To Replace Mower Blade Drive Belt

7.Pushclutch cable housingguide into bracket,slide collar onto guide and secure with large retainerspring.

8.Placeflat washerand clutch spring on idlerpulley bolt and secure with small retainerspring.

9.Install belt onto engine pulley.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure

tires are properly inflated (See "PROD- UCT SPECIFICATIONS" section of this

manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance "A" on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjust- ment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

Bottom	edge		Bottom	edge of
of mower to __
ground	k_.	_	_A	gr°und
ground	k_.	_
	A_ - _	-V (3round Line

Before making any necessary adjust- ments, check that both front links are equal in length.

If links are not equal in length, adjust

one link to same length as other link. To lower front of mower loosen nut "E"

on both front links an equal number of turns.

When distance "D" is 1/8" to 1/2"

lower at front than rear, tighten nuts "F"

against trunnion on both front links, To raise front of mower, loosen nut "F"

from trunnion on both front links. Tighten nut "E" on both front links an equal num- ber of turns. The two front links must

remain equal in length.

When distance "D" is 1/8" to 1/2" lower

at front than rear, tighten nut "F" against trunnion on both front links.

Recheck side-to-side adjustment.

,_.

o _; ' --_

Mandrel

, ,

Both Front Links Should be Equal in Length

Suspension Arm

Lift Link

Adjustment Nut

FRONT-TO-BACK ADJUSTMENT IMPORTANT: Deck must be level side-to side. If the following front-to-back adjust- ment is necessary, be sure to adjust both front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower housing should be adjusted so

that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in

its highest position.

Check adjustment on right side of trac- tor. Measure distance "D" directly in front and behind the mandrel at bottom edge of mower housing as shown.

Front Links

The mower blade drive belt may be re- placed without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

1.Remove mower from tractor (See "TO REMOVE MOWER" in this section of

manual).

2.Work belt off both mandrel pulleys and idler pulleys.

3.Pull belt away from mower.

917272673 specifications

The Craftsman 917272673 is a powerful and versatile lawn tractor designed for homeowners seeking a reliable solution for lawn maintenance. This robust machine combines functionality with innovative technology, making it an essential addition to any garden or yard.

One of the standout features of the Craftsman 917272673 is its potent engine. Powered by a reliable 24 HP V-Twin Kohler engine, it delivers the necessary torque and power to handle various cutting conditions. This engine ensures efficient performance, whether you're tackling tall grass or dealing with uneven terrain. The hydrostatic transmission also enhances ease of use, allowing for smooth acceleration and seamless transitions between speeds without the need for manual gear shifts.

The design of the Craftsman 917272673 promotes user comfort and support. The adjustable high-back seat provides ample support during lengthy mowing sessions, ensuring that users remain comfortable while navigating their lawns. Additionally, the ergonomic steering wheel and easy-access controls simplify the driving experience, allowing for precise maneuverability around obstacles like flower beds and trees.

The cutting deck is another remarkable feature of this lawn tractor. With a 46-inch cutting width, users can cover significant ground efficiently. The deck’s dual-blade system not only enhances cutting performance but also provides a clean and even cut. The cutting height can be easily adjusted through six different positions, allowing for personalized lawn care that caters to various grass types and growth heights.

Furthermore, the Craftsman 917272673 includes technological advancements such as a reinforced steel frame, making it durable enough to withstand regular use and the wear and tear of outdoor conditions. The tractor is also equipped with a built-in mulching capability, enabling users to finely chop grass clippings and return them to the soil, promoting healthy grass growth while minimizing waste.

Maintenance is simplified with features like an easy-access oil filter and engine access, which makes routine checks and servicing hassle-free. This commitment to user-friendly maintenance ensures that the Craftsman 917272673 remains in peak condition for many mowing seasons.

With its combination of power, comfort, and advanced technologies, the Craftsman 917272673 is a top choice for homeowners looking for an effective lawn care solution that blends performance with convenience. Whether you own a small yard or a larger landscape, this lawn tractor is poised to meet diverse mowing needs efficiently.