![Removing accessories (Figure 2).](/images/new-backgrounds/51128/5112811x1.webp)
3 41 01 116 06 0.book Seite 7 Freitag, 17. Dezember 2010 12:42 12
en 7
Removing accessories (Figure 2).
Upon delivery, all accessories are inside the |
| |
Fig. 2 | ||
vacuum cleaner. | ||
|
➤Open the fasteners on both sides and take off the vacuum cleaner lid.
➤Remove the accessories from inside the vacuum cleaner (the figure aside is symbolic).
| Vacuum |
| cleaner |
3. | lid |
4. Fas-
tener
2.
1.
Assembly instructions.
WARNING Before mounting or replacing accessories, pull the plug. This preventive safety measure rules out the danger of injuries through accidental starting of the vac-
uum cleaner.
Use the textile permanent filter only for dry vacuuming.
Emptying the vacuum cleaner |
| |
Fig. 3 | ||
(Figure 3). | ||
|
➤ Open the fasteners on both sides and take off the vacuum cleaner lid.
➤Remove the textile permanent filter upward and clean it, if heavily soiled or
when the vacuuming performance decreases.
➤ Empty the contents of the vacuum cleaner base into a waste or trash can.
WARNING The 5 micron textile permanent filter is only suitable for non-
hazardous dusts.
Textile permanent filter