Weed Eater 165412, HD12538G manual HOW to USE Your Tractor

Page 11

OPERATION

HOW TO USE YOUR TRACTOR

---

TO SET PARKING BRAKE (See Fig. 6)

 

Your tractor is equipped with an operator presence sensing

 

switch. When engine is running, any attempt by the operator to

 

leave the seat without first settingthe parking brake will shut off

TO USE THROTLE CONTROL (See Fig. 6)

the engine.

 

*Depress clutchlbrake pedal into full "BRAKE position and hold.

*Place parking brake lever in "ENGAGED" position and release pressure from clutchlbrake pedal. Pedal should remain in "BRAKE" position. Make sure park- ing brake will hold tractor secure.

"DISENGAGED"

PARKING BRAKE

Always operate engine at full throttle.

*Operating engine at less than full throttle reduces the bat- tery charging rate.

*Full throttle offers the best bagging and mower perfor- mance.

TO MOVE FORWARD AND BACKWARD (See Fig. 6)

The direction and speed of movement is controlled by the gearshift lever.

Start tractor with clutchlbrake pedal depressed and gearshift lever in neutral (N) position.

*Move gearshift lever io desired position.

*Slowly release clutchtbrake pedal to start movement.

IMPORTANT: BRING TRACTOR TO A COMPLETE STOP BEFORE SHIFTING OR CHANGING GEARS. FAILURE TO DO SO WILL SHORTEN THE USEFUL LIFE OF YOUR TRANSAXLE.

FIG. 6

STOPPING (See Fig. 6)

MOWER BLADES -

Move attachment clutch lever to "DISENGAGED"position.

GROUND DRIVE -

*Depress clutchlbrake pedal into full "BRAKE" position. Move gearshift lever to neutral (N) position.

ENGINE -

*Move throttle control to slow position.

NOTE: Failure to move throttle control to slow position and allowing engine to idle before stopping may cause engine to "backfire".

Turn ignition key to "OFF position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

Never use choke to stop engine.

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possi- bility, always stop engine when stopping tractor on grass areas.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 5)

The position of the attachment lift lever determines the cutting height.

*Graspliftlever.

*Press plunger with thumb and move lever to desired posi- tion.

The cutting height range is approximately 1-112 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil condi- tions, height of grass and types of grass being mowed.

*The average lawn should be cut to approximately 2-112

inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

*For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Ownersmanual III. Children IV. ServiceGeneral Operation Slope OperationCustomer RESPONSIBILlflES Table of Contents Contents of Hardware Pack Unpack Carton AssemblyTools Required for Assembly To Remove Tractor from CartonInstall Seat See Fig WOW to SET UP Your TractorConnect Battery See Figs Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsIng Know Your Tractor OperationHOW to USE Your Tractor To Operate on Hills Before Starting the EngineTo Transport ADD GasolineTo Start Engine See Fig Mowing TipsBefore Each USE Lubricktion ChartCustomer Responsibil Nance ScheduleBlade Care TractorBrake Operation TiresTransaxle Cooling Customer ResponsibilitiesBArrERY BeltsEngine Cooling Fins See Fig Clean AIR Screen See FigCustomer Responsib AIR Filter See FigIN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTO- Level Mower Housing Service and AdjustmentsBelt Removal To Replace Mower Blade Drive Belt See FigTo Remove Wheel for Repairs See Fig To Adjust Sfeeringwheel AlignmentFront Wheel TOE-INICAMBER Interlocks and Relays To Remove Hood and Grill Assembly See FigT0,START Engine with a Weak BAlTERY See Fig To Replace Headlight BulbSee Fig To Adjust Throttle Control CableEngine StorageCorrection Troubleshoot NG PointsProblem Troubleshooting PointsService Notes Tractor - Model Number HD12538G SchematicElectrical Tractor - Model Number HD125386Repair Parts Chassis and Enclosures KEY Part NO. NO. Description Tracwor - Model Number HDl2538GDrive TRACTOR- Model Number HD125386KEY Part Tragtor - MOD- Nlimber HB12538G Steering AssemblyTractor - Model Number HD125386 Tractor - Model Number HD12538C Seat AssemblyKEY Part Description DecalsWheels & Tires Engine Tractor - Model Nlimber HD125386Manufacturer LlFT Part Description LiftMower 128772 Peerless Transaxle Model Number REF Part Description NO. no Model Number HD12538GREF Part NO. no Description Service Notes CE Notes CE Notes Suggested Guide for Sighting Slopes for Safe Operation

165412, HD12538G specifications

The Weed Eater HD12538G,165412 is a powerful and efficient string trimmer designed to tackle even the most challenging yard maintenance tasks. Built with homeowners and landscaping professionals in mind, this tool combines robust performance with user-friendly features, making it a popular choice among gardening enthusiasts.

One of the standout features of the HD12538G is its potent 25cc 2-cycle engine. This engine is designed to provide ample power and torque, allowing users to trim grass, weeds, and overgrown vegetation with ease. Its lightweight construction enhances maneuverability, reducing fatigue during extended use and enabling users to navigate tight spaces or uneven terrain effortlessly.

Equipped with a flexible and durable dual-line head, the Weed Eater HD12538G efficiently delivers precise cutting action. The auto-feed spool technology automatically feeds the cutting line as needed, eliminating the hassle of manual adjustments and enabling users to maintain focus on their trimming tasks. The trimmer is also compatible with various line sizes, providing versatility to suit different cutting conditions.

In terms of design, the HD12538G features an ergonomic handle and a convenient shoulder strap, offering optimal comfort during operation. The adjustable handle allows for customizable height settings, catering to users of different statures and ensuring comfortable control whether trimming hedges or edging around sidewalks. This thoughtful design reduces strain on the arms and back, making yard work a less daunting task.

Another significant advantage of the Weed Eater HD12538G is its ease of use and straightforward assembly. Users can quickly set up the trimmer and be ready to go in no time, making it an ideal choice for those new to yard maintenance or those who are looking for a reliable tool without a steep learning curve.

In terms of technological advancements, the trimmer boasts a low-emission engine that adheres to environmental regulations. It enables users to maintain their gardens while minimizing their carbon footprint. This makes it not only a practical choice but also a responsible one for eco-conscious consumers.

Overall, the Weed Eater HD12538G,165412 stands out in the market for its powerful performance, ease of use, comfort features, and environmentally friendly design. Whether you're maintaining a small backyard or managing larger landscaping projects, this trimmer combines functionality with user-oriented design, setting a high standard for modern gardening tools.
Top Page Image Contents