Operating additional equipment
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con- nected to an AV input, an AV input can be assigned to the digital audio input socket AUDIO DIGITAL IN. When switching to this AV input, the digital audio signal applied to the AUDIO DIGITAL IN input is passed on to the integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned AV input instead of the analogue sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player, you have to feed the digital audio signal to the TV set.
The external digital audio signal can be played back via the integrated retrofittable Dolby Digital Decoder in the TV set, via an externally con- nected digital audio amplifier or Loewe Auro.
➠If an external audio amplifier is used, this must be regis- tered in the sound components wizard (see page 46).
Call TV menu.
34Select Connections,
6 go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select Assign digital audio input,
6 go to the menu line below.
34Select AV input.
|
| TV menu |
|
|
|
|
|
|
| Connections |
|
|
|
|
|
|
| Miscellaneous |
|
| INFO | END | |
|
| Assign digital audio input |
|
|
|
|
|
| no | to AV1 | to AV2 | to AVS | to HDMI1/DVI |
| to HDM |
To connect a DVD player to the digital audio input of the TV set for example, connect the digital output socket of the DVD player (DIGITAL OUT) via a cinch cable to the AUDIO DIGITAL IN socket on the TV set.
|
|
|
|
| TV set |
|
|
|
| AUDIO DIGITAL IN | |
AV1 |
|
|
|
|
|
| MULTICHANNEL AUDIO OUT |
|
|
| |
| LEFT CENTER | LEFT |
|
| I |
| REAR | FRONT |
|
| |
DIGITAL AUDIO OUT |
|
| STEREO OUT | VIDEO OUT | |
PCM/MPEG2/AC3/DTS |
|
| |||
MAINS |
|
|
|
|
|
|
|
|
|
| II |
|
|
|
|
| TO |
OPT OUT DIG OUT | RIGHT SUBW. | RIGHT | R L | (CVBS) | (Y/C) |
REAR | FRONT | AUDIO | VIDEO OUT |
DVD player
The DVD player is already registered at AV1 in the connection wizard at the factory.
If new devices are connected and registered in the connection wizard, the digital audio input AUDIO DIGITAL IN is assigned in the connection wizard (see page 38).
Audio connection in HDMI (DVI) devices
External devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI adapter to the HDMI1/DVI or HDMI2/DVI socket of the TV set, you can connect the digital sound of the external device to the digital audio input socket AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external devices, connect it to the AUDIO IN1 socket.
External devices with HDMI connection
If external devices with HDMI interface are connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set, no assignment of the audio input is necessary because the digital transmission of picture and sound takes place via one connection in HDMI.
RS-232C interface
You can connect either the Loewe Individual Sound Projector or a home network system of different manufacturers (e.g. AMX, Crestron) to your TV set via the
Please consult your dealer for configuration of the
47 -