Craftsman 917.2738 Transmission Engaged Transmission Disengaged, Before Starting the Engine

Page 15

Transmission Engaged

Transmission Disengaged

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord,

etc.).

TOWING CARTS AND OTHER ATTACH-

MENTS

Tow only the attachments that are recom- mended by and comply with specifications

of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous.

Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Unthread and remove oil fill cap/ dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do not thread the cap onto the tube. Remove and read oil level. If necessary, add oil until "FULL'

mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual).

To change engine oil, see the Mainte- nance section in this manual.

ADD GASOLINE

Fill fuel tank to bottom of tank filler neck.

Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will in- crease carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quanti- ties that can be used within 30 days to assure fuel freshness.

_CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in tempera- tures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separa- tion and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the transmission engaged position.

2.Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

3.Place motion control lever in neutral

(N)position.

4.Move attachment clutch to disengaged position.

5.Move throttle control to fast position

6.Pull choke control out for a cold engine start attempt. For a warm engine start attempt the choke control may not be needed.

NOTE: Before starting, read the warm and cold starting procedures below.

7.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do

not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, push choke control in, wait a few minutes and try again. If engine still does not start, pull the choke con- trol out and retry.

15

Image 15
Contents Jcriiftsmiinj Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationIV. Service Do notIII. Children Across UIR Product SpecificationsSears Installation Service Customer ResponsibilitiesKeys Steering WheelTo Remove Tractor from Howto SET UP Your TractorTools Required for Assembly Check BatteryAdj Install SeatCheck Brake System Install Mulcher PlateCheck Deck Levelness Check for Proper Position of ALL Belts@@@@@ Discharging of battery Attachment Clutch Lever Used Know Your TractorMotion Control Lever Selects To USE Throttle Control HOW to USE Your TractorTo Adjust Mower Cutting Height To SET Parking BrakeDo not drive up or down To Adjust Gauge WheelsTo Operate Mower To Operate On HillsADD Gasoline Transmission Engaged Transmission DisengagedBefore Starting the Engine Check Engine OIL LevelPurge Transmission AutomatictransmissionwarmupMowing Tips Mulching Mowing TipsImportant For best performance, keep Before Each USE Lubrication ChartGeneral Recommendations AsyoucompleteTo Sharpen Blade TractorOperator Presence System Blade RemovalEngine Lubrication To Clean Battery and TerminalsTransaxle Pump Fluid BeltsEngine OIL Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas AIR FilterIN-LINE Fuel Filter CleaningMuffler Spark PlugsTo Install Mower 0round To Level Mower HousingTo Replace Mower Blade Drive Belt To Check and Adjust BrakeTransmission Removal Replacement Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs Interlocks and Relays Replacing BatteryTo Start Engine with a Weak BAT- TE RY To Attach Jumper CablesCarburetor EngineBattery EngineFuel System Will not start Hard to start Engine will not turn over Troubleshooting ChartProblem Loss of powerTo run when ExcessiveVibration Engine continuesProblem Cause Correction Troubleshooting ChartWiring Insulated Clips Tractor - Model Number SchematicTractor - Model Number ELECTRICAL22 KEY Part Description Tractor - Model Number ElectricalTractor - Model Number 917.273800 Chassis and Enclosures 206 Tractor - Model Number Ground Drive Link Transaxle Tractor - Model Number 917.273800 Steering Assembly Tractor - Model Number 917.273800 Steering Assembly Tractor - Model Number Tractor - Model Number Engine Tractor - Model Number Seat Assembly KEY Part Wheels &TIRES Tractor - Model Number DecalsTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck 14//FF165892 Mower Housing 165723 Illc 71idx1.15odx.030thk Flywheel f Control KEY NO. Partno IGNiTiON Coil Cylinder Head Labels Exhaust Pipe KEY NO. Part no Description Page Suggested Guide for Sighting Slopes for Safe Operation Your Home

917.2738 specifications

The Craftsman 917.2738 is a versatile and reliable lawn tractor designed for homeowners seeking an efficient solution for yard maintenance. This lawn tractor combines power, durability, and user-friendly features, making it an ideal choice for those with medium to large-sized lawns.

One of the standout features of the Craftsman 917.2738 is its robust engine. Powered by a reliable Briggs & Stratton engine, it provides the necessary torque and performance to tackle a variety of mowing tasks. The engine is designed for easy starting and dependable operation, ensuring that users spend less time worrying about maintenance and more time enjoying their landscaped surroundings.

The cutting deck of the Craftsman 917.2738 is another key feature, boasting a 42-inch size that allows for efficient mowing of large areas. The cutting height can be easily adjusted, offering users the flexibility to choose from multiple settings to suit their lawn’s needs. This feature not only enhances cutting performance but also promotes a healthier lawn by allowing for optimal grass growth.

Additionally, the tractor incorporates a hydrostatic transmission, which offers a smooth and intuitive driving experience. This technology removes the need for shifting gears, enabling operators to maintain control while navigating tricky terrain or tight spots. The responsive steering and maneuverability enhance the overall usability, making it easy for users to navigate around flower beds, trees, and other obstacles.

Another characteristic of the Craftsman 917.2738 is comfort and ergonomics. The tractor features a comfortable operator seat with ample padding, allowing users to mow for extended periods without discomfort. The easy-to-reach controls provide convenience and make operating the mower straightforward for both experienced gardeners and beginners alike.

Durability is an essential aspect of the Craftsman brand, and the 917.2738 lives up to this reputation with its sturdy chassis and high-quality materials. This ensures that the tractor can withstand regular wear and tear, making it a dependable choice for long-term lawn care.

Overall, the Craftsman 917.2738 combines powerful performance, innovative features, and comfort, making it a great investment for homeowners looking to efficiently maintain their lawns. With its balanced design and high-quality engineering, it stands out as a reliable workhorse in the realm of lawn tractors.