Craftsman 917.258911 owner manual To Adjust Gauge Wheels See Fig, 8A, To Operate Mower See Figs

Page 14

UlL

II Illl

ii i i

i i lllll

illlllllljlliJll

TO ADJUST GAUGE WHEELS (See Fig, 8A)

Gauge wheels are properly adjusted when theyare stightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions°

•Be sure tractor is on a flat level surface..

•Lower mower and adjust mower to desired cutting height.

°Remove retainer spring and clevis pin which secure each gauge wheel bar°

•Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and insert clevis pin. Gauge wheels should be slightly off the ground..

°Replace retainer spring into clevis pin.

IMPORTANT: BE SURE TO READJUST GAUGE WHEELS IF YOU CHANGE TH ECUTTING HEIGHT OFTHE MOWER DECK.

RETAINER

SPRING

CLEVIS PIN

TO OPERATE MOWER (See Figs. 6 and 7)

Your tractor is equipped with an operator presence sens- ing switch.. Any attempt by the operator to leave the seat with the engine runningand the attachment clutch engaged wilt shut off the engine.

•Select desired height of cut.

°Lower'mower with attachment lift control

•Start mower blades by engaging attachment clutch control.

°TO STOP MOWER BLADES- disengage attachment clutch control.

...............iiiil, l,i ill

without either the entire grass catcher,

on mowers so equipped, or the dis- CAUTION: Do not operate the mower charge guard in place.

.....................i ± ii JlL"

R,R.

RUNNER

DISCHARGE

GUARD

N

TO OPERATE ON HILLS

 

!

 

!

I

CAUTION: Do not drive up or down

I

hills with slopes greater than 15° and

I

do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

,Avoid stopping or changing speed on hills.

°If slowing is necessary, move throttle control lever to slower position.

,If stopping is absolutely necessary, push clutch/brake

pedal quickly to brake position and engage parking brake.

,Move motion contro_ lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES

NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

°To restart movement, slowly release parking brake and clutch/brake pedal.

=Slowfy move motion control lever to slowest setting.

• Make all turns slowly.

TO TRANSPORT (See Figs. 6 and 9)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel controlis located at the rear drawbar of tracton

•Raise attachment lift to highest position with attach- ment lift control.

°Remove retainer spring from freewheel control rod.

°Push control rod in to disengage transmission and reinsert retainer spring into control rod hole now on back side of the bracket.

oDo not push or'tow tractor at more than two (2) MPH.

• To reengagetransmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on atruckor atrailer, be sure hood is closed and secured to tracton Use an appropriate means of tying hood to tractor (rope, cord, etc.)o

FIG. 9

FIG. 8B

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For Consumer Assistance HOT LINE, Call this Toll Free Numbei III. Children Safe Operation Practices for Ride-On MowersIL Slope Operation Customer Responsibilities Maintenance AgreementLimited 90 DAY Warranty on Battery ModelAssembly Product SpecificationsTractor Accessories Parts ORDERING/SERVICE Back CoverEngine Maintenance PerformanceHardware Pack Parts Bag contents shownParts bag contents not shown full siz e To Remove Tractor from Carton Tools Required for AssemblyHOW to SET UP Your Tractor Before Rolling Tractor OffskidCheck Tire Pressure Install Seat See FigWHEEL/I Check Brake SystemSee Figs Install Mower and Drive BeltMbly Check Mower LevelnessChecklist BLYBattery Reverse Forward Fast Slow LockOperati Know Your TractorTo SET Parking Brake See Fig HOW to USE Your TractorTo Adjust Mower Cutting Height See Fig Stopping See FigTo Operate on Hills To Adjust Gauge Wheels See Fig, 8ATo Operate Mower See Figs To Transport See FigsHydrostatic Transmission Warm UP Before Starting the EngineADD Gasoline Ning Mowing TipsPurge Transmission Before Operating the TractorGeneral Recommendations Maintenance ScheduleLubrication Chart Before Each USEBrake Operation BatteryTractor TiresTransaxle Pump Fluid BeltsLubrication Customer RES Ponsibilities CleaningClean AIR INTAKE/COOLING Areas Engine OIL FilterTo Remove Mower See Fig To Level Mower HousingTo Install Mower Important if AN Attachment Other thanPosition Service and Adjust EntsTo Replace Mower Drive Belt Mower Drive Belt Removal See FigSee Fig To Adjust Attachment ClutchTo Adjust Brake See Fig To Replace Mower Blade Drive BeltTransmission REMOVAL/REPLACEMENT Service and AdjuTo Adjust Motion Control Lever See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Rvice and AdjustmentsFront Wheel TOE-IN Adjustment To Remove Wheel for RepairsTo Replace Headlight Bulb Service and ADJEngine Interlocks and RelaysFinal Setting To Adjust Choke Control See FigsTo Adjust Carburetor See Fig AdjustmentsEngine OIL StorageFuel System Problem Cause Correction Troubleshooti PointsPoints Problem CauseTroubleshooti Engine Connector Tractor Tractor - Model NumberTractor - Model Number ElectricalRepair Parts KEY Part DescriptionChassis and Enclosures 47120 1815 64 17Unc x O0L NUMe 9772S89!1 KEY Part Ground DriveBearing, Idler NO. NO. DescriptionSteering Assembly Steering Assembly Engine 37 tEngine See Breakdown Seat Assembly 715 Wheels & TiresDecals KEY Part3834 Lift Assembly2O 19 Indicator Mower Deck NO. no 7398Q500Repair Parts Description Tractor - Model Number Hydro Gear Transaxle - Model NumberKEY Part NO. no Descripon 122699X Hydro Gear Pump Model Number BU-10L-122KEY Part Description NO. no 122767XKohler Engine Model Number CV22S, Type Number T1!ljKEY Part NO. no Kohler ENGINE- Model Number CV22S, Type NumberCylinder HEAD/VALVE/BREATHER Crankcase KEY Part OwE,,Ous,,,o. BF i....................., s 20 19 18 17Not Illustrated TRACTOR- Model NumberNot Illustrated AIR IntakeSARTINGs,! ...........EM 19 1815 ,oFilter,Oil Starting System Engine Controls KEY Part NO. no DescriponOIL PAN/LUBRICATION KEY Part Description Tractor -- Model Number Notillustrated KEY Part NO. no Description Not Illustrated CrankshaftExhaust KEY Part NO. no Description 24-75503 GasketSetLI.I Owners AL If YOU Need Repair Service or PartsFor Repair SERVICE, Call this Toll Free Number MODEl, Number ,,917,258911

917.258911 specifications

The Craftsman 917.258911 is a formidable lawn tractor designed to provide exceptional performance and versatility for homeowners and landscape enthusiasts. This model stands out due to its combination of power, efficiency, and comfort, making it an ideal choice for maintaining larger lawns and complex landscapes.

One of the key features of the Craftsman 917.258911 is its powerful engine. Equipped with a robust 24 HP Briggs & Stratton engine, it delivers reliable power that enables the tractor to tackle tough mowing jobs with ease. The engine is designed with overhead valve technology, which enhances fuel efficiency and improves overall performance. It starts quickly and is engineered for durability, ensuring that users can depend on it season after season.

The cutting deck on the Craftsman 917.258911 is another highlight, featuring a generous 54-inch design that allows for wide, efficient mowing in fewer passes. The deck is fabricated from a durable welded steel, providing strength and longevity while helping to deliver clean cuts. The deck also features a deck washout port, enabling easy cleaning to maintain optimal performance and longevity.

This lawn tractor offers a six-position height adjustment lever, allowing users to customize grass cutting heights according to their preferences or grass type. This level of adjustability ensures that the mower can tackle various mowing conditions effectively.

For added comfort, the Craftsman 917.258911 is designed with a spacious, high-back seat that provides support during extended mowing sessions. The seat is adjustable, accommodating various operator heights and ensuring an ergonomic driving experience. The inclusion of oversized, smooth-rolling tires enhances maneuverability and stability, making it easier to navigate uneven terrain.

Technology plays a role in the Craftsman 917.258911, as it is equipped with a hydrostatic transmission that offers seamless speed adjustments without the need for shifting gears. This feature enhances the ease of operation, allowing users to focus on their mowing tasks without distractions.

Other notable characteristics include its rugged construction, easy steering, and front-mounted headlights for improved visibility during early morning or late evening mowing sessions. Overall, the Craftsman 917.258911 combines power, comfort, and advanced technology, making it an excellent investment for anyone looking to maintain a beautiful lawn with efficiency and ease.
Top Page Image Contents