FEIN Power Tools 9 20 26, 9 20 25, 9 20 24 manual Intended use of the vacuum cleaner, Extension cord

3 41 01 116 06 0.book Seite 4 Freitag, 17. Dezember 2010 12:42 12

4en

Before putting into operation, check the con- nection and the plug for damage.

Please also observe the operating instructions and safety warnings of the power tool being connected to the socket outlet of the vacuum cleaner.

Extension cord

WARNING If the use of an extension cord is required, its length and con-

ductor cross-section must be adequate for the applicational case, in order to prevent a volt- age drop in the extension cord, power loss and overheating of the power tool. Otherwise, the extension cord and power tool are liable to electrical danger, and the working efficiency is impaired.

Recommended dimensions of extension cords at an operating voltage of 120 V – single-phase a. c.:

Vakuumcleaner without power tool

Min. conductor size			Conductor Size in
(A.W.G.)			mm2
16	14	12	1.5	2.5	4
Cord Length in Feet			Cord Length in Meters
≤ 100	100–	200–	≤ 30	30–	60–
	200	300		60	100

Vakuumcleaner with power tool

Power con-	Min. conductor size			Conductor Size in
sumption	(A.W.G.)			mm2
10 – 13	16	14	12	1.5	2.5	4
13 – 18	14	12	–	2.5	4	–
	Cord Length in Feet			Cord Length in Meters
	≤ 100	100–	200–	≤ 30	30–	60–
		200	300		60	100

Intended use of the vacuum cleaner.

Wet/dry vacuum cleaner for vacuuming and extraction of dry, non-hazardous dusts, minor dust particles, particularly when carry- ing out dust-forming work with a power tool,

and non-combustible liquids, in weather-pro- tected environments using the application tools and accessories recommended by FEIN.