Transmision Fije LOS Brazos DE Suspension LATRealiceelmismoprocedimientoelotro ladodeltractor REVISI6N DE LA Presion DE LAS Llantas Revision DE LA Nivelacion DEL ConjuntoRevision DE LA Posicion ADECUA= DA DE Todas LAS CorreasESTRANGU- R/PIDO Lento LacionAtras Hacia Adelante Crucero DE Embrague Accesorio DEL FuegoPage Parada Cuchillas DE LA Segadora IMPULSI6N DE RecorridoMotor Para Usar EL Control DE LA ACELER- ACI6N DPara Ajustar LAS Ruedas CAUBRA- Doras CortePara Ajustar LA Altura DE Corte DE LA Segadora Para Operar LA SegadoraPara Transportar Remolque DE Carretillas O Otros AccesoriosPara Operar EN Cerros CronometroPara Hacer Arrancar EL Motor Arranque CON Tjempo TempladoArranque CON Tiempo Frio Antes DE Hacer ArrancarRgar LA Transmisjon Calentamiento Para LA Transmision AutomaticaConsejos Para Segar Recomendaciones Generales Programade MantenimientoAntes DE Cada USO Tractor Operaoion DEL FrenoLlantas Vfrifiiz Sistema Presencia OperadorMotor Enfriamiento DEL TransejeNivel DEL Fluido DE LA Bomba DEL Transeje Para Cambiar EL Aceite DEL MotorFiltro DE Combustible EN Linea LimpiezaLimpieza DE LA Entrada DE AIRE/AREAS DE Enfriamento SilenciadorCubierta PuertoLejos Servicio O DE Hacer Ajustes Para Desmontar LA CortadoraCuidado Instalar LA S,EGADORA Y LA CorreaPara Nivelar LA Segadora Regulacion Visual DE Lado a LadoREGULACI6N DE LA PRECISI6N DE Lado Ajuste DE Delante a AtrasPara Cambiar LA Correa DE IMPUL= SI6N DE MovimientoDesmontaje DE LA Correa Montaje DE LA Correa DE LA SEGA- DoraImpresion / Inclinacion DE LAS RUE= Para Verificar SI Funciona Bien EL FrenoPara Adjuntar LOS Cables DE Empalme Reemplazar LA BateriaPara Cambiar LA Bombilla DE LA LUZ Delantera Entreoierre Y RelesMotor CarburadorCilindros Aceite DEL MotorOtros Identificacion DE Problemas Problema Causa CorreccionEstrangulacion Choke EL MotorProblemacausa IDENTIFICACI6N DE ProblemasCorreccjon Iproblema Causa Correccion RapidoGUJASUGERiDAPARAMEDIR LAS Pendientes CON LA Vista Para UNA Your Home Our Home

YT 4500, 917.28990 specifications

The Craftsman 917.28990 YT 4500 is a robust lawn tractor that combines power and performance with comfort and ease of use, making it an ideal choice for homeowners with medium to large yards. With its impressive features and innovative technologies, this machine stands out in the competitive landscape of lawn care equipment.

At the heart of the Craftsman YT 4500 is a powerful 24 HP Kohler engine. This engine delivers reliable performance, ensuring that the tractor can tackle a variety of tasks from mowing to hauling and even towing. With a 42-inch cutting deck, the YT 4500 effectively maneuvers through tight corners and delivers a clean, professional-looking cut on your lawn.

One of the standout features of the Craftsman YT 4500 is its hydrostatic transmission, which provides effortless control and smooth operation. This technology allows users to change speed and direction easily without the need for constant gear shifting, enhancing the user experience, especially over extended periods of use.

The tractor also boasts a comfortable high-back seat with adjustable features, providing ample support during long mowing sessions. The ergonomically designed steering wheel allows for easy maneuverability, making it suitable for users of all sizes.

To improve efficiency, the YT 4500 is equipped with a cutting height adjustment feature, allowing users to select from multiple cutting heights to accommodate various grass types and conditions. This flexibility ensures optimal results year-round.

Additionally, the Craftsman 917.28990 includes a mulching feature, which finely chops grass clippings and returns them to the lawn as natural fertilizer, promoting a healthier lawn while reducing the need for bagging clippings. For those requiring extra versatility, the tractor is compatible with various attachments, including snow plows, baggers, and more, enabling year-round tasks.

Overall, the Craftsman 917.28990 YT 4500 is an excellent investment for any homeowner seeking reliability, comfort, and versatility in a lawn tractor. Its combination of power, advanced technologies, and thoughtful design ensures that lawn care can be both efficient and enjoyable. Whether you are tackling a simple mow or an extensive landscaping project, the YT 4500 proves to be a valuable addition to your outdoor equipment lineup.
Top Page Image Contents