Craftsman 917272673 owner manual Check Battery, Lift seat pan to raised position

Page 9

5.Pivot seat and pan forward and as- semble adjustment knob and flat washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pa_

Shoulder

 

Bolts

Adjustment Knob

CHECK BATTERY

1.Lift seat pan to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge - battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instruc- tions).

Label

Terminal

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLLTRACTOR OFF SKID (See Operation section for location and function of controls)

1.Press lift lever plunger and raise attachment lift lever to its highest po- sition.

2.Release parking brake by depressing clutch/brake pedal.

3.Place gearshift lever in neutral (N) position.

4.Roll tractor forward off skid,

5.Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

_iLWARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other

people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

8.Slowly release clutch/brake pedal and slowly drive tractor off skid.

9.Apply brake to stop tractor, set park- ing brake and place gearshift lever in neutral position.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

9

Image 9
Contents ICRAFT, MnN ,I Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation Wash hands after handlingIV. Service Do notIII. Children 1st Product SpecificationsSears Installation Service Istomer ResponsibilitiesRepair Protection Agreements Seat KeysVideo Cassette Install Seat Tools Required for AssemblyTo Remove Tractor from Before Removing Tractor from Skid Attach Steering WheelLift seat pan to raised position Check BatteryTo Convert to Bagging or Discharging Install Mulcher PlateCheck for Proper Position of ALL Belts Check BrakesystemResult in death, serious injury and/or property damage Plunger Know Your TractorStopping HOW to USE Your TractorEngine To USE Throttle ControlTo Operate on Hills Before Starting the EngineTo Transport Towing Carts and Other ATTACH- MentsTo Start Engine Mulching Mowing Tips Mowing TipsGeneral Recommendations Lubrication ChartBefore Each USE PivotsBrake Operation BatteryOperator Presence System Blade CareBelts Transaxle CoolingEngine Lubrication AIR FilterMuffler CleaningSpark Plugs IN-LINE Fuel FilterTo Install Mower TractorTo Remove Mower SIDE-TO-SIDE Adjustment To Level Mower HousingTo Replace Mower Blade Drive Belt Belt RemovalTo Replace Motion Drive Belt To Adjust Steering Wheel ALIGN- Ment Transaxle Gear Shift Lever NEU- Tral AdjustmentFront Wheel TOE-IN/CAMBER To Start Engine with a Weak BATDo not short battery Replacing BatteryTo Replace Headlight Bulb To Remove Hood and Grill AS- SemblyTo Adjust Carburetor To Adjustthrottle Control CablePreliminary Setting Final SettingTractor BatteryFuel System Engine OILWeak or dead battery ProblemCause CorrectionLoss of power Excessive vibration Troubleshooting ChartFaulty operator-safety presence control system Poor cut unevenProblemcause White Tractor -- Model Number SchematicElectrical Tractor - ModelElectrical 74760412 Bolt Hex Hd 1/4-20 Unc x 3/4175688 Chassis-Laser-It.stlt27 Tractor - Model Number 917.272673 Chassis and EnclosuresHood/Dash Chassis and Enclosures197 Tractor - Model Number Ground DriveTractor - Model Number Ground Drive Tractor - Model Number 6266H 13976830 STD561210 40 7810H 41 100711L Insert, Steering WheelTractor -- Model Number 8113Arrester 16-18 Unc 17000616 Screw 16 x 1-1/2 STD541431 Nut 19131614 Tractor - Model Number 917.272673 Seat AssemblyWheels &TIRES Tractor - Model Number DecalsTractor - Model Number Lift Assembly 122365X Button, Plunger, RedLink, Lift, L.H Tractor -- Model Number Mower Deck 156 151142 139888 Mower DeckDeflector Unc x883 706A 780086A 790079Bearing 5/8 792073A 778309524 842€ 1266 2272o,0 93I 1266 95e634 1266A O 3101 1005Tractor Model Number 917.272673Briggs ENGINE-MODEL Number 31C707, Type Number 0230-E1 Number 0230-E1 Briggs ENGINE-MODEL Number 31C707,TYPEPage Suggested Guide for Sighting Slopes for Safe Operation SE/ARS

917272673 specifications

The Craftsman 917272673 is a powerful and versatile lawn tractor designed for homeowners seeking a reliable solution for lawn maintenance. This robust machine combines functionality with innovative technology, making it an essential addition to any garden or yard.

One of the standout features of the Craftsman 917272673 is its potent engine. Powered by a reliable 24 HP V-Twin Kohler engine, it delivers the necessary torque and power to handle various cutting conditions. This engine ensures efficient performance, whether you're tackling tall grass or dealing with uneven terrain. The hydrostatic transmission also enhances ease of use, allowing for smooth acceleration and seamless transitions between speeds without the need for manual gear shifts.

The design of the Craftsman 917272673 promotes user comfort and support. The adjustable high-back seat provides ample support during lengthy mowing sessions, ensuring that users remain comfortable while navigating their lawns. Additionally, the ergonomic steering wheel and easy-access controls simplify the driving experience, allowing for precise maneuverability around obstacles like flower beds and trees.

The cutting deck is another remarkable feature of this lawn tractor. With a 46-inch cutting width, users can cover significant ground efficiently. The deck’s dual-blade system not only enhances cutting performance but also provides a clean and even cut. The cutting height can be easily adjusted through six different positions, allowing for personalized lawn care that caters to various grass types and growth heights.

Furthermore, the Craftsman 917272673 includes technological advancements such as a reinforced steel frame, making it durable enough to withstand regular use and the wear and tear of outdoor conditions. The tractor is also equipped with a built-in mulching capability, enabling users to finely chop grass clippings and return them to the soil, promoting healthy grass growth while minimizing waste.

Maintenance is simplified with features like an easy-access oil filter and engine access, which makes routine checks and servicing hassle-free. This commitment to user-friendly maintenance ensures that the Craftsman 917272673 remains in peak condition for many mowing seasons.

With its combination of power, comfort, and advanced technologies, the Craftsman 917272673 is a top choice for homeowners looking for an effective lawn care solution that blends performance with convenience. Whether you own a small yard or a larger landscape, this lawn tractor is poised to meet diverse mowing needs efficiently.