Weed Eater 530088117 instruction manual Troubleshooting Table Cause Remedy, Compression low

Page 7

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

 

CAUSE

REMEDY

Engine will not

1.

Engine flooded.

1. See “Starting a Flooded Engine”

start.

 

 

in Operation section.

 

2.

Fuel tank empty.

2. Fill tank with correct fuel mixture.

 

3.

Spark plug not firing.

3. Install new spark plug.

 

4.

Fuel not reaching

4. Check for dirty fuel filter; replace.

 

 

carburetor.

Check for kinked or split fuel line;

 

 

 

repair or replace.

 

5.

Compression low.

5. Contact an authorized service dealer.

Engine will not

1.

Fuel not reaching

1. Check for dirty fuel filter; replace.

idle properly.

 

carburetor.

Check for kinked or split fuel line;

 

 

repair or replace.

 

2.

Carburetor requires

 

2. See “Carburetor Adjustment” in

 

 

adjustment.

Service and Adjustments section.

 

3.

Crankshaft seals worn.

3. Contact an authorized service dealer

 

4.

Compression low.

4. Contact an authorized service dealer.

Engine will not

1. Air filter dirty.

1. Clean or replace air filter.

accelerate,

2. Fuel not reaching

2. Check for dirty fuel filter; replace.

lacks power, or

 

carburetor.

Check for kinked or split fuel line;

dies under a

 

 

repair or replace.

3. Spark plug fouled.

3. Clean or replace spark plug

load.

 

 

and re-gap.

 

 

 

 

4. Carburetor requires

4. See “Carburetor Adjustment” in

 

 

adjustment.

Service and Adjustments section.

 

5. Carbon build up.

5. Contact an authorized service dealer.

 

6. Compression low.

6. Contact an authorized service dealer.

Engine smokes

1. Choke partially on.

1. Adjust choke.

excessively.

2. Fuel mixture incorrect.

2. Empty fuel tank and refill with

 

3. Air filter dirty.

correct fuel mixture.

 

3. Clean or replace air filter.

 

4. Carburetor requires

4. See “Carburetor Adjustment” in

 

 

adjustment.

Service and Adjustments section.

Engine runs hot.

1. Fuel mixture incorrect.

1. See “Fueling Engine” in Operation

 

 

 

section.

 

2. Spark plug incorrect.

2. Replace with correct spark plug.

 

3. Carburetor requires

3. See “Carburetor Adjustment” in

 

 

adjustment.

Service and Adjustments section.

 

4. Carbon build up.

4. Contact an authorized service dealer.

-- 7 --

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Operate Your Unit Safely Know Your UnitPlan Ahead Handle Fuel with CAUTION, IT is Highly FlammableBlower Tube AssemblyBefore Starting Engine Fueling Engine Primer BulbChoke Lever Operating TipsGeneral Recommendations Inspect and Clean Unit and DecalsClean AIR Filter Starting a Warm EngineOther Replace Spark Plug Carburetor AdjustmentsEngine Seasonal StorageTroubleshooting Table Cause Remedy Ligations The U. S. Environmental Your Warranty Rights and OBPlacement and Repair of Emission

530088117 specifications

The Weed Eater 530088117 is a versatile and robust tool designed for homeowners and landscaping professionals alike. Known for its efficiency and performance, this weed eater combines modern technology with user-friendly features, making yard maintenance tasks easier and more enjoyable.

One of the standout features of the Weed Eater 530088117 is its powerful engine. Equipped with a high-performance 25cc 2-cycle engine, this model provides the necessary power to tackle tough weeds and thick grass with ease. The engine is designed for optimum fuel efficiency, ensuring that users can work longer without frequent refueling, which is especially useful for larger yards.

The design of the Weed Eater 530088117 emphasizes user comfort and convenience. It comes with an adjustable handle, allowing users to customize the grip to suit their height and preferences. This feature helps reduce fatigue during extended use. Additionally, the tool is lightweight, making it easier to maneuver around tight spaces and intricate landscapes.

A key technological advantage of the Weed Eater 530088117 is its advanced bump feed line system. This innovative feature allows users to easily advance the cutting line with a simple tap on the ground. This ensures that the user always has a fresh length of line ready to tackle any job, without the hassle of constantly stopping to adjust the line manually.

The dual-line cutting head enhances the efficiency of the weed eater, allowing for a wider cutting path. This not only saves time but also delivers a cleaner cut, which results in a more manicured lawn. The plastic housing of the cutting head is designed for durability while also being lightweight, reducing the strain on the user.

Furthermore, the Weed Eater 530088117 is equipped with a protective guard that shields users from flying debris while cutting. This safety feature gives users peace of mind, knowing they can work effectively without compromising their safety.

In summary, the Weed Eater 530088117 is a powerful, user-friendly, and efficient tool for maintaining lawns and gardens. With its strong engine, adjustable handle, advanced line feeding technology, and safety features, this weed eater stands out in its category, making it a valuable addition to any landscaping toolkit. Whether tackling overgrown areas or fine-tuning edges, the Weed Eater 530088117 delivers reliable performance to help achieve a beautifully maintained yard.
Top Page Image Contents