To Service Cartridge | Craftsman 917.289283 manual

Craftsman 917.289283 owner manual To Service Cartridge

6.Remove the drain tube and replace the cap onto the end of the drain valve.

7.Refill engine with oil through oil fill dip- stick tube. Pour slowly. Do not overfill.

For approximate capacity see "PROD-

UCT SPECIFICATIONS" section of this manual.

8.Use gauge on oil fill cap/dipstick for checking level. For accurate reading, insert dipstick into the tube and push down firmly into place before removing. Keep oil up to, but not over, the "FULl" line on dipstick. Push dipstick down firmly into the tube when finished.

AIR FILTER

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

1.Remove cover.

TO SERVICE PRE-CLEANER

2.Wash it in liquid detergent and water.

3.Squeeze it dry in a clean cloth.

4.Saturate it in engine oil. Wrap it in clean, absorbent cloth and squeeze to remove excess oil.

NOTE: If very dirty or damaged, replace pre-cleaner.

@zi Kn°bs'-,. :_:

Cover f\_ ..................

Foam	_._ ___	]
Pre-Cleaner_	_,_	"
	,%=	j'
TO SERVICE	CARTRIDGE

1.Clean cartridge by tapping gently on flat surface. If very dirty or damaged, replace cartridge.

2.Reinstall precleaner cartridge, cover and secure.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deteriora- tion of the cartridge. Do not oil cartridge.

Do not use pressurized air to clean or dry cartridge.

CLEAN AIR INTAKE/COOLING AREAS To insure proper cooling, make sure the grass screen, cooling fins, and other exter-

nal surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled. NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could cre- ate a fire hazard and/or damage.

SPARK PLUG(S)

Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are

shown in "PRODUCT SPECIFICATIONS" section of this manual.

IN-LINE FUEL FILTER

The fue! filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carbure-

tor, replacement is required.

1.With engine cool, remove filter and plug fuel line sections.

2.Place new fuel filter in position in fuel

line with arrow pointing towards carbu- retor.

3.Be sure there are no fuel line leaks and clamps are properly positioned.

4.Immediately wipe up any spilled gaso- line.

Clamp

917.289283, 917.28928 specifications

The Craftsman 917.289283 and 917.28928 are powerful lawn tractors designed for homeowners seeking exceptional performance, reliability, and innovation in their outdoor equipment. These models stand out in the market for their robust features and user-friendly technologies, making lawn care an efficient and enjoyable task.

One of the key features of the Craftsman 917.289283 and 917.28928 is their powerful engine. Equipped with a reliable engine, these tractors provide sufficient horsepower to tackle tough grass and uneven terrain. The engines deliver a strong torque, ensuring that homeowners can mow their lawns with confidence, regardless of the conditions.

Both models feature a 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting efficiency. The cutting deck design allows for a precise cut, ensuring that grass is trimmed evenly across various terrains. Additionally, the deck height can be easily adjusted to accommodate different grass lengths, providing versatility for lawn care.

The hydrostatic transmission featured in these tractors enhances driving experience, allowing for smooth acceleration and deceleration. Unlike traditional gear systems, the hydrostatic design enables users to control their speed with precision, making it easier to navigate around obstacles such as trees, flower beds, and garden decorations.

Another significant characteristic of the Craftsman 917.289283 and 917.28928 is their ergonomic design. The comfortable seat and steering wheel are adjustable, promoting ease of use for operators of all sizes. This level of comfort makes it easier for users to spend extended periods mowing without feeling fatigued.

Furthermore, the tractors come equipped with advanced safety features, including a safety switch under the seat that automatically shuts off the engine if the operator leaves the seat while the blades are engaged. This design element adds an extra layer of protection, particularly for households with children and pets.

In terms of maintenance, these Craftsman models are designed with convenience in mind. The easy-access engine and deck components allow users to perform routine maintenance tasks with minimal hassle. The onboard diagnostic system provides users with vital information regarding the tractor's performance, ensuring that it operates smoothly for years to come.

In conclusion, the Craftsman 917.289283 and 917.28928 empower homeowners with well-engineered lawn tractors that blend power, comfort, and safety. With their user-friendly features and dependable performance, these models are ideal choices for anyone looking to achieve a beautifully manicured lawn.