DVB
Software update
TV base software and DVB software
You can update your TV’s base and DVB software. The latest software versions are broadcast by satellite (only Astra1 at the moment) or can be installed in your set with a USB stick.
Please contact your dealer for a software update via USB stick.
➠Location of TV set UK or IRL: With the DVB software update either
➠
Automatic search for new software via satellite
If your set has a retrofitted satellite tuner, it determines overnight whether a new software version is available via satellite. However the TV set must remain in standby mode for this (do not switch off the set with the mains switch).
If a new software version has been found, the set informs you with an
– Loading new software).
Manual search for new software via USB / satellite
If it is not automatically displayed that a new software is available when switching on the set, you can also run a manual search.
The system first checks whether a software update is available on an inserted USB stick. If not the system will search for an update via satellite.
Call TV menu.
34Select Settings,
6 go to the menu line below.
34Select Miscellaneous,
6go to the menu line below.
34Select Software update.
OK calls software update wizard.
The software versions currently loaded in the set are listed.
Software update wizard |
|
Current TV base software: | V2.1.0 |
Current DVB software: | V1.3.0 |
You can now search for new software. Please select the software type and start the search with the OK button.
Software update
Software type
TV base software | OK | END |
|
DVB software
OK Proceed
Select software type:
Select TV base software or
DVB software,
OK start search.
If new versions are available then a subsequent screen message will be displayed.
Loading new software
➠New software available via search.
➠If a new TV and a new DVB software is available in the automatic search for new software versions via satellite (1, you can select the software type to be updated.
Software update wizard
A new software is available.
TV base software: | current V2.1.0 | new V2.1.1 |
Please specify whether and, if so, when you want to load the new software.
Software update
Update options
Load new software now | OK |
Load new software after switch off to standby | END |
| |
Keep current software |
|
OK Proceed |
|
Select update option:
Load new software now
Load new software after switch off to standby (update after switching off)
Keep current software (no update desired).
OK more or exit wizard.
OK start software update.
A bar is displayed to inform you about the progress of the load process. During the loading process do not switch off your device via the mains switch! This may last up to 20 minutes. You will be informed when it is finished.
At the end of loading:
Turn off the TV set off with the mains switch and turn it on again. This is not necessary when loading the software with the update option Load new software after switch off to standby mode.
If a new software has not been updated via satellite (1, you will be reminded of this several times when switching on the set.
35 - 
