Craftsman 917.27623 owner manual Fuel System, Engine OIL, Cylinders, Other

Page 29

Immediately prepare your tractor for stor- age at the end of the season or if the trac-

_91_,wAWillnot be used for 30 days or more. RNING: Never store the tractor

with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING" in the Maintenance section of this

manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected

and battery cleaned thoroughly (see "TO

CLEAN BATTERY AND TERMINALS" in the Maintenance section of this manual).

After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture

which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carbure- tor. Do not empty the gas tank and carbu- retor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark

plug hole(s)into cylinder(s).

3.Turn ignition key to start position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable pro- tective cover that does not retain mois-

ture. Do not use plastic. Plastic cannot

breathe which allows condensation to

form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

29

Image 29
Contents Criiftsmiih Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation II1. Children ServiceIV, Towing Safe Handling of GasolineGeneral Service Customer Responsibilities Sears Installation ServiceJJJ Steering WheelCheck Battery Tools Required for AssemblyUnpack Carton Before Removing Tractor from Skid Attach Steering WheelInstall Seat Install Mower and Drive Belt Connect Rear PinsAssemble Gauge Wheels to Mower Deck Attach Front PlateALL Belts ForPosition Property damage Tractor Stopping HOW USE Your TractorTo SET Parking Brake To Stop Mower Blades To Adjust Mower Cutting HeightTo Operate Mower Towing Carts and Other ATTACH- Ments To TransportBefore Starting the Engine Check Engine OIL Level ADD GasolineMowing Tips To Start EngineGeneral Recommendations Lubrication ChartOperator Presence System Reverse Operation System ROS TiresBlade Care Blade RemovalChecktransaxle OIL Level BatteryClean AIR INTAKE/COOLING Areas Clean AIR ScreenEngine OIL Filter AIR FilterTo Install Mower Vice or AdjustmentsTractor To Remove MowerSIDE-TO-SIDE Adjustment To Level Mower HousingBoth Front Plate Links Must be Equal in LengthMower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt To Replace Motion Drive Belt To Adjust Attachment ClutchTo Check and Adjust Brake Replacing Battery To Adjust Steering Wheel Align MentTo Start Engine with a Weak BAT Tery To Remove Wheel for RepairsTo Remove Hood and Grill AS Sembly To Replace Headlight BulbEngine To Adjust Carburetor To Adjust Choke ControlPreliminary Setting Final SettingEngine OIL Fuel SystemCylinders OtherStart Engine ProblemCause Problem Cause Correction TroubleshootingchartOFF Problem Cause CorrectionTractor - Model Number SchematicElectrical Part Description Tractor - Model Number 917,276230 Chassis and Enclosures Part Tractor - Model Number 917,276230 Ground Drive KEY Part Description Tractor - Model Number Ground DriveTractor - Model Number Steering Assembly KEY Part NO. no KEY Part Tractor - Model Number 917,276230KEY Part Description Tractor - Model Number Seat AssemblyKEY Wheels &TIRES DecalsKEY Part Lift AssemblyAcop v,.,v Tractor - Model Number Mower Deck Transaxle Dimensions Given U.S. inches @/18 HEAD/VALVE/BREATHER Crankcase IGNITION/ELECTRICAL AIR INTAKE/FILTRATION Not IllustratedOIL PAN / Lubrication J Starting System KEY Part Description OIL PAN/LUBRICATION Fuel Systemj Fuel System KEY Part NO. NO. Description Crankshaft KEY Part DescriptionExhaust KEY Part Description Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationPage Our Home

917.27623 specifications

The Craftsman 917.27623 is a versatile and robust lawn tractor designed to make lawn maintenance efficient and enjoyable. With its user-friendly features and advanced technologies, this machine enhances the mowing experience for homeowners and lawn care enthusiasts alike.

One of the standout features of the Craftsman 917.27623 is its powerful 24-horsepower Briggs & Stratton engine. This reliable engine provides ample power, facilitating smooth operation even during challenging mowing conditions. The engine is paired with a smooth hydrostatic transmission, which allows for effortless speed adjustments and greater control, making it easy to navigate around tight corners and obstacles in the yard.

The mower is equipped with a generous 46-inch cutting deck. This size strikes an ideal balance between maneuverability and cutting efficiency, allowing users to tackle medium to large yards in less time. The deck also features a three-blade system, ensuring that grass is cut evenly and cleanly, promoting overall lawn health. Moreover, the cutting height can be easily adjusted with a simple lever, offering users the flexibility to maintain their lawns at different heights based on personal preference and seasonal needs.

In terms of durability, the Craftsman 917.27623 boasts a robust steel frame that can withstand the rigors of regular lawn maintenance. The materials used in its construction are designed to resist rust and corrosion, enhancing the lifespan of the mower.

Ergonomics play a key role in the design of the Craftsman 917.27623. The tractor features a comfortable high-back seat that reduces fatigue during extended use. Additionally, the dual-lever steering provides enhanced maneuverability, making it easy to steer the mower in tight spaces or around landscaping features.

Another significant technology integrated into this mower is its mulching capability. By utilizing the optional mulching kit, users can finely chop grass clippings, allowing them to decompose and return nutrients to the lawn. This promotes a healthier lawn and reduces the need for additional fertilization.

Overall, the Craftsman 917.27623 stands out for its powerful performance, user-friendly features, and durability. With its optimal cutting system and thoughtful design, it serves as an excellent addition to any homeowner's lawn care arsenal, transforming the often mundane chore of mowing into a more pleasant and efficient task.