3 Get started
Caution
•• Use of controls, adjustments, or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the speaker.
Connect the AC power adaptor to:
•the power supply socket on the back of the speaker.
•the wall power outlet.
DC IN 5V . 1A
Built-in Battery
The speaker can also operate on
To recharge the
•Connect the speaker to the power supply.
Note
•• Use only the supplied USB cable to charge the battery.
Turn on
•Switch ON/OFF on the speaker to the ONposition.
»»The Bluetooth indicator flashes (blue).
Switch to standby mode
The speaker switches to standby mode in the following situations.
•In Bluetooth mode: no audio signal from your Bluetooth device over 15 minutes.
•In MP3 link mode: no audio signal detected over 15 minutes.
•The battery level is low.
Note
•• The Bluetooth connection will be terminated when the speaker enters standby mode, you can wake up the
speaker by hold 
for 2 seconds.
EN 5
