Craftsman 247.795940 manual Trouble Shooting, HOW to Order Replacement Parts

Page 15

i

TROUBLE SHOOTING

PROBLEM

Engine fails to start

Loss of power;

operation erratic

Engine overheats

Too much vibration

Unit does not

discharge

Rate of discharge

slows considerably or composition of

discharged material changes

POSSIBLE CAUSE(S)

•Fuel tank empty, or stale fuel.

•Spark plug wire disconnected.

•Faulty spark plug.

•Spar_<plug wire loose.

•Unit running on CHOKE.

•Blocked fuel line or stale fuel.

•Water or dirt in fueT system.

•Carburetor out of adjustment.

•Dirty air cleaner.

•Carburetor not adjusted properly.

•Engine oil level low.

•Loose parts or damaged impeller.

•Discharge chute clogged.

•Foreign object lodged in impeller.

•Shredding blade and/or chipper blades dull.

CORRECTIVE ACTION

•Fill tank with clean, fresh fuel.

•Connect wire to spark plug.

•Clean, adjust gap or replace.

•Connect and tighten spark plug wire.

•Move choke lever to OFF position.

•Clean fuel line; fill tank with clean fresh gasoline.

•Disconnect fuel line at carburetor to drain fuel tank. Refill with fresh fuel,

•Adjust carburetor or contact your SEARS

Service Center.

•Service air cleaner. See Customer Responsibilities section of this manual.

•Contact your SEARS Service Center.

•Fill crankcase with proper oil.

•Stop engine immediately and disconnect spark plug wire. Tighten all bolts and nuts.

Make all necessary repairs. If vibration continues, have unit serviced by a SEARS Service Center.

•Stop engine immediately and disconnect spark plug wire. Clean flail screen and inside

of blower housing, See Service/Adjustments section of this manual.

•Stop engine immediately and disconnect spark plucj wire. Remove lodged object,

•Sharpen or replace shredding and chipper

blades.

NOTE: For repairs beyond the minor adjustments listed above, please contact your nearest SEARS Service Center.

HOW TO ORDER REPLACEMENT PARTS

Each chipper-shredder has its own model number. Each engine has its own model number.

The model number for your chipper-shredder will be found on a label attached to the frame.

The model number for the engine will be found on the blower housing of the engine.

All parts listed herein may be ordered through Sears, Roebuck and Co. Service Centers and most Retail Stores.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:

*PRODUCT- "5 H.P. Chipper-Shredder"

*MODEL NUMBER - 247.795940

*ENGINE MODEL NO. - HSS0-67344G

*PART NUMBER

*PART DESCRIPTION

Your Sears merchandise has added value when you consider that Sears has service units nationwide staffed with Sears trained technicians...professional technicians specifically trained on Sears products, having the parts, tools and the equipment to insure

that we meet our pledge to you..."we service what we sell."

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 770-8474H IrrftsmrnPreparation Safety RulesOneyear Limited Warranty on Craftsmangas CHIPPER-SHREDDER WarrantyCustomer Responsibilities Product Specifications Maintenance AgreementTable of Contents CHIPPER-SHREDDER AccessoriesIndex Chute Deflector Hex Nut Assembly InstructionsTools Required for Assembly Howto SET-UPYOUR CHIPPER-SHREDDERMeets Ansi Safetystandards OperationKnow Your CHIPPER-SHREDDER To Stop Engine HOW to USE Your CHIPPER-SHREDDERGAS Gasand OIL FILL-UPPernot INCHUTEUSE. Door is Closed When OILTo Startengine Secured with the Hand KnobsChoke Engine Customer ResponsibilitiesGeneralrecommendations CHIPPER-SHREDDERMuffler AIR CleanerClean Engine Spark PlugRemovingthe Flail Screen Disconnect Spark Plug Wire and Move IT Away from Spark PlugStorage OtherChipper Blades Chute Hairpin Clips Clevis PinsSharpeningor Replacingthe Blades NutsFlail WashersScreen Chipper Chute Hand KnobsCarburetoradjustment FlailsEnginespeed Engine Model NO. HSS0-67344G Part Number Part Description Trouble ShootingHOW to Order Replacement Parts PRODUCT- 5 H.P. Chipper-Shredder Model NumberRepair Parts Repair Parts List for Rewind StarterNumbershere MODELandSERIAL27241 Lifter, Valve Pin, DowelExtension Cap 28277 Washer FlatMuffler Spark Arrester KIT Part No Optional EquipmentPICADORA-DESMENUZADORA Caballos DE FuerzaEtapas DE Corte Cubridor DE Paja Y EmbolsadorEntrenamiento Reglas DE SeguridadResponsabilidades DEL Cliente GarantiaEspecificaciones DEL Producto Acuerdo DE MantenimientoAccesorios Para LA PICADORA-DESMUNEZADORA Tabla DE MateriasComo Prepararsu Picadora Desmenuzadora Instrucciones DE ArmadoParaextraerla PICADORA-DES- Menuzadora DE LA Caja Herramientasrequeridasparael ArmadoControlesde Operacion Conozcasu PICADORA-DESMENUZADORAParaapagarel Motor Como Usar SU Picadora DesmenuzadoraSonales O Daiios a LA Maquina Fgura Llenadode GAS Y AceiteRgura AceiteManente Paraencenderel MotorAdvertencia LA Experiencia Indica QUE Nunca USE Productos DE Limpieza DEResponsabilidades DEL Cliente Programa DE MantenimientoLAS Fechas a Recomendacionesgenerales PICADORA-DESMENUZADORAMotor Limpieza DEL Motor BujlaAdvertencia Nunca Almacene LA Extrayendoel Tamiz DE LA Desgranadora ServicioAjuste 0TROSCuchilla DE Desmenuzar NOTALa arandelaacopadaest& en el fondo de laDesgranadoras Ajustedel CarburadorVelocidaddel Motor Localizacion DE Fallas Como Ordenar Piezas DE Repuesto

247.795940 specifications

The Craftsman 247.795940 is a powerful and versatile snow blower designed to handle winter's toughest challenges. Known for its robust construction and user-friendly features, it stands out as a reliable tool for homeowners seeking efficiency in snow removal.

One of the hallmark features of the Craftsman 247.795940 is its impressive engine. Equipped with a reliable and potent 208cc engine, it offers ample power to tackle heavy snowfalls. This engine ensures that users can clear snow with ease, even from larger driveways and walkways. The snow blower features a 24-inch clearing width, allowing it to cover significant ground quickly, while the 21-inch intake height enables it to easily manage deeper snow accumulations.

The Craftsman 247.795940 utilizes a two-stage snow removal system, which is designed to enhance performance and efficiency. The first stage involves an auger that gathers snow and ice, while the second stage involves a powerful impeller that discharges the snow through the chute. This two-stage mechanism results in a faster and more effective snow removal process compared to single-stage units, making it an ideal choice for residential areas prone to heavy snowfall.

Another notable feature is the adjustable chutes, which allow operators to control the direction and distance of the snow discharge. This customization is particularly useful for directing snow away from driveways, sidewalks, or other areas that need to remain clear. The chute can be easily adjusted from the operator's position, enhancing the overall user experience.

The Craftsman 247.795940 also emphasizes ease of use. It features electric start capabilities, enabling users to start the snow blower effortlessly, even in frigid temperatures. Additionally, the machine comes with a user-friendly control panel, which allows for intuitive operation, even for those new to snow blowers.

Durability is another critical aspect of the Craftsman 247.795940. Constructed with high-quality materials, this snow blower is designed to withstand harsh winter conditions. Its heavy-duty build ensures longevity and reliability, making it a valuable investment for homeowners.

In summary, the Craftsman 247.795940 is a formidable snow blower that combines powerful performance with user-friendly features. With its robust engine, efficient two-stage system, and adjustable chute, it offers an exceptional snow clearing experience. Whether dealing with light flurries or heavy snowfalls, this snow blower is designed to deliver, making it a trusted choice for winter maintenance.
Top Page Image Contents