Craftsman 917.2720601 manual HOW to USE Your Tractor

Page 13

eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any

I_

adjustments

or repairs. We

recommend

standard

safety glasses

or a

he operation

of any tractor

can result

in foreign

objects

thrown

into the

 

wide vision safety mask worn over spectacles.

 

 

 

 

HOW TO USE YOUR TRACTOR

IMPORTANT:

Leaving the

ignition switch

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1, Depress clutch/brake pedal all the way down and hold.

2, Pull parking brake lever up and release pressure from clutch/brake pedal. Pedal should remain in brake

position. Make sure parking brake will hold tractor secure.

Attachment Clutch Lever

 

 

Ignition Key

 

 

aged"

Choke

 

 

Control

 

Parking Brake

Clutch/

 

/"Engaged"

 

Posi_on

"Disengaged"

=Brake"

Motion Control

Position

Position

Lever

STOPPING

MOWER BLADES -

•To stop mower blades, move attach- ment clutch lever to "DISENGAGED"

position.

GROUND DRIVE -

•To stop ground drive, depress clutch/ brake pedal all the way down.

•Move motion control lever to neutral (N)

position.

IMPORTANT: The motion control lever does not return to neutral (N) position when the clutch/brake pedal is de- pressed.

ENGINE -

•Move throttle control to slow position. NOTE: Failure to move throttle control to

slow position and allowing engine to idle before stopping may cause engine to "backfire".

•Turn ignition key to "STOP" position and remove key. Always remove key

when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

in any position other than "STOP" will

cause the battery to discharge and go dead.

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

_i, CAUTION: Always stop tractor completely, as described above, before leaving the operator's position.

TO USE THROTTLE CONTROL Always operate engine at full throttle.

•Operating engine at less than full

throttle reduces the battery charging rate.

•Full throttle offers the best bagging and mower performance.

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the motion control lever.

1.Start tractor with motion control lever in neutral (N) position.

2.Release parking brake.

3.Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever determines the cutting height.

•Grasp lift lever.

•Press plunger with thumb and move

lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to

approximately 2-1/2 inches during the cool season and to over 3 inches

during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass

over 6 inches in height should be mowed twice. Make the first cut

relatively high; the second to desired

13height.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Sears Craftsman Help Line 5 am 5 pro, Mon Sat IcraftsmaniLimited Warranty on Craftsman Riding Equipment General Operation II. Slope OperationDo not IV. ServicePage Customer Responsibilities Repair Agreement28 x 1-1/4 For Future UseBefore Removing Tractor from Skid Attach Steering Wheel To Remove Tractor from CartonLabel Terminal Install SeatRelease parking brake by depressing clutch/brake pedal To Convertto Bagging or Discharging Install Mulcher Plate Check Brake SystemCheck Tire Pressure Check Deck LevelnessAutomatic Models only Plunger Know Your TractorFreewheel Control Disengagages transmission for pushingHOW to USE Your Tractor To Operate on Hills To Adjust Gauge WheelsGaug To Operate MowerADD Gasoline Before Starting the Engine Check Engine OIL LevelTo Start Engine Purge Transmission AutomatictransmissionwarmupMulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartCh=,v-Bait Before Each USETractor BatteryBrake Operation TiresEngine Engine OIL Filter Clean AIR ScreenAIR Filter Clean AIR INTAKE/COOLING Areas CleaningMuffler Spark PlugsTractor To Install MowerTo Remove Mower PulleySIDE-TO-SIDE Adjustment To Level Mower HousingFRONT-TO-BACK Adjustment Belt InstallationWith Parking Brake To Adjust BrakeNut Jam Nut To Replace Motion Drive BeltTo Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control Lever Neutral AdjustmentTransmission REMOVAL/REPLACE- Ment Front Wheel TOE-IN/CAMBERReplacing BAI-FERY To Remove CABLES, Reverse OrderTo Replace Headlight Bulb Interlocks and RelaysThr ttle Idle Speed AdjustingI To Adjust CarburetorAcceleration Test ScrewTractor OtherEngine Problem Troubleshooting ChartCause Correction Problem Cause Correction Troubleshooting ChartFast Problem Cause CorrectionSlow OFFTractor --MODEL Number SchematicElectrical TRACTOR-- ModelnumberKEY Part Description Tractor --MODEL Number ElectricalTractor -- Model Number 917.2720601 Chassis and Enclosures KEY Part Description Tractor --MODEL Number 917.2720601 Chassis and EnclosuresTRACTOR-- Model Number Grounddrive Ground Drive Tractor -- Model Number 917.2720601 Steering Assembly KEY Part NO. NO. Description Tractor - Model Number 917.2720601 Steering AssemblyOptional Equipment Tractor -- Model Number EngineSpark Arrester KEY Part NO. no Description Tractor -- Model Number LiftassemblySeat Assembly Wheels & Tires Tractor --MODEL Number DecalsMowerdeck Mower Deck Mi= 142883 Tractor -- Model Number Hydro Gear Transaxle - Model NumberCylinder HEAD, Valve and Breather Crankcasej KEY Part NO. no 041 03-S3NITIONIELECTRICAL Blower Housing and Baffles AIR Intake Not Illustrated Starting System Engine Controls OIL PAN I Lubrication J Starting System KEY Part Description OIL PAN/LUBRICATIONCrankshaftexhaust SKit, solenoid repair SScrew, thread forming M5x0.8xlPage Suggested Guide for Sighting Slopes for Safe Operation M 5 pm., CST, Mort.- Sat Rn.-8 p m. EST, M- F, 4 p m S 6am -11 pm, 7 daysaweekSU-HOGAR sa 888-784.-6427

917.2720601 specifications

The Craftsman 917.2720601 is a standout lawn tractor that combines robust functionality with user-friendly features, making it a go-to choice for many homeowners looking to maintain their yards efficiently. With its powerful performance and innovative technologies, this model is designed to enhance the mowing experience while ensuring durability and reliability.

One of the main features of the Craftsman 917.2720601 is its engine. Powered by a reliable 19 horsepower Briggs & Stratton engine, it provides ample power to efficiently cut through thick grass and tackle various landscaping tasks. The engine is equipped with an automatic choke system, ensuring easy starts in various weather conditions.

The cutting deck plays a crucial role in the effectiveness of any lawn tractor, and the 917.2720601 does not disappoint. It features a 42-inch cutting deck, which allows for a wide cutting path, reducing the time spent mowing large areas. The deck height can be easily adjusted with a simple lever, providing six different height positions. This feature allows users to achieve the perfect cut, whether they prefer a manicured look or a more natural appearance.

One of the standout technologies integrated into this lawn tractor is the Easy Access battery and fuel system. This design enhances user convenience by allowing quick access for maintenance checks and fuel refills. Additionally, with its hydrostatic transmission, the Craftsman 917.2720601 offers smooth and reliable speed control, making it easy for users to navigate different terrains without any hassle.

Comfort is also a priority with this model. The tractor features an adjustable high back seat, designed to provide optimum support during prolonged use. Large, durable wheels ensure stability and traction on uneven ground, enhancing the overall mowing experience.

Safety features are another important aspect of this tractor. It includes a safety switch that prevents operation when the seat is unoccupied, reducing the risk of accidents. The easy-to-use controls are intuitively designed, allowing even novice users to operate the tractor with confidence.

In conclusion, the Craftsman 917.2720601 is a well-rounded lawn tractor that offers a combination of power, versatility, and comfort. With its robust engine, efficient cutting deck, user-friendly features, and safety technologies, it's an ideal choice for anyone looking to achieve a beautifully maintained lawn with ease. Whether for small or large yards, this tractor is equipped to meet a variety of mowing needs.
Top Page Image Contents