To Operate Mower, To USE Cruise Control

Craftsman 917.289283 To Operate Mower, To USE Cruise Control, System Characteristics

TO USE CRUISE CONTROL

The cruise control feature can be used for forward travel only.

SYSTEM CHARACTERISTICS

The cruise control should only be used

while mowing or transporting on relatively smooth, straight surfaces. Other condi- tions such as trimming at slow speeds may cause the cruise control to disen- gage. Do not use the cruise control on slopes, rough tertian or while trimmimg or turning.

•With forward drive pedal (K) depressed to desired speed, pull cruise control

lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever (A) determines the cutting height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted

when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain condi- tions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

1.Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual).

2.With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appro- priate hole. Tighten securely.

3.Repeat for all, installing gauge wheel in same adjustment hole.

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil condi- tions, height of grass and types of grass being mowed.

•The average lawn should be cut to ap-

proximately 2-1/2" during the cool sea- son and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut with at- tachment lift lever.

2.Start mower blades by engaging at- tachment clutch control.

917.289283, 917.28928 specifications

The Craftsman 917.289283 and 917.28928 are powerful lawn tractors designed for homeowners seeking exceptional performance, reliability, and innovation in their outdoor equipment. These models stand out in the market for their robust features and user-friendly technologies, making lawn care an efficient and enjoyable task.

One of the key features of the Craftsman 917.289283 and 917.28928 is their powerful engine. Equipped with a reliable engine, these tractors provide sufficient horsepower to tackle tough grass and uneven terrain. The engines deliver a strong torque, ensuring that homeowners can mow their lawns with confidence, regardless of the conditions.

Both models feature a 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting efficiency. The cutting deck design allows for a precise cut, ensuring that grass is trimmed evenly across various terrains. Additionally, the deck height can be easily adjusted to accommodate different grass lengths, providing versatility for lawn care.

The hydrostatic transmission featured in these tractors enhances driving experience, allowing for smooth acceleration and deceleration. Unlike traditional gear systems, the hydrostatic design enables users to control their speed with precision, making it easier to navigate around obstacles such as trees, flower beds, and garden decorations.

Another significant characteristic of the Craftsman 917.289283 and 917.28928 is their ergonomic design. The comfortable seat and steering wheel are adjustable, promoting ease of use for operators of all sizes. This level of comfort makes it easier for users to spend extended periods mowing without feeling fatigued.

Furthermore, the tractors come equipped with advanced safety features, including a safety switch under the seat that automatically shuts off the engine if the operator leaves the seat while the blades are engaged. This design element adds an extra layer of protection, particularly for households with children and pets.

In terms of maintenance, these Craftsman models are designed with convenience in mind. The easy-access engine and deck components allow users to perform routine maintenance tasks with minimal hassle. The onboard diagnostic system provides users with vital information regarding the tractor's performance, ensuring that it operates smoothly for years to come.

In conclusion, the Craftsman 917.289283 and 917.28928 empower homeowners with well-engineered lawn tractors that blend power, comfort, and safety. With their user-friendly features and dependable performance, these models are ideal choices for anyone looking to achieve a beautifully manicured lawn.