ASSEMBLY
INSTALL MULCHER PLATE (See Figs, 5 and 6)
,Install two latch hooks to mulcher plate using screw, washer, lock washer, and weld nut as shown.
NOTE:
•Tighten hardware securely
•Raise and hold detteclor shield in upright position.
,,Place front of mulcher plate over front of mower deck opening and slide into place, as shown.
•Hook front latch into hole on front of mower deck.
,,Hook rear latch into hole on back of mower deck
guard from mower, Raise and hold
CAUTION: De not remove discharge guard when attaching mutcher plate
and allow it to rest on plate while In
operation,
,w | lull i,ll iii |
TO CONVERT TO BAGGING OR
DISCHARGING
Sfmpiy remove mulcher ptate and store in a safe place, Your mower is now ready for discharging or installationof optionat grass catcher accessory,
NOTE: It is not necessary to change blades The muleher blades are designed for discharging and bagging also,
HOOK
LOCKWELD
WASHER NUT
WASHER
WASHER
MULCHER_'_""--SCREW
PLATE
FiG. 5
DEFLECTOR
EHrELD
LATCH
HOOKS
FIGo 6
,/CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEfVE
THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUA LtTY PRODUCT
PLEASE REVIEW THE FOLLOWING CHECKLIST:
•/ Aft assembly Inslructions have been completed
,/ No remaining _oosa parts in carton.
,," Battery is properly prepared and charged. (Minimum 1 hour at 6 amps)
,/ Seat is adiusled comfortably and tightened securely.
,." AII tires are property inflated. (For shipping purposes, the tires were overfnflaled at the factory),
,/ Be sure mower deck is properly leveled
/Check mower and dflve belts. Be sure they are routed properly around pulleys and inside all belt keepers.
,/ Check wiring, See that alfconnectfons are still secure and wiles are property clamped.
_" Before driving tractor, be sure freewheel control is in drNe position
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA A TTENTfON TO THE FOLLOWING IMPORTANT
ITEMS:
,/ Engine oil is at proper level..
,/ Fuel tank is filled with fresh, clean, regular unleaded gasoline.
v" Become familiar with afl controls - their location and function. Operate them before you start the engine
,I Be sure brake system is in sate operating cond{tton.
,f" It is importanl topurge the transmission before operat- ing your tractor for lSe first time Foltow proper slaritng
and transmission purging instructions (Sea'TO START ENGINE" and 'PURGE TRANSMISSION" {n the Op- eralton section of this manual).
10