4. Function
Mowing correctly:To produce a
Relatively long cut grass (> 1 cm) must be removed so that the lawn does not become yellow and matted.
After relatively long intervals between mowing (holiday lawn), up to max. 12 cm, first of all cut in one direction with the cutting height as high as possible, then cut in the crosswise direction at the cutting height required.
If possible, only cut the grass when it is dry, if the grass is damp, the cutting pattern will be uneven.
The area of lawn you can mow with one charged accu depends on the height and thickness of the lawn, i.e. the taller and thicker the lawn, the smaller the area of lawn you can mow with one fully charged Accu.
5. Operation
Starting the cylinder | Risk of injury if the cylinder mower does not switch off |
mower: | automatically! |
| V Do not remove or bypass safety devices on the cylinder |
H | mower (e.g. by tying the starting handle to the upper part |
of the upright)! |
Danger! Blade cylinder continues to turn after
Aswitching off!
VNever lift, tilt or carry the cylinder mower with the
motor running!
| V Never start the mower on a paved surface (e. g. | |
| asphalt). | |
G | V Always maintain the safety distance between the | |
blade cylinder and the user set by the guide handle. | ||
|
Charge display:
GB
green LED Accu fully charged
yellow LED Accu half- charged
red LED Accu flat
9 | I |
B |
1.Stand the cylinder mower on a level part of the lawn.
2.Insert the key G into the charging socket H.
3.Keep safety interlock B pressed down and pull the starting handle I on the upper handle 9. The cylinder mower starts and the charge display lights up for 10 seconds.
4.Release starter safety lock B.
If the red LED (Accu flat) goes on, the Accu must be charged.
The Accu cover must always be kept closed during mowing. The Accu becomes warm when using the cylinder mower. This is normal and does not impair its performance.
Blockage protection: If the cylinder mower is blocked by a foreign body or the motor is overloaded (red
15