Loewe 32959022 manual Connecting audio amplifiers, Mark the HiFi/AV amplifier

Operating additional equipment

Connecting audio amplifiers

The sound components wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual of the audio amplifier for more information.

Call TV menu.

34Select Connections,

6 go to the menu line below.

34Select Sound components.

OK calls the sound components wizard

Mark the HiFi/AV amplifier.

Sound components

Sound playback via ...

TV speakers
Speakers system
HiFi/AV amplifier	 OK
Sound projector	END
HiFi/AV amplifier or TV speaker (switchable)
Sound projector or TV speaker (switchable)
OK Proceed

OK to continue.

34Select whether the sound is to be transmitted

digitally or analogue to the the amplifier. Continue, depending on the amplifier, see right column.

Explanations of the setting possibilities:

HiFi/AV	Select the setting when an amplifier is connected and the
amplifier	TV speakers are not used.
HiFi/AV	Select the setting when an amplifier is connected and the
amplifier or TV	TV speakers are used. In the sound mode selection the
speakers	audio reproduction can then be switched between the
(switchable)	amplifier and the TV speakers.
Sound formats	Specify sound formats which can be decoded with the
	digital amplifier (see operating manual of the used ampli-
	fier).
Type of	Select either stereo or surround amplifier.
amplifier
TV loudsp. as	For every connected surround amplifier, select whether
centre speaker	the TV loudspeakers are to be used as centre speaker.
	If so, establish a connection between the centre output
	of the amplifier and the centre input of the TV set AUDIO
	IN1 C with a cinch cable.
	Attention: Do not use the centre speaker connection of
	the amplifier, use the centre pre-amp output instead!

Connecting digital audio amplifiers

Continuation of the left column above ...

For digital audio transmission: Select yes.

Connect the digital audio output of the TV set AUDIO DIGITAL OUT with the digital audio input of the amplifier via a cinch cable:

			AUDIO DIGITAL OUT		TV set
	PREOUT		AUX1 IN AUX OUT AUX 2
FL	C	FR
			L	L
				DIGITAL
				IN
				DIGITAL
				OUT
SL	SUB	SR	R	R

Digital amplifier

Sound formats, amplifier type and other settings, see explanations of the setting possibilities (left hand column).

Connecting analogue audio amplifiers

Continuation of the left column above ...

For digital audio transmission: Select no.

Connect the analogue audio output of the TV device AUDIO OUT L/R via a stereo cinch cable to the analogue audio input of the amplifier:

TV set

AUDIO OUT L/R

	PREOUT		AUX1 IN AUX OUT		AUX 2
FL	C	FR
			L	L
					DIGITAL
					IN
					DIGITAL
					OUT
SL	SUB	SR	R	R

Analog amplifier

For selecting the amplifier type and making other settings, see explanations of the setting possibilities (left hand column).

- 46