Craftsman 917.27377 manual Install Mulcher Plate, If previously removed, Check Deck Levelness

Page 10

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Deflector

Mulcher

Shield

Plate

 

Latch

Hooks

•ILCAUTION: Do not remove deflector shield from mower.

TO CONVERTTO BAGGING OR DISCHARGING

Simply remove mulcher plate and store in a safe place.Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulcher blades are designed for discharging and bagging also.

CHECKTIRE PRESSURE

The tires on your tractor were overin- flated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous-

ing should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service

and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in

the Service and Adjustments section of this manual.

JCHECKLIST

Before you operate and enjoy your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product.

Please review the following checklist: ,/All assembly instructions have been

completed.

,/No remaining loose parts in carton. ,/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). ,/Seat is adjusted comfortably and tight-

ened securely.

,/All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

,/Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/Check wiring. See that all connections are still secure and wires are properly clamped.

While learning how to use your tractor, pay

extra attention to the following important items:

,/Engine oil is at proper level.

,/Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

,/Become familiar with all controls - their

location and function. Operate them before you start the engine.

,/Be sure brake system is in safe oper- ating condition.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Icrrftsmrni Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation IV. Service Do notPage Customer Responsibilities Product SpecificationsSears Installation Service Repair Protection AgreementsSeat Steering WheelKeys Slope Sheet To Remove Tractor from Howto SET UP Your TractorTools Required for Assembly Before Removing Tractor from Skid Attach Steering WheelInstall Seat To Rolltractor OFF Skid SeeCheck Deck Levelness Install Mulcher PlateIf previously removed Check for Proper Position of ALL Belts@@@@@ Know Your Tractor Attachment Clutch Lever UsedTo SET Parking Brake HOW to USE Your TractorTo Move Forward and Backward To Operate To Adjust Gauge WheelsTo Stop Mower Blades On HillsADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start EngineMowing Tips Mulching Mowing TipsBefore Each USE ChartGeneral Recommendations LubricationBlade Removal TractorTo Sharpen Blade Engine BatteryTo Clean Battery and Terminals Transaxle CoolingAIR Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas IN-LINE Fuel FilterTractor CleaningTo Install Mower To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentTo Adjust Brake Belt InstallationTo Check and Adjust Brake To Check BrakeTransaxle Gear Shift Lever NEU- Tral Adjustment Front Wheel TOE-IN/CAMBERTo Attach Jumper Cables Replacing BatteryTo Start Engine with a Weak BAT- TE RY Interlocks and RelaysTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor Fuel System BatteryRemove mower from tractor for winter Engine OILIgnition switch Troubleshooting ChartCause Correction Problem Cause Problem Cause Correction Tractor - Model Number Schematic RED01115BLACKTractor - Model Number Electrical KEY Part Description Tractor -- Model Number 917.273770 Chassis and Enclosures 175710 Pivot Bracket Tractor -- Model Number Ground Drive X .1845/1865 Tractor -- Model Number Steering Steering Tractor -- Model Number Engine 137180 Tractor -- Model Number Seat Assembly KEY PartTractor -- Model Number Decals 186388Tractor -- Model Number Lift Assembly Tractor -- Model Number Lift Assembly 1o6 1o2 1o3los Tractor -- Model Number Mower DeckOnly 35A Teeth 523 51B 20@ 220 798 697890 Screw Suggested Guide for Sighting Slopes for Safe Operation 6E/A R,. o 4,0

917.27377 specifications

The Craftsman 917.27377 is a robust lawn mower designed to provide homeowners with an efficient and reliable solution for lawn maintenance. Renowned for its durability and user-friendly features, it stands as a testament to Craftsman’s commitment to quality.

One of the standout features of the 917.27377 is its powerful engine. Equipped with a 17.5 HP Briggs & Stratton engine, it delivers ample power for tackling tough grass, ensuring that both small yards and larger lawns are easily managed. The engine is also designed for easy starting, minimizing the frustration often associated with mower maintenance.

The cutting deck of the Craftsman 917.27377 measures 42 inches, allowing for a wide cutting path that reduces mowing time. This size is particularly advantageous for homeowners with moderately-sized lawns, providing a balance between maneuverability and efficiency. The deck is constructed with robust materials that ensure longevity while featuring a reinforced washout port for easy cleaning after use, which helps maintain optimal performance.

Another characteristic that sets the Craftsman 917.27377 apart is its adjustable cutting height, which offers a range from 1.5 inches to 4 inches. This flexibility allows homeowners to customize their mowing experience based on the season and grass type, promoting a healthier lawn. The mower also features an easy-to-use lever that allows for quick adjustments without needing any tools.

Technologically, the Craftsman 917.27377 stands out with its automatic transmission, providing smooth and effortless speed adjustments as you mow. This feature enhances user experience, particularly in varying terrain, since the mower can easily adapt to inclines and declines.

Comfort is also a priority in the design of the Craftsman 917.27377. It includes a plush seating area with an ergonomic design that helps reduce fatigue during extended use. The operator's controls are strategically positioned, making them easily accessible to enhance safety and convenience while mowing.

In conclusion, the Craftsman 917.27377 is an impressive lawn mower combining power, versatility, and comfort. Its reliable engine, generous cutting deck, adjustable height settings, and user-friendly technology make it an ideal choice for homeowners seeking to maintain their lawns with ease and efficiency. The Craftsman 917.27377 exemplifies the brand's dedication to delivering high-quality lawn care products that meet the needs of various users.
Top Page Image Contents