Craftsman 917.27077 manual HOW to USE Your Tractor, To SET Parking Brake, Stopping, Engine

Page 13

The operationof any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glass- es or eye shields while operating your tractor or performing any adjust- ments or repairs. We recommend a wide vision safety mask over specta- cles, or standard safety glasses.

HOW TO USE YOUR TRACTOR

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

TO SET PARKING BRAKE

•Depress clutch/brake pedal into full =BRAKE" position and hold.

•Place parking brake lever in "ENGAGED" position and release pres- sure from clutch/brake pedal. Pedal should remain in "BRAKE" position.

Make sure parking brake will hold trac- tor secure.

Choke Control Attachment Clutch Lever

"Engaged"

Position

Throttle

"Disengaged"

 

Position

 

Parking Brake

Pedal "Drive"

"Engaged"

Position

Position

"Brake" Gearshift

Adjustment Position Lever

Position Knob

STOPPING

MOWER BLADES -

•To stop mower blades, move attach- ment clutch lever to "DISENGAGED"

position.

GROUND DRIVE-

•To stop ground drive, depress clutch/brake pedal into full "BRAKE" position.

•Move gearshift lever to neutral (N) posi- tion.

ENGINE -

•Move throttle control to slow position.

NOTE: Failure to move throttle control to slow position and allowing engine to idle

before stopping may cause engine to "backfire"

•Tum ignition key to =OFF" position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

•Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than =OFF" will cause the battery to be discharged, (dead).

NOTE: Under certain conditions when

tractor is standing idle with the engine run- ning, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

,A CAUTION: Always stop tractor com- pletely, as described above, before leaving the operator's position; to empty grass catcher, etc.

THRO'R'LE CONTROL

Always operate engine at full throttle.

•Operating engine at less than full throt- tle reduces the battery charging rate.

•Full throttle offers the best bagging and

mower performance.

CHOKE CONTROL

Use choke control whenever you are start- ing a cold engine. Do not use to start a warm engine.

•To engage choke control, pull knob out. Slowly push knob in to disengage.

TO MOVE FORWARD AND BACKWARD The direction and speed of movement is controlled by the gearshift lever.

•Start tractor with clutch/brake pedal depressed and gearshift lever in neutral

(N)position.

•Move gearshift lever to desired posi- tion.

•Slowly release clutch/brake pedal to start movement.

IMPORTANT: Bring tractor to a complete

stop before shifting or changing gears. Failure to do so will shorten the useful life

of your transaxle.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RRIIFTSMIIN General Operation Limi Warraniy on Craftsman Riding EquipmentChildren ServiceSlope Operation Do notTY is Involved Nevermakeadjustmentsor repairswith the enginerunningMaintenance Agreement Product SpecificationsCustomer Responsibilities Parts BAG Contents Shown Full Size @@ , Washers Install Steering Wheel Assemble Extension Shaft and BootTools Required for To Remove Tractor from CartonInstall Seat HOW to SET UP Your Tractor Connect BatteryInstall Mulcher Plate Assemble Gauge Wheels to Mower DeckCheck for Proper Position of ALL Belts H L Attachment To SET Parking Brake HOW to USE Your TractorStopping EngineTowing Carts and Other Attachments ToadjustmowercuttingheightBefore Starting Engine To Start Engine ADD GasolineWarm Weather Starting 50 F Above Cold Weather Starting 50 F and belowMulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE Brakeoperation TractorEngine Transaxle CoolingCleaning To Remove Mower To Install MowerFRONT-TO-BACK Adjustment TolevelmowerhousingSIDE-TO-SIDE Adjustment Belt RemovalAm Nut To Adjust BrakeTo Adjust Steering Wheel Align To Start Engine with a Weak BatteryTo Adjust Throttle Control Cable Replacing BatteryTo Adjust Choke Control Preliminary Setting To Adjust CarburetorFinal SEI-IING Acceleration TestFuel System TractorEngine OIL CylindersProblem Troubleshooting ChartCause Correction Problemcause Correction Troubleshootinghart Problem Cause=FAST Tractor - Model Number SchematicElectrical Tractor - Model NumberElectrical Tractor - Model NumberTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Ground Drive KEY Part NO. no Description Tractor - Model Number Ground DriveTractor - Model Number Steering Assembly KEY Part NO. NO. Description Tractor - Model Number 917,270770 Steering AssemblyEngine 12 STD522507 Bolt RrHex 1/4 Engine KEY Part NO. NO. DescriptionKEY -PART NO. no Tractor - Model Number Seat AssemblyKEY DecalsWheels & Tires Part DESCRIP11ONTractor - Model Number Lift Assembly KEY Part Description Tractor - Model Number Mower Deck Stlt KEY Part Description150 792077A 535 Gasket SET J Tractor o Model Number Label Kiti 51A 281412 Spacer, Carburetor Inch= 25.4 mm 859 Page Page Page Suggested Guide for Sighting Slopes for Safe Operation Sears

917.27077 specifications

The Craftsman 917.27077 is a versatile and powerful garden tractor designed for homeowners who seek performance, reliability, and ease of use in their lawn care equipment. Engineered with a robust build and advanced technologies, it caters to a wide range of outdoor tasks, from mowing to hauling.

One of the standout features of the Craftsman 917.27077 is its 24-horsepower Kohler engine. This powerful engine delivers the necessary torque for efficient cutting and handling of various terrains, making it suitable for both flat lawns and hilly landscapes. The reliable engine is known for its longevity and low maintenance requirements, ensuring that homeowners can rely on it for many seasons.

Another significant aspect of the 917.27077 is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and mowing efficiency, allowing users to cover substantial ground while easily navigating through tight spaces and around obstacles. Equipped with cutting height adjustments, the deck can be set to different positions, providing flexibility for achieving the desired grass height.

The garden tractor also features a hydrostatic transmission, which offers smooth and user-friendly operation. Unlike traditional gear systems, hydrostatic transmissions allow for seamless speed and direction changes without the need to shift gears. This functionality enhances user comfort, especially during lengthy mowing sessions, making the Craftsman 917.27077 an excellent choice for homeowners.

In terms of characteristics, the Craftsman 917.27077 is designed with an ergonomic seat that ensures comfort during use. The adjustable seat can accommodate various user heights, ensuring a comfortable grip on the steering wheel for optimal control. Additionally, the tractor features a user-friendly control panel with intuitive controls for easy operation.

Another noteworthy feature is the built-in mulching capability. This technology allows for the grass clippings to be finely chopped and returned to the lawn as natural fertilizer, promoting a healthier grass ecosystem. This not only saves time but also reduces waste, making it an environmentally friendly choice.

Overall, the Craftsman 917.27077 exemplifies a well-rounded garden tractor that combines power, comfort, and innovative technology. Whether tackling routine lawn maintenance or more demanding landscape tasks, this garden tractor provides reliability and performance that homeowners can depend on. Its user-friendly features and advanced characteristics make it a valuable addition to any outdoor toolkit.
Top Page Image Contents