Craftsman 917.2738 owner manual Tractor, To Install Mower

Page 23

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER- VICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key to "STOP" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

1.Place attachment clutch in "DISEN- GAGED" position.

2.Move attachment lift lever forward to lower mower to its lowest position.

3.Roll belt off engine pulley.

4.Remove small retainer spring, and remove clutch spring off pulley bolt.

5.Remove large retainer spring, slide

collar off and push housing guide out of bracket.

6.Disconnect anti-sway bar from chassis bracket by removing retainer spring.

7.Disconnect suspension arms from rear deck brackets by removing retainer springs.

8.Disconnect front links from deck by removing retainer springs.

9.Raise lift lever to raise suspension arms. Slide mower out from under trac-

tor.

Small Retainer S

Clutch

Small Retainer S

Clutch Spring

Anti-Sway

Housing

Guide

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook

the clutch spring Into square hole in frame.

TO INSTALL MOWER

1.Raise attachment lift lever to its highest position.

2.Slide mower under tractor with deflec- tor shield to right side of tractor.

3.Lower lift lever to its lowest position.

4.Connect front links to mower deck and secure with retainer springs.

5.Connect suspension arms to rear deck brackets and secure with retainer

springs.

6.Connect anti-sway bar to chassis bracket and secure with retainer

spring.

7.Push clutch cable housing guide into bracket, slide collar onto guide and secure with large retainer spring.

8.Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

9.Install belt onto engine pulley.

\Retainer Springs Both Sides)

Bracket

Large Retainer Spring

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Jcriiftsmiinj Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationIII. Children IV. ServiceDo not Across UIR Product SpecificationsSears Installation Service Customer ResponsibilitiesKeys Steering WheelTo Remove Tractor from Howto SET UP Your TractorTools Required for Assembly Check BatteryAdj Install SeatCheck Brake System Install Mulcher PlateCheck Deck Levelness Check for Proper Position of ALL Belts@@@@@ Motion Control Lever Selects Discharging of battery Attachment Clutch Lever UsedKnow Your Tractor To USE Throttle Control HOW to USE Your TractorTo Adjust Mower Cutting Height To SET Parking BrakeDo not drive up or down To Adjust Gauge WheelsTo Operate Mower To Operate On HillsADD Gasoline Transmission Engaged Transmission DisengagedBefore Starting the Engine Check Engine OIL LevelPurge Transmission AutomatictransmissionwarmupImportant For best performance, keep Mowing TipsMulching Mowing Tips Before Each USE Lubrication ChartGeneral Recommendations AsyoucompleteTo Sharpen Blade TractorOperator Presence System Blade RemovalEngine Lubrication To Clean Battery and TerminalsTransaxle Pump Fluid BeltsEngine OIL Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas AIR FilterIN-LINE Fuel Filter CleaningMuffler Spark PlugsTo Install Mower 0round To Level Mower HousingTo Replace Mower Blade Drive Belt To Check and Adjust BrakeTo Remove Wheel for Repairs Transmission Removal ReplacementFront Wheel TOE-IN/CAMBER Interlocks and Relays Replacing BatteryTo Start Engine with a Weak BAT- TE RY To Attach Jumper CablesCarburetor EngineFuel System BatteryEngine Will not start Hard to start Engine will not turn over Troubleshooting ChartProblem Loss of powerTo run when ExcessiveVibration Engine continuesProblem Cause Correction Troubleshooting ChartWiring Insulated Clips Tractor - Model Number SchematicTractor - Model Number ELECTRICAL22 KEY Part Description Tractor - Model Number ElectricalTractor - Model Number 917.273800 Chassis and Enclosures 206 Tractor - Model Number Ground Drive Link Transaxle Tractor - Model Number 917.273800 Steering Assembly Tractor - Model Number 917.273800 Steering Assembly Tractor - Model Number Tractor - Model Number Engine Tractor - Model Number Seat Assembly KEY Part Wheels &TIRES Tractor - Model Number DecalsTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck 14//FF165892 Mower Housing 165723 Illc 71idx1.15odx.030thk Flywheel f Control KEY NO. Partno IGNiTiON Coil Cylinder Head Labels Exhaust Pipe KEY NO. Part no Description Page Suggested Guide for Sighting Slopes for Safe Operation Your Home

917.2738 specifications

The Craftsman 917.2738 is a versatile and reliable lawn tractor designed for homeowners seeking an efficient solution for yard maintenance. This lawn tractor combines power, durability, and user-friendly features, making it an ideal choice for those with medium to large-sized lawns.

One of the standout features of the Craftsman 917.2738 is its robust engine. Powered by a reliable Briggs & Stratton engine, it provides the necessary torque and performance to tackle a variety of mowing tasks. The engine is designed for easy starting and dependable operation, ensuring that users spend less time worrying about maintenance and more time enjoying their landscaped surroundings.

The cutting deck of the Craftsman 917.2738 is another key feature, boasting a 42-inch size that allows for efficient mowing of large areas. The cutting height can be easily adjusted, offering users the flexibility to choose from multiple settings to suit their lawn’s needs. This feature not only enhances cutting performance but also promotes a healthier lawn by allowing for optimal grass growth.

Additionally, the tractor incorporates a hydrostatic transmission, which offers a smooth and intuitive driving experience. This technology removes the need for shifting gears, enabling operators to maintain control while navigating tricky terrain or tight spots. The responsive steering and maneuverability enhance the overall usability, making it easy for users to navigate around flower beds, trees, and other obstacles.

Another characteristic of the Craftsman 917.2738 is comfort and ergonomics. The tractor features a comfortable operator seat with ample padding, allowing users to mow for extended periods without discomfort. The easy-to-reach controls provide convenience and make operating the mower straightforward for both experienced gardeners and beginners alike.

Durability is an essential aspect of the Craftsman brand, and the 917.2738 lives up to this reputation with its sturdy chassis and high-quality materials. This ensures that the tractor can withstand regular wear and tear, making it a dependable choice for long-term lawn care.

Overall, the Craftsman 917.2738 combines powerful performance, innovative features, and comfort, making it a great investment for homeowners looking to efficiently maintain their lawns. With its balanced design and high-quality engineering, it stands out as a reliable workhorse in the realm of lawn tractors.
Top Page Image Contents