INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 1 : (SEE FIGURE 2)
Open parts bags labelled "A" and "B" and verify that all parts are present.
NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor.
CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation.
NOTE: Right hand (RH) and left hand (LH) are determined from the operator's position while seated on the tractor.
SHOWN FULL SiZE
PARTS BAG "B" EXCEPT WHERE NOTED
(parts bag "A")
E
JD
(parts bag "A") | (parts bag "A") |
STEP 2: (SEE FIGURE 3)
Remove tractor hood. (Refer to tractor manual.) Place hood on cardboard or on a mat to protect paint.
If you have an (LT) Lawn Tractor with a heat shield like the one shown, remove the heat shield.
iMPORTANT: Be sure to
| (parts bag | "A") | FIGURE 2 |
REF | PART NO. | QT_ | DESCRiPTiON |
A | 48894 | 2 |
B43062 2 Hex Bolt,
C43001 2 Hex Bolt,
D48866 2 Pivot Spacer
E
F43003 4 Lock Washer, 3/8"
G43070 4 Washer, 3/8"
H44742 4 Plug
(LT) LAWN TRACTOR
.........
)
N
FIGURE 3
Catt | 5 |
DO NOT RETURN TO STORE |
|