Craftsman 247.796890 Installation of Hopper and Upper GUItDE, Extension, Self-Tapping Screw C

No

INSTALLATION OF HOPPER AND UPPER GUItDE

Self-Tapping Screws (C)

FIGURE 3.

EXTENSION

1.The lower leaf ramp section on the chipper-shred- der is placed in an upright position for shipping purposes Lower this section,

2, Place the hopper in position on the shredder

Lower Leaf -- m See figure 3. Start all four hex washer head self-

Ramp Sectiontapping screws/C),'then tighten securely using a 1/2" socket wrench

Lowe r

Leaf

RampKeeper(D)

Section

3	Assembte		the	keepers	(D)	to	the sides	of the	unit
•--------	with	two	hex	washer	head	self-tapping		screws	(C),
	using	a	t/2"	socket	wrench,		T_ghten	securely

\_ Self-Tapping Screw (C)

FIGURE 4.

Lower Leaf __

Ramp Section _ \

4 Place upper leaf ramp section inside the lower fear ramp section Secure with four hex bolts (A) and hex lock nuts (B). Tighten securely See figure 5

Ramp Section

FIGURE 5.