Loewe 32959022 manual Adjusting the sound

Daily operation

Adjusting the sound

Switching sound off/on

Sound off;

Sound on: Press button again or set volume V+.

Setting the volume

V+/V– volume louder / quieter.

The volume bar will be shown briefly if no other menu is displayed.

Setting the sound mode

Call Sound mode.

Sound mode	...
optimal		(5)	4	3	2	1

34Select the number of speakers you want to hear.

Additional sound settings for volume adjustment and for Sound mode:

➠As long as you can still see the volume bar or the selection of speakers for sound mode:

5 Call additional sound settings.

			END
Volume	Sound mode	DPLII mode	Sound adjustment	H
24

34Select sound setting,

6 Go to the menu line below.

34Make changes.

Sound settings via the TV menu

➠In normal TV mode, without other displays.

Call TV menu.

34Select Sound,

6 go to the menu line below.

34Select desired sound setting,

6Go to the menu line below.

34Make changes.

Explanations of the sound settings:

Sound mode Select the number of speakers you want to hear. The selection depends on the connected sound components (from page 41) and on the transmitted audio signal.

➠If the number of speakers appears in brackets, the sound of missing speakers is transmitted by the existing speakers (virtual).

optimal The momentarily reproduced audio signal is output with the ideal number of speakers.

1 Play centre sound or mono (left/right). 2 Play front sound (L/R stereo).

3 Play front and centre sound. 4 Play front and surround sound.

5 Play front, surround and centre sound.

Amplifier Play via an external HiFi amplifier. Selection is only possible if an amplifier has been selected in the sound components wizard (see page 46).

➠You can also enter the number of speakers with the numeric buttons of the remote control.

Sound	Speech, Classical, Pop, Custom music, and Custom film
adjustment	sound.
Headphone vol.	Adjust the headphones volume.
Loudness	Proper boost of bass and treble tones at low volume.
Dolby PLII	Here you can make Dolby Pro Logic II sound settings for
mode	movie, music, matrix and personal settings. Menu item
	only appears with certain sound mode settings.
more ...	call with OK.
Loudspeaker/	Selection possibility Mono/Stereo or Sound 1 or Sound
Headphone	2 for two-sound broadcasts separately for speakers and
sound	headphones. Only available for analogue stations.
Auto Volume	Reduces volume differences, e.g. for advertisements that
	are too loud.
AV output	Sound selection for two-sound broadcasts.
signal
Maximum	Determining the maximum volume that can be set.
volume
Switch on	Specify the volume that is set when switching on the TV
volume	set with the mains switch. This does not affect switching
	the set on from standby mode.
Volume	The volume can differ according to the individual stations.
adjustment for	If the sound is too loud or too quiet in relation to other
current station	stations, adjust the volume. When the menu is open, you
	can select the stations one after another with P+/P– and
	adjust every single station conveniently.
Balance	Set Stereo-Balance so that the volume impression is identcal
	on the left and right.

- 20