Craftsman 917272673 owner manual Before Starting the Engine, To Operate on Hills, To Transport

Page 14

The average lawn should be cut to ap- proximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt

by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES -

disengage attachment clutch control.

_b,CAUTION: Do not operate the mower

without either the entire grass catcher, on mowers so equipped, or the deflector

shield in place.

 

 

Lift

 

Lever

High Position

Attachmenl

zl-

 

Clutch Lever

 

 

"En

:_"--

Low

 

 

Position

Position

_.

"Disengaged"

Shield

TO OPERATE ON HILLS

,_kWARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide at the back of this manual.

Choose the slowest speed before start- ing up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

TO TRANSPORT

Raise attachment lift to highest position with attachment lift control.

When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

Do not push or tow tractor at more than

five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, re- move and read oil level. If necessary, add oil until "FULL" mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual)•

To change engine oil, see the Mainte- nance section in this manual.

14

Image 14
Contents ICRAFT, MnN ,I Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryWash hands after handling II. Slope OperationIII. Children IV. ServiceDo not Product Specifications 1stRepair Protection Agreements Sears Installation ServiceIstomer Responsibilities Video Cassette SeatKeys To Remove Tractor from Tools Required for AssemblyInstall Seat Before Removing Tractor from Skid Attach Steering WheelCheck Battery Lift seat pan to raised positionCheck for Proper Position of ALL Belts Install Mulcher PlateTo Convert to Bagging or Discharging Check BrakesystemResult in death, serious injury and/or property damage Know Your Tractor PlungerEngine HOW to USE Your TractorStopping To USE Throttle ControlTo Transport Before Starting the EngineTo Operate on Hills Towing Carts and Other ATTACH- MentsTo Start Engine Mowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations PivotsOperator Presence System BatteryBrake Operation Blade CareEngine Lubrication Transaxle CoolingBelts AIR FilterSpark Plugs CleaningMuffler IN-LINE Fuel FilterTo Remove Mower To Install MowerTractor To Replace Mower Blade Drive Belt To Level Mower HousingSIDE-TO-SIDE Adjustment Belt RemovalTo Replace Motion Drive Belt Front Wheel TOE-IN/CAMBER Transaxle Gear Shift Lever NEU- Tral AdjustmentTo Adjust Steering Wheel ALIGN- Ment To Start Engine with a Weak BATTo Replace Headlight Bulb Replacing BatteryDo not short battery To Remove Hood and Grill AS- SemblyPreliminary Setting To Adjustthrottle Control CableTo Adjust Carburetor Final SettingFuel System BatteryTractor Engine OILCause ProblemWeak or dead battery CorrectionFaulty operator-safety presence control system Troubleshooting ChartLoss of power Excessive vibration Poor cut unevenProblemcause Tractor -- Model Number Schematic WhiteTractor - Model Electrical175688 Electrical74760412 Bolt Hex Hd 1/4-20 Unc x 3/4 Tractor - Model Number 917.272673 Chassis and Enclosures Chassis-Laser-It.stlt27Chassis and Enclosures Hood/DashTractor - Model Number Ground Drive 197Tractor - Model Number Ground Drive Tractor - Model Number 30 STD561210 40 7810H 41 100711L 1397686266H Insert, Steering WheelArrester Tractor -- Model Number8113 Tractor - Model Number 917.272673 Seat Assembly 16-18 Unc 17000616 Screw 16 x 1-1/2 STD541431 Nut 19131614Tractor - Model Number Decals Wheels &TIRESLink, Lift, L.H Tractor - Model Number Lift Assembly122365X Button, Plunger, Red 142 Tractor -- Model Number Mower Deck156 151 Deflector Mower Deck139888 Unc x883 706A Bearing 5/8 792073A 790079780086A 778309227 524 842€ 12662o,0 634 1266A O 93I1266 95e 1005 3101Briggs ENGINE-MODEL Number 31C707, Type Number 0230-E1 Tractor Model Number917.272673 Briggs ENGINE-MODEL Number 31C707,TYPE Number 0230-E1Page Suggested Guide for Sighting Slopes for Safe Operation SE/ARS

917272673 specifications

The Craftsman 917272673 is a powerful and versatile lawn tractor designed for homeowners seeking a reliable solution for lawn maintenance. This robust machine combines functionality with innovative technology, making it an essential addition to any garden or yard.

One of the standout features of the Craftsman 917272673 is its potent engine. Powered by a reliable 24 HP V-Twin Kohler engine, it delivers the necessary torque and power to handle various cutting conditions. This engine ensures efficient performance, whether you're tackling tall grass or dealing with uneven terrain. The hydrostatic transmission also enhances ease of use, allowing for smooth acceleration and seamless transitions between speeds without the need for manual gear shifts.

The design of the Craftsman 917272673 promotes user comfort and support. The adjustable high-back seat provides ample support during lengthy mowing sessions, ensuring that users remain comfortable while navigating their lawns. Additionally, the ergonomic steering wheel and easy-access controls simplify the driving experience, allowing for precise maneuverability around obstacles like flower beds and trees.

The cutting deck is another remarkable feature of this lawn tractor. With a 46-inch cutting width, users can cover significant ground efficiently. The deck’s dual-blade system not only enhances cutting performance but also provides a clean and even cut. The cutting height can be easily adjusted through six different positions, allowing for personalized lawn care that caters to various grass types and growth heights.

Furthermore, the Craftsman 917272673 includes technological advancements such as a reinforced steel frame, making it durable enough to withstand regular use and the wear and tear of outdoor conditions. The tractor is also equipped with a built-in mulching capability, enabling users to finely chop grass clippings and return them to the soil, promoting healthy grass growth while minimizing waste.

Maintenance is simplified with features like an easy-access oil filter and engine access, which makes routine checks and servicing hassle-free. This commitment to user-friendly maintenance ensures that the Craftsman 917272673 remains in peak condition for many mowing seasons.

With its combination of power, comfort, and advanced technologies, the Craftsman 917272673 is a top choice for homeowners looking for an effective lawn care solution that blends performance with convenience. Whether you own a small yard or a larger landscape, this lawn tractor is poised to meet diverse mowing needs efficiently.