Craftsman 917.27377 manual Tractor, Cleaning, To Remove Mower, To Install Mower

Page 21

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with auto- motive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

I& VICEARNING:OR ADJUSTMENTS:TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER-

1.Depress clutch/brake pedal fully and set parking brake.

2.Place gearshift lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key to "STOP" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the

right side of tractor.

1.Place attachment clutch in "DISEN- GAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and remove clutch spring off pulley bolt.

5.Remove large retainer spring, slide

collar off and push housing guide out of bracket.

6.Disconnect anti-sway bar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer

springs.

Small

Clutch

Small

Clutch Spring

Retainer

Anti-Swa_

Housing

8.Disconnect front links from deck by removing retainer springs.

9.Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook the clutch spring Into square hole in frame.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with deflec- tor shield to right side of tractor.

3.Lower lift lever to its lowest position.

4.Connect front links to mower deck and secure with retainer springs.

5.Connect suspension arms to rear deck brackets and secure with retainer

springs.

Flat " . "-_-_, ._-_÷'_- -"

_'-,;_.- _"

Square Hole

line Pulley

Front Link

Retainer Springs

Both Sides)

Bracket

Large Retainer Spring

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Icrrftsmrni Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentGeneral Operation Do not IV. ServicePage Sears Installation Service Product SpecificationsCustomer Responsibilities Repair Protection AgreementsSteering Wheel SeatKeys Slope Sheet Tools Required for Assembly Howto SET UP Your TractorTo Remove Tractor from Before Removing Tractor from Skid Attach Steering WheelTo Rolltractor OFF Skid See Install SeatIf previously removed Install Mulcher PlateCheck Deck Levelness Check for Proper Position of ALL Belts@@@@@ Attachment Clutch Lever Used Know Your TractorHOW to USE Your Tractor To SET Parking BrakeTo Move Forward and Backward To Stop Mower Blades To Adjust Gauge WheelsTo Operate On HillsCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start EngineMulching Mowing Tips Mowing TipsGeneral Recommendations ChartBefore Each USE LubricationTractor Blade RemovalTo Sharpen Blade To Clean Battery and Terminals BatteryEngine Transaxle CoolingClean AIR INTAKE/COOLING Areas Clean AIR ScreenAIR Filter IN-LINE Fuel FilterTo Install Mower CleaningTractor To Remove MowerSIDE-TO-SIDE Adjustment To Level Mower HousingTo Check and Adjust Brake Belt InstallationTo Adjust Brake To Check BrakeFront Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEU- Tral AdjustmentTo Start Engine with a Weak BAT- TE RY Replacing BatteryTo Attach Jumper Cables Interlocks and RelaysTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor Remove mower from tractor for winter BatteryFuel System Engine OILTroubleshooting Chart Ignition switchCause Correction Problem Cause Problem Cause Correction RED01115BLACK Tractor - Model Number SchematicTractor - Model Number Electrical KEY Part Description Tractor -- Model Number 917.273770 Chassis and Enclosures 175710 Pivot Bracket Tractor -- Model Number Ground Drive X .1845/1865 Tractor -- Model Number Steering Steering Tractor -- Model Number Engine 137180 KEY Part Tractor -- Model Number Seat Assembly186388 Tractor -- Model Number DecalsTractor -- Model Number Lift Assembly Tractor -- Model Number Lift Assembly Tractor -- Model Number Mower Deck 1o6 1o2 1o3losOnly 35A Teeth 523 51B 20@ 220 798 697890 Screw Suggested Guide for Sighting Slopes for Safe Operation 6E/A R,. o 4,0

917.27377 specifications

The Craftsman 917.27377 is a robust lawn mower designed to provide homeowners with an efficient and reliable solution for lawn maintenance. Renowned for its durability and user-friendly features, it stands as a testament to Craftsman’s commitment to quality.

One of the standout features of the 917.27377 is its powerful engine. Equipped with a 17.5 HP Briggs & Stratton engine, it delivers ample power for tackling tough grass, ensuring that both small yards and larger lawns are easily managed. The engine is also designed for easy starting, minimizing the frustration often associated with mower maintenance.

The cutting deck of the Craftsman 917.27377 measures 42 inches, allowing for a wide cutting path that reduces mowing time. This size is particularly advantageous for homeowners with moderately-sized lawns, providing a balance between maneuverability and efficiency. The deck is constructed with robust materials that ensure longevity while featuring a reinforced washout port for easy cleaning after use, which helps maintain optimal performance.

Another characteristic that sets the Craftsman 917.27377 apart is its adjustable cutting height, which offers a range from 1.5 inches to 4 inches. This flexibility allows homeowners to customize their mowing experience based on the season and grass type, promoting a healthier lawn. The mower also features an easy-to-use lever that allows for quick adjustments without needing any tools.

Technologically, the Craftsman 917.27377 stands out with its automatic transmission, providing smooth and effortless speed adjustments as you mow. This feature enhances user experience, particularly in varying terrain, since the mower can easily adapt to inclines and declines.

Comfort is also a priority in the design of the Craftsman 917.27377. It includes a plush seating area with an ergonomic design that helps reduce fatigue during extended use. The operator's controls are strategically positioned, making them easily accessible to enhance safety and convenience while mowing.

In conclusion, the Craftsman 917.27377 is an impressive lawn mower combining power, versatility, and comfort. Its reliable engine, generous cutting deck, adjustable height settings, and user-friendly technology make it an ideal choice for homeowners seeking to maintain their lawns with ease and efficiency. The Craftsman 917.27377 exemplifies the brand's dedication to delivering high-quality lawn care products that meet the needs of various users.
Top Page Image Contents