Craftsman 917.2720601 manual Engine OIL Filter, AIR Filter, Clean AIR Screen

Page 21

8. Use gaugeon oil fill cap/dipstick for

checking level. Insert dipstick into the tube and rest the oil fill cap on the tube. Do not thread the cap onto the

tube when taking reading. Keep oil at "FULU' line on dipstick. Tighten cap onto the tube securely when finished.

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.

1.Drain oil from engine crankcase (See "TO CHANGE ENGINE OIL" in this

section of manual, through step remove drain plug).

2.Remove oil filter and wipe off filter adapter.

3.Apply a thin coating of new engine oil to the rubber gasket on replacement oil filter.

4.Install replacement oil filter on filter adapter. Turn oil filter clockwise until rubber gasket contacts the filter

adapter, then tighten filter an addi- tional 1/2 turn.

5.Fill crankcase with new oil (See "TO CHANGE ENGINE OIL" in this section

of manual). For approximate capacity see "PRODUCT SPECIFICATIONS"

section of this manual.

6.Start the engine and check for oil leaks. Correct any leaks before placing engine into full operation.

)i(Filter

AIR FILTER

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

1.Remove knob and cover.

2.Remove wing nut and air cleaner from base.

TO SERVICE PRE-CLEANER

3.Slide foam pre-cleaner off cartridge.

4.Wash it in liquid detergent and water.

5.Squeeze it dry in a clean cloth. Allow it to dry.

6.Saturate it in engine oil. Wrap it in clean, absorbent cloth and squeeze to remove excess oil.

TO SERVICE CARTRIDGE

1.Replace a dirty, bent, or damaged cartridge.

NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge.

2.Reinstall the pre-cleaner (cleaned and oiled) over the paper cartridge.

3.Reassemble air cleaner, wing nut, cover and tighten knob securely.

Air Cleaner

Cover

Cover

(nob

Foam

Nut

 

Pre-

Rubber

Cleaner

 

Paper

Ca_ridge

Base

Cap/

ScreenDipstick

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubbom dried gum fibers.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Sears Craftsman Help Line 5 am 5 pro, Mon Sat IcraftsmaniLimited Warranty on Craftsman Riding Equipment General Operation II. Slope OperationDo not IV. ServicePage Customer Responsibilities Repair Agreement28 x 1-1/4 For Future UseBefore Removing Tractor from Skid Attach Steering Wheel To Remove Tractor from CartonInstall Seat Label TerminalRelease parking brake by depressing clutch/brake pedal To Convertto Bagging or Discharging Install Mulcher Plate Check Brake SystemCheck Tire Pressure Check Deck LevelnessAutomatic Models only Plunger Know Your TractorFreewheel Control Disengagages transmission for pushingHOW to USE Your Tractor To Operate on Hills To Adjust Gauge WheelsGaug To Operate MowerBefore Starting the Engine Check Engine OIL Level ADD GasolineTo Start Engine Purge Transmission AutomatictransmissionwarmupMulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartCh=,v-Bait Before Each USETractor BatteryBrake Operation TiresEngine Clean AIR Screen Engine OIL FilterAIR Filter Clean AIR INTAKE/COOLING Areas CleaningMuffler Spark PlugsTractor To Install MowerTo Remove Mower PulleySIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment Belt InstallationWith Parking Brake To Adjust BrakeNut Jam Nut To Replace Motion Drive BeltTo Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control Lever Neutral AdjustmentTransmission REMOVAL/REPLACE- Ment Front Wheel TOE-IN/CAMBERReplacing BAI-FERY To Remove CABLES, Reverse OrderTo Replace Headlight Bulb Interlocks and RelaysThr ttle Idle Speed AdjustingI To Adjust CarburetorAcceleration Test ScrewOther TractorEngine Troubleshooting Chart ProblemCause Correction Problem Cause Correction Troubleshooting ChartFast Problem Cause CorrectionSlow OFFTractor --MODEL Number SchematicElectrical TRACTOR-- ModelnumberKEY Part Description Tractor --MODEL Number ElectricalTractor -- Model Number 917.2720601 Chassis and Enclosures KEY Part Description Tractor --MODEL Number 917.2720601 Chassis and EnclosuresTRACTOR-- Model Number Grounddrive Ground Drive Tractor -- Model Number 917.2720601 Steering Assembly KEY Part NO. NO. Description Tractor - Model Number 917.2720601 Steering AssemblyTractor -- Model Number Engine Optional EquipmentSpark Arrester KEY Part NO. no Description Tractor -- Model Number LiftassemblySeat Assembly Wheels & Tires Tractor --MODEL Number DecalsMowerdeck Mower Deck Mi= 142883 Tractor -- Model Number Hydro Gear Transaxle - Model NumberCylinder HEAD, Valve and Breather Crankcasej KEY Part NO. no 041 03-S3NITIONIELECTRICAL Blower Housing and Baffles AIR Intake Not Illustrated Starting System Engine Controls OIL PAN I Lubrication J Starting System KEY Part Description OIL PAN/LUBRICATIONCrankshaftexhaust SKit, solenoid repair SScrew, thread forming M5x0.8xlPage Suggested Guide for Sighting Slopes for Safe Operation 6am -11 pm, 7 daysaweek M 5 pm., CST, Mort.- Sat Rn.-8 p m. EST, M- F, 4 p m SSU-HOGAR sa 888-784.-6427

917.2720601 specifications

The Craftsman 917.2720601 is a standout lawn tractor that combines robust functionality with user-friendly features, making it a go-to choice for many homeowners looking to maintain their yards efficiently. With its powerful performance and innovative technologies, this model is designed to enhance the mowing experience while ensuring durability and reliability.

One of the main features of the Craftsman 917.2720601 is its engine. Powered by a reliable 19 horsepower Briggs & Stratton engine, it provides ample power to efficiently cut through thick grass and tackle various landscaping tasks. The engine is equipped with an automatic choke system, ensuring easy starts in various weather conditions.

The cutting deck plays a crucial role in the effectiveness of any lawn tractor, and the 917.2720601 does not disappoint. It features a 42-inch cutting deck, which allows for a wide cutting path, reducing the time spent mowing large areas. The deck height can be easily adjusted with a simple lever, providing six different height positions. This feature allows users to achieve the perfect cut, whether they prefer a manicured look or a more natural appearance.

One of the standout technologies integrated into this lawn tractor is the Easy Access battery and fuel system. This design enhances user convenience by allowing quick access for maintenance checks and fuel refills. Additionally, with its hydrostatic transmission, the Craftsman 917.2720601 offers smooth and reliable speed control, making it easy for users to navigate different terrains without any hassle.

Comfort is also a priority with this model. The tractor features an adjustable high back seat, designed to provide optimum support during prolonged use. Large, durable wheels ensure stability and traction on uneven ground, enhancing the overall mowing experience.

Safety features are another important aspect of this tractor. It includes a safety switch that prevents operation when the seat is unoccupied, reducing the risk of accidents. The easy-to-use controls are intuitively designed, allowing even novice users to operate the tractor with confidence.

In conclusion, the Craftsman 917.2720601 is a well-rounded lawn tractor that offers a combination of power, versatility, and comfort. With its robust engine, efficient cutting deck, user-friendly features, and safety technologies, it's an ideal choice for anyone looking to achieve a beautifully maintained lawn with ease. Whether for small or large yards, this tractor is equipped to meet a variety of mowing needs.
Top Page Image Contents