FEIN Power Tools 9 20 25 Inserting a paper-dustbag Figure, Changing the filter cartridge Figure

3 41 01 116 06 0.book Seite 8 Freitag, 17. Dezember 2010 12:42 12

8en

Inserting a paper-dust bag (Figure 4).

Use the paper-dust bag in conjunction

with the filter cartridge only for dry vac- uuming.

When inserting a paper-dust bag, take care that the cardboard flange and the paper-dust bag face completely against the inside wall of the container.

➤Open the fasteners on both sides and take off the vacuum cleaner lid.

➤Grasp the new paper-dust bag by the cardboard flange, first at the bottom then at the top, and slide it over the cog.

➤Mount the vacuum cleaner lid again and close the fasteners.

The paper-dust bag is removed in reverse order.

Changing the filter cartridge (Figure 5).

Use the filter cartridge with or without additional paper-dust bag only for dry

vacuuming!

Keep the filter cartridge dry and clean it regu- larly.

Replace the filter cartridge when the vacuum performance decreases.

➤Open the fasteners on both sides and take off the vacuum cleaner lid.

➤Screw the nut at the bottom side of the filter cartridge counterclockwise and remove the filter cartridge.

➤Mount the new filter cartridge cen- tered and screw the nut clockwise to the stop.

After removing the paper-dust bag, seal it with the closing cover in order to avoid debris.

Fig. 4

Paper- dust bag

➤Mount the vacuum cleaner lid again and close the fasteners.

Fig. 5	Nut
2.	1.
Filter cartridge