Craftsman 917.27077 manual HOW to SET UP Your Tractor Connect Battery, Install Seat

Page 9

HOW TO SET UP YOUR TRACTOR

CONNECT BATTERY

•Lift hood to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge bat- tery for minimum of one hour at 6-10

amps. (See "BAI-I-ERY"in

MAINTENANCE section of this manual for charging instructions).

"

.- ... .. Label

•

. .)

_

_.:.

•Assemble gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING

HEIGHT" in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the

ground. Install gauge wheel in appropri- ate hole with shoulder bolt, 3/8 washer, and 3/8-16Iocknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

Gauge Wheel Mounl_ng

Bracket

°

INSTALL SEAT

Adjust seat before tightening adjustment knob.

•Remove cardboard packing on seat pan.

•Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

•Assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

Seat Pan S_

Sh0ulder / :_,_ _/

Bolt

Knob

ASSEMBLE GAUGE WHEELS TO MOWER DECK

The gauge wheels are designed to keep the mower deck in proper position when operating mower. Be sure they are prop- erly adjusted to ensure optimum mower

performance.

3/8-16

Locknut

r Bolt

INSTALL MULCHER PLATE

•Install two latch hooks to mulcher plate

using screw, washer, lock washer, and weld nut as shown.

NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down.

•Tighten hardware securely.

•Raise and hold deflector shield in up- right position.

•Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

•Hook front latch into hole on front of mower deck.

•Hook rear latch into hole on back of mower deck.

_,CAUTION: Do not remove discharge guard from mower. Raise and hold guard when attaching mulcher plate and allow it to rest on plate while in operation.

TO CONVERT TO BAGGING OR DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: it is not necessary to change blades. The muicher blades are designed for discharging and bagging also.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RRIIFTSMIIN General Operation Limi Warraniy on Craftsman Riding EquipmentChildren ServiceSlope Operation Do notTY is Involved Nevermakeadjustmentsor repairswith the enginerunningProduct Specifications Maintenance AgreementCustomer Responsibilities Parts BAG Contents Shown Full Size @@ , Washers Install Steering Wheel Assemble Extension Shaft and BootTools Required for To Remove Tractor from CartonInstall Seat HOW to SET UP Your Tractor Connect BatteryInstall Mulcher Plate Assemble Gauge Wheels to Mower DeckCheck for Proper Position of ALL Belts H L Attachment To SET Parking Brake HOW to USE Your TractorStopping EngineToadjustmowercuttingheight Towing Carts and Other AttachmentsBefore Starting Engine To Start Engine ADD GasolineWarm Weather Starting 50 F Above Cold Weather Starting 50 F and belowMulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Brakeoperation TractorEngine Transaxle CoolingCleaning To Remove Mower To Install MowerFRONT-TO-BACK Adjustment TolevelmowerhousingSIDE-TO-SIDE Adjustment Belt RemovalAm Nut To Adjust BrakeTo Adjust Steering Wheel Align To Start Engine with a Weak BatteryReplacing Battery To Adjust Throttle Control CableTo Adjust Choke Control Preliminary Setting To Adjust CarburetorFinal SEI-IING Acceleration TestFuel System TractorEngine OIL CylindersTroubleshooting Chart ProblemCause Correction Problemcause Troubleshootinghart Problem Cause Correction=FAST Tractor - Model Number SchematicElectrical Tractor - Model NumberElectrical Tractor - Model NumberTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Ground Drive KEY Part NO. no Description Tractor - Model Number Ground DriveTractor - Model Number Steering Assembly KEY Part NO. NO. Description Tractor - Model Number 917,270770 Steering AssemblyEngine 12 STD522507 Bolt RrHex 1/4 Engine KEY Part NO. NO. DescriptionKEY -PART NO. no Tractor - Model Number Seat AssemblyKEY DecalsWheels & Tires Part DESCRIP11ONTractor - Model Number Lift Assembly KEY Part Description Tractor - Model Number Mower Deck Stlt KEY Part Description150 792077A 535 Gasket SET J Tractor o Model Number Label Kiti 51A 281412 Spacer, Carburetor Inch= 25.4 mm 859 Page Page Page Suggested Guide for Sighting Slopes for Safe Operation Sears

917.27077 specifications

The Craftsman 917.27077 is a versatile and powerful garden tractor designed for homeowners who seek performance, reliability, and ease of use in their lawn care equipment. Engineered with a robust build and advanced technologies, it caters to a wide range of outdoor tasks, from mowing to hauling.

One of the standout features of the Craftsman 917.27077 is its 24-horsepower Kohler engine. This powerful engine delivers the necessary torque for efficient cutting and handling of various terrains, making it suitable for both flat lawns and hilly landscapes. The reliable engine is known for its longevity and low maintenance requirements, ensuring that homeowners can rely on it for many seasons.

Another significant aspect of the 917.27077 is its 42-inch cutting deck. This size strikes a perfect balance between maneuverability and mowing efficiency, allowing users to cover substantial ground while easily navigating through tight spaces and around obstacles. Equipped with cutting height adjustments, the deck can be set to different positions, providing flexibility for achieving the desired grass height.

The garden tractor also features a hydrostatic transmission, which offers smooth and user-friendly operation. Unlike traditional gear systems, hydrostatic transmissions allow for seamless speed and direction changes without the need to shift gears. This functionality enhances user comfort, especially during lengthy mowing sessions, making the Craftsman 917.27077 an excellent choice for homeowners.

In terms of characteristics, the Craftsman 917.27077 is designed with an ergonomic seat that ensures comfort during use. The adjustable seat can accommodate various user heights, ensuring a comfortable grip on the steering wheel for optimal control. Additionally, the tractor features a user-friendly control panel with intuitive controls for easy operation.

Another noteworthy feature is the built-in mulching capability. This technology allows for the grass clippings to be finely chopped and returned to the lawn as natural fertilizer, promoting a healthier grass ecosystem. This not only saves time but also reduces waste, making it an environmentally friendly choice.

Overall, the Craftsman 917.27077 exemplifies a well-rounded garden tractor that combines power, comfort, and innovative technology. Whether tackling routine lawn maintenance or more demanding landscape tasks, this garden tractor provides reliability and performance that homeowners can depend on. Its user-friendly features and advanced characteristics make it a valuable addition to any outdoor toolkit.
Top Page Image Contents