Tractor, Operator Presence System | Craftsman 917.2738 guide

Craftsman 917.2738 owner manual Tractor, Operator Presence System, Blade Removal, To Sharpen Blade

TRACTOR

Always observe safety rules when per- forming any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest

gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and

Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rub-

ber.

•Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts

dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your trac- tor does not function as described, repair the problem immediately.

•The engine should not start unless

the brake pedal is fully depressed and attachement clutch control is in the

disengaged position.

•When the engine is running, any at-

tempt by the operator to leave the seat without first setting the parking brake

should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any at-

tempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never op-

erate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

2.Remove blade bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade

with trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble blade bolt, lock washer and flat washer in exact order as shown.

5.Tighten blade bolt securely (27-35 Ft.

Lbs. torque).

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approve bolt shown in the Repair Parts.

TrailingMandrel

UpAssembly

Flat

Washer\

Lock

Blade Bolt

"_ " Hole

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause

excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the

bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center	Hole
5/8" Bolt	Blade
or Pin

917.2738 specifications

The Craftsman 917.2738 is a versatile and reliable lawn tractor designed for homeowners seeking an efficient solution for yard maintenance. This lawn tractor combines power, durability, and user-friendly features, making it an ideal choice for those with medium to large-sized lawns.

One of the standout features of the Craftsman 917.2738 is its robust engine. Powered by a reliable Briggs & Stratton engine, it provides the necessary torque and performance to tackle a variety of mowing tasks. The engine is designed for easy starting and dependable operation, ensuring that users spend less time worrying about maintenance and more time enjoying their landscaped surroundings.

The cutting deck of the Craftsman 917.2738 is another key feature, boasting a 42-inch size that allows for efficient mowing of large areas. The cutting height can be easily adjusted, offering users the flexibility to choose from multiple settings to suit their lawn’s needs. This feature not only enhances cutting performance but also promotes a healthier lawn by allowing for optimal grass growth.

Additionally, the tractor incorporates a hydrostatic transmission, which offers a smooth and intuitive driving experience. This technology removes the need for shifting gears, enabling operators to maintain control while navigating tricky terrain or tight spots. The responsive steering and maneuverability enhance the overall usability, making it easy for users to navigate around flower beds, trees, and other obstacles.

Another characteristic of the Craftsman 917.2738 is comfort and ergonomics. The tractor features a comfortable operator seat with ample padding, allowing users to mow for extended periods without discomfort. The easy-to-reach controls provide convenience and make operating the mower straightforward for both experienced gardeners and beginners alike.

Durability is an essential aspect of the Craftsman brand, and the 917.2738 lives up to this reputation with its sturdy chassis and high-quality materials. This ensures that the tractor can withstand regular wear and tear, making it a dependable choice for long-term lawn care.

Overall, the Craftsman 917.2738 combines powerful performance, innovative features, and comfort, making it a great investment for homeowners looking to efficiently maintain their lawns. With its balanced design and high-quality engineering, it stands out as a reliable workhorse in the realm of lawn tractors.