Craftsman 917.27086 manual AIR Filter, Cleaning

Page 21

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

ENGINE COOUNG FINS

Remove any dust, dirt or oil from engine cooling fins to prevent engine damage from overheating. Air guide covers must be removed. Remove side panels and hood (See 'TOREMOVE HOOD AND GRILLASSEMBLY" in the Service and Adjustments section of this manual).

Clean These Areas of Dirt and Debris

AIR FILTER

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge

every 100 hours of operation or every" season, whichever occurs first.

Service air cleaner more often under dusty conditions.

Remove knobs and cover.

TO SERVICE PRE-CLEANER

Wash it in liquid detergent and water;

Squeeze it dry in a clean cloth.

Saturate it in engine oil. Wrap it in

clean, absorbent cloth and squeeze to remove excess oil.

If very dirty or damaged, replace pre- cleaner.

TO SERVICE CARTRIDGE

Clean cartridge by tapping gently on fiat surface. If very dirty or damaged, replace cartridge.

Reinstall precleaner cartridge, cover and secure with knobs.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean

the cartridge. They may cause deteriora- tion of the cartridge. Do not oil cartridge.

Do not use pressurized air to clean or dry cartridge.

Foam Pre-Cleane_idg

e

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every I00 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS"

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season, if fuel filter becomes

clogged, obstructing fuel flow to carbure- tor, replacement is required.

With engine cool, remove filter and plug fuel line sections.

Place new fuel filter in position in fuel

line with arrow pointing towards carburetor.

Be sure there are no fuel line leaks and clamps are properly positioned.

Immediately wipe up any spilled gasoline.

C':u_PFi_Clamp

CLEANING

Clean en_]ine, battery seat, finish, etc.

iof all foreign matter.

Keep finished surfaces and wheels

free of all gasoline, oil, etc.

Protect painted surfaces with automo- tive type wax.

We do not recommend using a garden hose to clean your tractor unless the electrical system, muffler, air filter and

carburetor are covered to keep water out.

Water in engine can result in a short- ened engine life.

21

Image 21
Contents Raftxmin General Operation Service ChildrenSlope Operation Machine. Tall grass can hide obsta- cles Maintenance Agreement Product Specifications GasolineCapacity TypeHex Bolt Manual Install Steering Wheel Tools Required for AssemblyUnpack Carton To Drwe Tractor OFF Skid Install SeatTo Convertto Bagging or Discharging Check Deck LevelnessCheck Tire Pressure Check for Proper Position of ALL BeltsH L Knowyour Tractor HOW to USE Your Tractor To Operate Mower To Adjust Gauge WheelsTo Operate on Hills To TransportADD Gasoune Towing Carts and OtherTo Start Engine Before Starting the Enigne Check Engine OIL LevelPurge Transmission Mulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Babery Engine To Clean Batieryand TerminalsBelts Transaxle CoolingAIR Filter CleaningTo Remove Mower To Install MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentFRONT-TO-BACKADJUSTMENT Belt Installation To Adjust BrakeTo Replace Mower Blade Drive Belt To Replace Motion Drive BeltAlignment To Adjust Steering WheelFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsReplacing Battery To Start Engine with a Weak BatteryTo A-I-IACH Jumper Cables To Remove CABLES, Reverse OrderTo Adjust Choke Control To Remove Hood and Grill AssemblyTo Adjust Carburetor Preuminary SE-IINGAcceleration Test Engine OIL Fuel SystemCylinders OtherChart Troubleshooting ProblemCorrection CauseCorrection Troubleshooting Chart ProblemcauseCorrection Troubleshooting Chart Problem CauseTractor - Model Number SchematicTractor - Model Number Electrical Part Description ElectricalTractor - Model Number Chassis and Enclosures 57 STD552507 KEY Part NO. NO.DESCRIPTIONTractor - Model Number Ground Drive KEY Part Description Tractor - Model Number Steeringassembly KEY Part NO. no Steering AssemblyOptional Equipment Tractor - Model Number Engine Tractor - Model Number Seat Assembly KL=Y Part KEY Description Wheels & TiresTractor - Model Number Lift Assembly Tractor - Model Number Liftassembly Tractor - Model Number MowerdeckKEY Part NO. no Mower DeckTractor - Model Number Hydro Gear Transaxle . . Model Number KEY Part 12191 61SAI IlT Gasket SET 20@Body Aasembly-Uppe 435 693494 Scow Diaph.ragmCover B65A 224775 Cover-AGuide Page Page Only Ride UP and Down Hill Not Across HillSighting IHome CentralMJ

917.27086 specifications

The Craftsman 917.27086 is a robust riding lawn mower designed for homeowners who value efficiency and power in maintaining their lawns. Known for its reliable performance, this machine combines durability with advanced features, making it a popular choice among gardening enthusiasts.

One of the standout features of the Craftsman 917.27086 is its powerful engine. Equipped with a reliable 21 horsepower Briggs & Stratton engine, this mower offers ample power to tackle even the toughest mowing tasks. The engine's reliability ensures consistent performance, allowing users to mow large areas without interruption. Its automatic transmission system allows for smooth speed adjustments, providing users with enhanced control and ease of operation.

The cutting deck of the 917.27086 is designed for optimal performance. With a 42-inch cutting width, it efficiently covers large areas in a single pass while maintaining a precise cut. The deck features a robust steel construction, ensuring durability and longevity. Additionally, the deck height can be easily adjusted, offering users the flexibility to choose the perfect cutting height for their lawns.

Maneuverability is another significant advantage of the Craftsman 917.27086. The mower's tight turning radius allows for easy navigation around obstacles, such as flower beds and trees, enabling users to achieve a clean, professional finish on their lawns. The comfortable, adjustable seat is designed for extended use, reducing fatigue during long mowing sessions.

In terms of technology, this mower incorporates a user-friendly dashboard with easy-to-read gauges and controls, providing real-time feedback on mower performance. The inclusion of LED headlights improves visibility during early morning or late evening mowing sessions, ensuring safety and productivity at all times.

Additionally, the 917.27086 supports optional attachments, such as baggers and mulchers, enhancing its versatility. This allows users to customize their mowing experience based on their lawn care needs, from collecting clippings to mulching for nutrient-rich soil.

Overall, the Craftsman 917.27086 combines power, performance, and versatility, making it an excellent investment for homeowners seeking a reliable riding mower for their lawn care needs. With its array of features and technologies, it stands out as a top contender in the market, catering to the demands of both casual users and serious gardeners alike.