Craftsman 917.27086 manual Children, Service, Slope Operation

Page 3

Slow down beforeturning.

Never leave a running machine

unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Turn off blades when not mowing.

S.top engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or

drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or

unloading the machine into a trailer or truck.

SLOPE OPERATION

Slopes are a major factor related to loss- of-control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel

uneasy on it, do not mow it. DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the

machine. Tall grass can hide ob- stactes.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer's recommen- dations for wheel weights or counter- weights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight

down the slope.

DO NOT:

Do not turn on slopes unless neces- sary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could

suddenly turn over if a wheel is over

the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do nottry to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the

machine and the mowing activity. Never assume that children will remain where

you last saw them.

Keep children out of the mowing area and under the watchful care of another

responsible adult.

Be alert and turn machine off if children enter the area.

Before and when backing, _ook behind and down for small children.

Never carry chBdren.They may fall off and be seriously injured or interfere with safe machine operation.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

SERVICE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not- smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an

open flame, such as a water heater. Never run a machine inside a closed

area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

3

Image 3
Contents Raftxmin General Operation Service ChildrenSlope Operation Machine. Tall grass can hide obsta- cles Type Product Specifications GasolineMaintenance Agreement CapacityHex Bolt Manual Install Steering Wheel Tools Required for AssemblyUnpack Carton To Drwe Tractor OFF Skid Install SeatCheck for Proper Position of ALL Belts Check Deck LevelnessTo Convertto Bagging or Discharging Check Tire PressureH L Knowyour Tractor HOW to USE Your Tractor To Transport To Adjust Gauge WheelsTo Operate Mower To Operate on HillsBefore Starting the Enigne Check Engine OIL Level Towing Carts and OtherADD Gasoune To Start EnginePurge Transmission Mulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Babery Transaxle Cooling To Clean Batieryand TerminalsEngine BeltsAIR Filter CleaningTo Remove Mower To Install MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentFRONT-TO-BACKADJUSTMENT To Replace Motion Drive Belt To Adjust BrakeBelt Installation To Replace Mower Blade Drive BeltTo Remove Wheel for Repairs To Adjust Steering WheelAlignment Front Wheel TOE-IN/CAMBERTo Remove CABLES, Reverse Order To Start Engine with a Weak BatteryReplacing Battery To A-I-IACH Jumper CablesPreuminary SE-IING To Remove Hood and Grill AssemblyTo Adjust Choke Control To Adjust CarburetorAcceleration Test Other Fuel SystemEngine OIL CylindersCause Troubleshooting ProblemChart CorrectionCorrection Troubleshooting Chart ProblemcauseCorrection Troubleshooting Chart Problem CauseTractor - Model Number SchematicTractor - Model Number Electrical Part Description ElectricalTractor - Model Number Chassis and Enclosures 57 STD552507 KEY Part NO. NO.DESCRIPTIONTractor - Model Number Ground Drive KEY Part Description Tractor - Model Number Steeringassembly KEY Part NO. no Steering AssemblyOptional Equipment Tractor - Model Number Engine Tractor - Model Number Seat Assembly KL=Y Part KEY Description Wheels & TiresTractor - Model Number Lift Assembly Tractor - Model Number Liftassembly Tractor - Model Number MowerdeckKEY Part NO. no Mower DeckTractor - Model Number Hydro Gear Transaxle . . Model Number KEY Part 12191 61SAI IlT Gasket SET 20@Body Aasembly-Uppe 435 693494 Scow Diaph.ragmCover B65A 224775 Cover-AGuide Page Page Only Ride UP and Down Hill Not Across HillSighting IHome CentralMJ

917.27086 specifications

The Craftsman 917.27086 is a robust riding lawn mower designed for homeowners who value efficiency and power in maintaining their lawns. Known for its reliable performance, this machine combines durability with advanced features, making it a popular choice among gardening enthusiasts.

One of the standout features of the Craftsman 917.27086 is its powerful engine. Equipped with a reliable 21 horsepower Briggs & Stratton engine, this mower offers ample power to tackle even the toughest mowing tasks. The engine's reliability ensures consistent performance, allowing users to mow large areas without interruption. Its automatic transmission system allows for smooth speed adjustments, providing users with enhanced control and ease of operation.

The cutting deck of the 917.27086 is designed for optimal performance. With a 42-inch cutting width, it efficiently covers large areas in a single pass while maintaining a precise cut. The deck features a robust steel construction, ensuring durability and longevity. Additionally, the deck height can be easily adjusted, offering users the flexibility to choose the perfect cutting height for their lawns.

Maneuverability is another significant advantage of the Craftsman 917.27086. The mower's tight turning radius allows for easy navigation around obstacles, such as flower beds and trees, enabling users to achieve a clean, professional finish on their lawns. The comfortable, adjustable seat is designed for extended use, reducing fatigue during long mowing sessions.

In terms of technology, this mower incorporates a user-friendly dashboard with easy-to-read gauges and controls, providing real-time feedback on mower performance. The inclusion of LED headlights improves visibility during early morning or late evening mowing sessions, ensuring safety and productivity at all times.

Additionally, the 917.27086 supports optional attachments, such as baggers and mulchers, enhancing its versatility. This allows users to customize their mowing experience based on their lawn care needs, from collecting clippings to mulching for nutrient-rich soil.

Overall, the Craftsman 917.27086 combines power, performance, and versatility, making it an excellent investment for homeowners seeking a reliable riding mower for their lawn care needs. With its array of features and technologies, it stands out as a top contender in the market, catering to the demands of both casual users and serious gardeners alike.