Craftsman 79480 manual Second Lower, Secure the Throttle Cables

The completed blower tube should look like Figure 6.

Elbow Tube ./ Hose Clamp

Flex Tube

Throttle Cables

Hose Clamp_ _

)o0

On/Off Switch

Upper Blower Tube-.._._____

_Throttle Grip

First Lower _

Blower Tube _

Second Lower

Blower Tube _

Secure the Throttle Cables

Place a zip tie around the elbow tube and the throttle cables (Fig. 7) as shown, making sure not to crimp the cables.

Zip Tie

i

Zip Tie

Fig. 7

Adjusting the Handle

1.Rotate the throttle grip counterclockwise around the blower tube until it is pointing directly downward (Fig. 8, A).

I _	adjust. This may cause the throttle cables to
	I WARNING:	Do not rotate	the	handle	clockwise to
	disconnect	from the throttle	grip	or the	engine.

_ B

A

Fig. 8

2.Pull or push the throttle grip along the handle tube until its distance from the backpack blower is comfortable (Fig. 8, B).

3.Align the throttle grip with the slot closest to the comfortable place and rotate the throttle grip clockwise into the upright position (Fig. 9).

Nozzle

	Fig. 6	I
sure that the blower tubes are locked in place or firmly
WARNING:	To avoid serious personal injury, make
installed.			Fig. 9