Craftsman 247.775870 owner manual Content, Plug

Page 2

Content

Page

Content

Page

Warranty Information

2

Service & Adjustment

14

Safe Operation Practices

3

Off-Season Storage

16

Assembly

5

Trouble-Shooting

17

Operation

8

Repair Parts

18

Maintenance

11

 

 

One-Year Warranty on Craftsman Chipper-Shredder

For one year from the date of purchase, when this Craftsman chipper-shredder is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the operator'smanual, Sears will repair, free of charge, any defect in material or workmanship.

This warranty excludes the blades, chipper blades, flails, air cleaners, spark plugs, catcher bags and tires which are expendable parts and become worn during normal use.

If this chipper-shredderis used for commercial or rental purposes, this warranty applies for only 30 days from the date of purchase.

WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER IN THE

UNITED STATES. THIS WARRANTY APPLIES ONLY WHILE THIS PRODUCT IS IN USE IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D/817WA, Hoffman Estates, II 60179

These accessories were available when the chipper- shredder was purchased. They are also available at most Sears retailoutlets and service centers. Most Sears stores can order repair parts for you when you provide the model number of your chipper-shredder.

Spark

Air

Engine

Gas

Stabilizer

Tow Hitch Kit

Plug

Filter

Oil

Can

 

 

PRODUCT

SPECIFICATION

HORSEPOWER:

6.5 H.P.

CRANKCASE CAPACITY:

21oz. SAE 30 ENGINE OIL

FUEL TANK CAPACITY:

3 QUARTS (UNLEADED)

 

SPARK PLUG:

Champion (N4C)

 

SPARK PLUG GAP:

.030

Model Number ............. 247.775870 ...........

Serial Number ...........................................................

Date of Purchase ......................................................

Record both serial number and date of purchase and keep in a safe place for future reference.

2

Image 2
Contents Crrftsman Content PlugGeneral Operation Your Responsibility ServiceChildren From Carton Disconnecting Spark PlugRemove CHIPPER-SHREDDER Loose PartsDischarge Chute Attaching Hopper AssemblyAttaching Discharge Chute To the stop washer on the inlet guide. See figure Attaching the Chipper ChuteAttaching the Catcher BAG WasherStopping Engine Meets Ansi Safety StandardsOperating Controls Primer ButtonGAS and OIL FILL-UP Place the throttle control lever in Fast position UP Using Your CHIPPER-SHREDDERStarting Engine General Recommendations To Lower the Hopper AssemblyCleaning Customer Responsibilities Engine MaintenanceBase Paper Filter Pre-Cleaner Lubrication MufflerSharpening or Replacing the Blades Cleaning the Flail ScreenPul!the flail screen from inside the housing. See SlotAdjusting Carburetor Engine SpeedOther CHIPPER-SHREDDEREngine Dirty air cleaner Fill tank with clean, fresh fuelSears Craftsman 6.5 H.P. CHIPPER-SHREDDER Model 21 747-0531A 681-0111 681-0144712-0429 712-3027 34 714-0149B305 287 Key No. Part No 137120A Carburetor 28//27590696 590601 590697 590698 590699 590700 Description Sears