Craftsman 247.795940 manual Safety Rules, Preparation

Page 2

SAFETY RULES

WARNING: TO REDUCE THE POTENTIAL FOR ANY INJURY, COMPLY WITH THE FOLLOWING I

SAFETY INSTRUCTIONS, FAILURE TO COMPLY WITH THE INSTRUCTIONS MAY RESULT IN I

I_ PERSONAL INJURY.

TRAINING

•Read this owner's manual carefully in its entirety before

attempting to assemble or operate this machine. Be com- pletely familiar with the controls and the proper use of this machine before operating it Keep this manuat in a safe place for future and regular reference and for ordering replacement parts.

•Children must never be allowed to operate this equipment.

•No one should operate this unit while intoxicated or while taking medication that impairs the senses or reactions,

•This equipment should never be operated in the vicinity of children, pets or other persons.

•Never run your machine in an enclosed area as the exhaust from the engine contains carbon monoxide, which is an odorless, tasteless and deadly poisonous gas.

•Never place your hands or any part of your body or cloth-

ing inside the feeding chamber, discharge chute, or near any moving part while the machine or engine is running.

•If it is necessary for any reason to inspect or repair the feeding chamber or any part of the machine where a mov- ing part can come in contact with your body or clothing, stop the machine, allow it to cool, disconnect the spark plug wire from the spark p)ug and move it away from the spark plug before attempting such inspection or repair.

PREPARATION

•Wear safety glasses provided with your unit while operat- ing the chipper-shredder to prevent injury from any mate- rial which may be ejected out of the openings.

•Wear proper apparel. Avoid wearing loose fitting clothing.

Wear gloves when handling material.

•HANDLE GASOLINE WITH CARE as it is an extremely flammable fuel.

•Check the fuel before starting the engine. Do not fill the fuel tank indoors, while the engine is running, or while the engine is still hot. Turn the unit off and let the engine cool before refueling.

•Fuel your chipper-shredder in a clean area. Do not smoke while refueling.

•Fuel tank cap must be secure at alI times except during refueling.

•Avoid spilling gasoiine or oil. Wipe the unit clean of any spilled fuel or oil.

•Store fuel and oil in approved confiners, away from heat or open flame, and out of reach of children.

•This machine should be operated only upon a level surface.

•Assure that all screws, nuts and bolts and other fasteners are properly secured.

OPERATION

•When feeding shreddable material into this equipment, be extremely careful that pieces of metal, rocks, bottles, cans or other foreign objects are not included. Personal injury or damage to the machine could result.

•If the cutting mechanism strikes any foreign object or if your machine should start making an unusual noise or vibration, immediately stop the engine, disconnect the

spark plug wire from the spark plug and move it away from the spark plug. Allow the machine to stop and take the following steps:

Inspect for damage.

Replace or repair any damaged parts.

Check for any loose parts and tighten to assure contin- ued safe operation.

•The engine must be kept clean of debris and other accu- mulations.

•Do not allow an accumulation of processed material to

build up in the discharge area as this will prevent proper discharge and can result in kick-back from feed opening.

•Never place your hands or any other part of your body or clothing inside the feeding chamber, discharge chute or near any moving part while the engine is running.

•Keep all guards and deflectors in place and in good work- ing condition to assure continued safe operation.

•Always stand clear of the discharge area when operating this machine.

•Keep your face and body back from the feed opening to avoid accidental bounce back of any material.

•Do not ever-reach. Keep proper balance and footing at all times.

•The engine governor settings on your machine must not be altered, changed, or tampered with. The governor controls the maximum safe operating speeds and pro- tects the engine and all moving parts from damage caused by overspeed.

•Do net transport machine while engine is running.

•Do not operate engine if air cleaner or cover directly over carburetor air intake is removed, except for adjustment. Removal of such parts could create a fire hazard.

MAINTENANCE AND STORAGE

•When this equipment is stopped for servicing, inspection,

storage or to change an accessory, make sure the spark plug wire is disconnected from the spark plug and moved away from the spark plug. The machine should be allowed to cool down before making such inspection,

adjustments, service, etc. Maintain your machine with care and keep it clean for the best and continued safe

operation.

•Do not use flammable solutions to clean the air filter.

•When not in use, your machine should be stored out of the reach of children. Keep where gasoline fumes will not reach an open flame or spark. For long periods of stor- age, refer to the "Storage" section of this manual.

LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS. ITI MEANS--ATTENTION!!! BECOME ALERT!!! I

YOUR SAFETY IS INVOLVED.[

I

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Irrftsmrn 770-8474HSafety Rules PreparationMaintenance Agreement WarrantyCustomer Responsibilities Product Specifications Oneyear Limited Warranty on Craftsmangas CHIPPER-SHREDDERIndex Table of ContentsCHIPPER-SHREDDER Accessories Howto SET-UPYOUR CHIPPER-SHREDDER Assembly InstructionsTools Required for Assembly Chute Deflector Hex NutKnow Your CHIPPER-SHREDDER Meets Ansi SafetystandardsOperation HOW to USE Your CHIPPER-SHREDDER To Stop EngineOIL Gasand OIL FILL-UPPernot INCHUTEUSE. Door is Closed When GASChoke To StartengineSecured with the Hand Knobs CHIPPER-SHREDDER Customer ResponsibilitiesGeneralrecommendations EngineSpark Plug AIR CleanerClean Engine MufflerOther Disconnect Spark Plug Wire and Move IT Away from Spark PlugStorage Removingthe Flail ScreenNutsFlail WashersScreen Chipper Chute Hand Knobs Chute Hairpin Clips Clevis PinsSharpeningor Replacingthe Blades Chipper BladesEnginespeed CarburetoradjustmentFlails PRODUCT- 5 H.P. Chipper-Shredder Model Number Trouble ShootingHOW to Order Replacement Parts Engine Model NO. HSS0-67344G Part Number Part DescriptionRepair Parts Parts List for Rewind Starter RepairMODELandSERIAL NumbershereCap 28277 Washer Flat Pin, DowelExtension 27241 Lifter, ValvePart No Optional Equipment Muffler Spark Arrester KITCubridor DE Paja Y Embolsador Caballos DE FuerzaEtapas DE Corte PICADORA-DESMENUZADORAReglas DE Seguridad EntrenamientoAcuerdo DE Mantenimiento GarantiaEspecificaciones DEL Producto Responsabilidades DEL ClienteTabla DE Materias Accesorios Para LA PICADORA-DESMUNEZADORAHerramientasrequeridasparael Armado Instrucciones DE ArmadoParaextraerla PICADORA-DES- Menuzadora DE LA Caja Como Prepararsu Picadora DesmenuzadoraConozcasu PICADORA-DESMENUZADORA Controlesde OperacionSonales O Daiios a LA Maquina Paraapagarel MotorComo Usar SU Picadora Desmenuzadora Aceite Llenadode GAS Y AceiteRgura FguraNunca USE Productos DE Limpieza DE Paraencenderel MotorAdvertencia LA Experiencia Indica QUE ManenteLAS Fechas a Responsabilidades DEL ClientePrograma DE Mantenimiento Motor RecomendacionesgeneralesPICADORA-DESMENUZADORA Advertencia Nunca Almacene LA Limpieza DEL MotorBujla 0TROS ServicioAjuste Extrayendoel Tamiz DE LA DesgranadoraNOTALa arandelaacopadaest& en el fondo de la Cuchilla DE DesmenuzarVelocidaddel Motor DesgranadorasAjustedel Carburador Como Ordenar Piezas DE Repuesto Localizacion DE Fallas

247.795940 specifications

The Craftsman 247.795940 is a powerful and versatile snow blower designed to handle winter's toughest challenges. Known for its robust construction and user-friendly features, it stands out as a reliable tool for homeowners seeking efficiency in snow removal.

One of the hallmark features of the Craftsman 247.795940 is its impressive engine. Equipped with a reliable and potent 208cc engine, it offers ample power to tackle heavy snowfalls. This engine ensures that users can clear snow with ease, even from larger driveways and walkways. The snow blower features a 24-inch clearing width, allowing it to cover significant ground quickly, while the 21-inch intake height enables it to easily manage deeper snow accumulations.

The Craftsman 247.795940 utilizes a two-stage snow removal system, which is designed to enhance performance and efficiency. The first stage involves an auger that gathers snow and ice, while the second stage involves a powerful impeller that discharges the snow through the chute. This two-stage mechanism results in a faster and more effective snow removal process compared to single-stage units, making it an ideal choice for residential areas prone to heavy snowfall.

Another notable feature is the adjustable chutes, which allow operators to control the direction and distance of the snow discharge. This customization is particularly useful for directing snow away from driveways, sidewalks, or other areas that need to remain clear. The chute can be easily adjusted from the operator's position, enhancing the overall user experience.

The Craftsman 247.795940 also emphasizes ease of use. It features electric start capabilities, enabling users to start the snow blower effortlessly, even in frigid temperatures. Additionally, the machine comes with a user-friendly control panel, which allows for intuitive operation, even for those new to snow blowers.

Durability is another critical aspect of the Craftsman 247.795940. Constructed with high-quality materials, this snow blower is designed to withstand harsh winter conditions. Its heavy-duty build ensures longevity and reliability, making it a valuable investment for homeowners.

In summary, the Craftsman 247.795940 is a formidable snow blower that combines powerful performance with user-friendly features. With its robust engine, efficient two-stage system, and adjustable chute, it offers an exceptional snow clearing experience. Whether dealing with light flurries or heavy snowfalls, this snow blower is designed to deliver, making it a trusted choice for winter maintenance.
Top Page Image Contents