•Set the cart right side up on its wheels and place a corner cap over each front corner of the cart as shown in figure 13.
CORNER CAPS
AssembLe front panel over the ends of the side panels and on top of the cart bed flange and the comer caps. Leaving the top holes in the front pane{ empty, fasten it to the cart body and the side panels using six 1/4" x 3/4" hex bolts, six 1/4" flat washers, six 1/4" lock washers and six 1/4" hex nuts. See figure 15.
| 1/4" FLAT |
|
1/4" LOCK | WASHER | 1/4" x 3/4" |
WASHER |
| HEX BOLT |
FIGURE 13
FRONT
PANEL
Positionthe right side panel on top of the cart bed flange and the front comer cap. Align holes in side panel with holes in corner cap and holes in top of cart bed flange. Fasten together using two 1/4" x 3/4" hex botts, two 1/4" flat washers, two 1/4" lock washers and two 1/4" hex nuts. Repeat on other side. See figure 14.
RIGHT SIDE LEFT SIDE PANEL
PANEL1
1/4" LOCK WASHER
1/4" HEX NUT
FIGURE 14
FIGURE 15
•Assemble the cross brace to the two top holes at the rear of each side panel using four 1/4" x 3/4" hex bolts, four 1/4" lock washers and four 1/4" hex nuts. See figure 16.
CROSS | 1/4" x 3/4" |
BRACE | HEX BOLT |
1/4" HE)( NUT | I |
FIGURE 16
10