3 41 01 116 06 0.book Seite 9 Freitag, 17. Dezember 2010 12:42 12
en 9
Mounting/dismounting the vacuum hose (Figure 6).
Turbo I, Turbo II:
➤Insert the vacuum hose to the stop in the hose connection socket until tightly seated.
➤To remove the vacuum hose, press the release button and pull the vacuum hose out.
Turbo III:
➤Insert the vacuum hose into the hose connection socket until tightly seated.
➤To remove the vacuum hose, hold hose close to the vacuum body and twist hose while pulling.
➤Mount accessories applying only slight pressure. For disassembling, turn the parts somewhat against each other and pull apart.
Fig. 6
Hose 
connection 
socket 
Vacuum hose
Working instructions.
WARNING Before mounting or replacing accessories, pull the plug. This preventive safety measure rules out the danger of injuries through accidental starting of the vac-
uum cleaner.
The motor of the vacuum cleaner is equipped with a
The vacuum cleaner starts with the last set suction capacity.
Switching on and off without a power | Fig. 7 | On/Off switch | |
tool connected (Figure 7). | |||
| |||
|
| ||
WARNING First check that the power |
|
| |
cord and power plug are not |
|
| |
damaged. |
|
|
Switching ON:
➤ Set the On/Off switch to (II).
Switching OFF:
➤Set the On/Off switch to (O).
