Loewe 32959022 manual Positioning/aligning DVB-T antenna, Explanations of the DVB-T antenna

Initial installation

Digital Link If you have registered and connected a recorder in the Plus connection wizard, the Digital Link Plus transmission begins at the end of the sound components wizard. If a Digital Link Plus capable recorder is connected, the station list of the analogue stations is transmitted to the

external recorder.

You can also call Digital Link Plus under TV menu → Connections → Digital Link Plus.

If you have not connected a Digital Link Plus capable recorder, you can abort the transmission.

Explanations of the DVB-T antenna:

Room	With good reception conditions a room antenna can be
antenna	used for DVB-T (socket ANT2).
Active	Under less favourable reception conditions, it is advisable
antenna	to use an active antenna which has to be set accordingly
	in the initial installation or in the TV menu → Connections
	→ Antenna DVB → Antenna DVB-T (see DVB-T antenna
	on page 12).
Unidirectional	If the location is outside of the normal transmission
antenna	range then a directional antenna can be used to improve
	reception quality.

Positioning/aligning DVB-T antenna

If you are receiving one or more DVB-T stations with picture and sound interference then you should change the installation location and align- ment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region.

➠In normal TV mode, without other displays. A DVB-T station is received and selected.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Stations,

6go to the menu line below.

34Select Manual adjustment, OK call manual adjustment.

Signal source

Select the area in which you want the broadcaster to search here. You can

use the button to automatically select station by station.

Manual adjustment
Signal source	DVB-T		DVB-C	DVB-S	A
Channel	E05
Frequency	177.50 MHz
Bandwidth	7 MHz
Name	12 Test
C/N 96	Level 99
		Overwrite station		END
		Search		INFO

The signal source is already on DVB-T due to the station preselection.

Position and align the antenna in such a manner that maximum values for C/N and Level are obtained.

Blue button: Start search.

Search for DVB-T stations one after another and compare values for C/N and Level.

Then position/align the antenna to the weakest station so that maximum values for C/N and Level are obtained.

Thereafter perform an automatic search for all DVB-T stations, see page 24.

Explanation of the setting possibilities:

Bandwidth Depending on the selected channel and country the associated bandwidth of 7 or 8 MHz will be set auto- matically.

13 -