Craftsman 917.2720601 manual To Convertto Bagging or Discharging, Check Tire Pressure

Page 10

INSTALL MULCHER PLATE

CHECK BRAKE SYSTEM

 

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Mulcher

DeflectorPlate

Shield

Latch

Hooks

A

_1_ CAUTION: Do not remove deflector shield from mower. Raise and hold shield

when attaching mulcher plate and allow it to rest on plate while in operation.

TO CONVERTTO BAGGING OR DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulching blades are

designed for discharging and bagging also.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See "TO

LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

After you learn how to operate your tractor, check to see that the brake is

properfy adjusted. See "1"OADJUST

BRAKE" in the Service and Adjustments section of this manual.

V' CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this quality product.

Please review the following checklist: ,/ All assembly instructions have been

completed.

,/No remaining loose parts in carton.

/Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps).

/Seat is adjusted comfortably and

tightened securely.

,/All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

,/Be sure mower deck is propedy leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated

for leveling).

,/Check mower and drive belts. Be sure

they are muted propedy around pulleys and inside all belt keepers.

/Check wiring. See that all connections are still secure and wires are properly clamped.

•/ Before ddving tractor, be sure free- wheel control is in =transmission

engaged" position (see "TO TRANS-

PORT" in the Operation section of this manual).

While learning how to use your tractor, pay extra attention to the following important items:

,/Engine oil is at proper level.

•/ Fuel tank is filled with fresh, clean,

regular unleaded gasoline.

/Become familiar with all controls - their

location and function. Operate them before you start the engine.

,/Be sure brake system is in safe operating condition.

,/It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE" and "PURGE

TRANSMISSION" in the Operation section of this manual).

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Icraftsmani Sears Craftsman Help Line 5 am 5 pro, Mon SatLimited Warranty on Craftsman Riding Equipment II. Slope Operation General OperationIV. Service Do notPage Repair Agreement Customer ResponsibilitiesFor Future Use 28 x 1-1/4To Remove Tractor from Carton Before Removing Tractor from Skid Attach Steering WheelLabel Terminal Install SeatRelease parking brake by depressing clutch/brake pedal Check Tire Pressure Install Mulcher Plate Check Brake SystemTo Convertto Bagging or Discharging Check Deck LevelnessAutomatic Models only Freewheel Control Know Your TractorPlunger Disengagages transmission for pushingHOW to USE Your Tractor Gaug To Adjust Gauge WheelsTo Operate on Hills To Operate MowerADD Gasoline Before Starting the Engine Check Engine OIL LevelTo Start Engine Automatictransmissionwarmup Purge TransmissionMowing Tips Mulching Mowing TipsCh=,v-Bait Lubrication ChartGeneral Recommendations Before Each USEBrake Operation BatteryTractor TiresEngine Engine OIL Filter Clean AIR ScreenAIR Filter Muffler CleaningClean AIR INTAKE/COOLING Areas Spark PlugsTo Remove Mower To Install MowerTractor PulleyFRONT-TO-BACK Adjustment To Level Mower HousingSIDE-TO-SIDE Adjustment Belt InstallationNut Jam Nut To Adjust BrakeWith Parking Brake To Replace Motion Drive BeltTransmission REMOVAL/REPLACE- Ment Transaxle Motion Control Lever Neutral AdjustmentTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Replace Headlight Bulb To Remove CABLES, Reverse OrderReplacing BAI-FERY Interlocks and RelaysAcceleration Test To Adjust CarburetorThr ttle Idle Speed AdjustingI ScrewTractor OtherEngine Problem Troubleshooting ChartCause Correction Troubleshooting Chart Problem Cause CorrectionSlow Problem Cause CorrectionFast OFFSchematic Tractor --MODEL NumberTRACTOR-- Modelnumber ElectricalTractor --MODEL Number Electrical KEY Part DescriptionTractor -- Model Number 917.2720601 Chassis and Enclosures Tractor --MODEL Number 917.2720601 Chassis and Enclosures KEY Part DescriptionTRACTOR-- Model Number Grounddrive Ground Drive Tractor -- Model Number 917.2720601 Steering Assembly Tractor - Model Number 917.2720601 Steering Assembly KEY Part NO. NO. DescriptionOptional Equipment Tractor -- Model Number EngineSpark Arrester Tractor -- Model Number Liftassembly KEY Part NO. no DescriptionSeat Assembly Tractor --MODEL Number Decals Wheels & TiresMowerdeck Mower Deck Mi= Tractor -- Model Number Hydro Gear Transaxle - Model Number 142883Cylinder HEAD, Valve and Breather Crankcasej 041 03-S KEY Part NO. no3NITIONIELECTRICAL Blower Housing and Baffles AIR Intake Not Illustrated Starting System Engine Controls OIL PAN I Lubrication J OIL PAN/LUBRICATION Starting System KEY Part DescriptionCrankshaftexhaust SScrew, thread forming M5x0.8xl SKit, solenoid repairPage Suggested Guide for Sighting Slopes for Safe Operation M 5 pm., CST, Mort.- Sat Rn.-8 p m. EST, M- F, 4 p m S 6am -11 pm, 7 daysaweekSU-HOGAR sa 888-784.-6427

917.2720601 specifications

The Craftsman 917.2720601 is a standout lawn tractor that combines robust functionality with user-friendly features, making it a go-to choice for many homeowners looking to maintain their yards efficiently. With its powerful performance and innovative technologies, this model is designed to enhance the mowing experience while ensuring durability and reliability.

One of the main features of the Craftsman 917.2720601 is its engine. Powered by a reliable 19 horsepower Briggs & Stratton engine, it provides ample power to efficiently cut through thick grass and tackle various landscaping tasks. The engine is equipped with an automatic choke system, ensuring easy starts in various weather conditions.

The cutting deck plays a crucial role in the effectiveness of any lawn tractor, and the 917.2720601 does not disappoint. It features a 42-inch cutting deck, which allows for a wide cutting path, reducing the time spent mowing large areas. The deck height can be easily adjusted with a simple lever, providing six different height positions. This feature allows users to achieve the perfect cut, whether they prefer a manicured look or a more natural appearance.

One of the standout technologies integrated into this lawn tractor is the Easy Access battery and fuel system. This design enhances user convenience by allowing quick access for maintenance checks and fuel refills. Additionally, with its hydrostatic transmission, the Craftsman 917.2720601 offers smooth and reliable speed control, making it easy for users to navigate different terrains without any hassle.

Comfort is also a priority with this model. The tractor features an adjustable high back seat, designed to provide optimum support during prolonged use. Large, durable wheels ensure stability and traction on uneven ground, enhancing the overall mowing experience.

Safety features are another important aspect of this tractor. It includes a safety switch that prevents operation when the seat is unoccupied, reducing the risk of accidents. The easy-to-use controls are intuitively designed, allowing even novice users to operate the tractor with confidence.

In conclusion, the Craftsman 917.2720601 is a well-rounded lawn tractor that offers a combination of power, versatility, and comfort. With its robust engine, efficient cutting deck, user-friendly features, and safety technologies, it's an ideal choice for anyone looking to achieve a beautifully maintained lawn with ease. Whether for small or large yards, this tractor is equipped to meet a variety of mowing needs.
Top Page Image Contents