GB
Switching off the cylinder mower:
Adjusting the cutting height:
K
K | J |
Circuit Breaker: If the Cordless Motor Mower is overloaded over a longer period of time the motor may become hot (Red
Discharge protection:
The mower switches off automatically as soon as the capacity of the Accu has been exhausted (discharge protection).
We recommend recharging the battery straight away.
Note: The accu cylinder mower can be operated with the Accu or without as a hand mower.
The key prevents the cylinder mower being switched on accidentally.
1.Release starting handle I.
2.Remove the safety key each time you stop work.
DANGER! Cutting tool can cause injuries!
AV When adjusting the cutting height, remove the key and wear suitable work gloves.
The cutting height can be set to any position between 12 mm and 42 mm.
1. Stand behind the cylinder mower with one foot on the roller J.
2. Slacken the two locking screws K | L | |
and set to the height required on | ||
| ||
the scale L. |
|
3.Tighten the two locking screws K on both sides to the same height.
The locking screws K must always be set to the same height on both sides.
| The mower may only be adjusted to a depth in which the lower |
| blade does not touch the ground when it is uneven. |
Mowing with the grass | v Suspend the grass collection sack in the cylinder mower |
collection sack (accessories): | as described in the Operating Instructions. |
6. Putting into Storage
Storage: | 1. | Remove safety key. |
| 2. | Charge Accu (see 7. Maintenance). |
| 3. | Clean mower before storage and connect to the charger |
|
| (see 7. Maintenance). |
| 4. | Store mower in a dry, frostproof but cool place out of reach of |
|
| children. |
To save space, the cylinder mower can be folded up by folding the clamping lever. Ensure the cable is not trapped during this process.
16