Troubleshooting
Problem | Possible cause | Remedy |
|
|
|
All menus are displayed in the wrong language. | The menu language was set incorrectly. | Set the menu language: |
|
| Press the INFO button in TV mode (Index). |
|
| Mark the first key word and call it with OK. |
|
| Then select the language and confirm it with |
|
| OK. |
|
|
|
In the TV menu, Connections cannot be called | A timer recording is in progress. | Wait until the timer recording ends or delete |
(displayed in grey). |
| the timer recording (page 49). |
|
|
|
The control functions of the Loewe Recorder | a) The Digital Link function is not activated or | a) Activate Digital Link in the recorder (see |
and the Timer are not working or are not | not possible in the recorder. | operating instructions of the recorder). |
working properly | b) | b) Connect |
| ||
| c) Recorder is not logged in. | c) Register recorder (page 37). |
|
|
|
General problems when connecting external | a) The device is not logged in to the connection | a) In the connection wizard (TV menu → |
devices via an AV input. | wizard or is connected differently from | Connections → New devices/modifications) |
| shown in the connection diagram. | compare the connection diagram with the |
|
| actual installation and connect as shown if |
|
| necessary (page 37). |
| b) The AV standard is set incorrectly. | b) Set the correct standard (page 16). |
| c) The signal type is set incorrectly. | c) Set the correct signal type (page 37). |
|
| If for AV standard or AV signal Automatic is |
|
| set then this can cause errors to be |
|
| detected with signals that do not comply |
|
| with standards. In this case standard and |
|
| signal must be set according to the |
|
| information in the operating manual of the |
|
| external device. |
|
|
|
The connection of a decoder does not function | a) The signal is not decoded because the | a) Follow the instructions in the connection |
or does not function properly. | correct decoder stations have not been | wizard (TV menu → Connections → New |
| selected in the connection wizard. | devices/modifications) and select the |
|
| appropriate decoder station (page 37). |
| b) In decoder mode the sound is missing | b) Follow the instructions in the connection |
| because the wrong decoder sound has been | wizard and select the right audio source |
| assigned in the connection wizard. | (Decoder, TV oder Autom.) (page 37), see |
|
| also the decoder manual. |
|
|
|
|
|
|
55 - 
