Weed Eater 165412, HD12538G manual Storage, Engine

Page 25

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thor- oughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See "CLEANING" in the Customer Responsibilitiessection of this manual).

lnspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Customer Responsibilities - section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. lnspect moving parts for damage, break- age and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

=Fully charge the battery for storage.

=After a period of time in storage, battery may require - recharging.To help prevent corrosion and power leakage during

long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see "TO

-er Responsibilities section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with bat-

-tery terminals.

-Be sure battery drain tube is securely attached.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.CLEAN BATTERYAND TERMINALS" in the Custom-

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSEN-I-IAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AhlD

FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM O F AN ENGINE WHILE IN STORAGE.

Drain the fuel tank.

Start the engine and let it run until the fuel lines and carbu- retor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

rUse fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in min- imizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage contain- er. Always follow the mix ratio found on stabilizer con- tainer. Run engine at least 10 minutes after adding stabi- lizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean

engine oil. (See "ENGINE" in the Customer Responsibilitiessection of this manual).

CYLINDER

*Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylin- der(~).

Turn ignition key to "START" position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

*Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUSTAREAS ARE STILL WARM.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Ownersmanual General Operation IV. ServiceSlope Operation III. ChildrenCustomer RESPONSIBILlflES Table of Contents Contents of Hardware Pack Tools Required for Assembly AssemblyTo Remove Tractor from Carton Unpack CartonConnect Battery See Figs WOW to SET UP Your TractorInstall Seat See Fig Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemIng Know Your Tractor OperationHOW to USE Your Tractor To Transport Before Starting the EngineADD Gasoline To Operate on HillsTo Start Engine See Fig Mowing TipsCustomer Responsibil Lubricktion ChartNance Schedule Before Each USEBrake Operation TractorTires Blade CareBArrERY Customer ResponsibilitiesBelts Transaxle CoolingCustomer Responsib Clean AIR Screen See FigAIR Filter See Fig Engine Cooling Fins See FigMuffler CleaningSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTO- Level Mower Housing Service and AdjustmentsBelt Removal To Replace Mower Blade Drive Belt See FigFront Wheel TOE-INICAMBER To Adjust Sfeeringwheel AlignmentTo Remove Wheel for Repairs See Fig T0,START Engine with a Weak BAlTERY See Fig To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and RelaysSee Fig To Adjust Throttle Control CableEngine StorageCorrection Troubleshoot NG PointsProblem Troubleshooting PointsService Notes Tractor - Model Number HD12538G SchematicElectrical Tractor - Model Number HD125386Repair Parts Chassis and Enclosures KEY Part NO. NO. Description Tracwor - Model Number HDl2538GDrive TRACTOR- Model Number HD125386KEY Part Tragtor - MOD- Nlimber HB12538G Steering AssemblyTractor - Model Number HD125386 Tractor - Model Number HD12538C Seat AssemblyWheels & Tires DecalsKEY Part Description Engine Tractor - Model Nlimber HD125386Manufacturer LlFT Part Description LiftMower 128772 Peerless Transaxle Model Number REF Part NO. no Description Model Number HD12538GREF Part Description NO. no Service Notes CE Notes CE Notes Suggested Guide for Sighting Slopes for Safe Operation

165412, HD12538G specifications

The Weed Eater HD12538G,165412 is a powerful and efficient string trimmer designed to tackle even the most challenging yard maintenance tasks. Built with homeowners and landscaping professionals in mind, this tool combines robust performance with user-friendly features, making it a popular choice among gardening enthusiasts.

One of the standout features of the HD12538G is its potent 25cc 2-cycle engine. This engine is designed to provide ample power and torque, allowing users to trim grass, weeds, and overgrown vegetation with ease. Its lightweight construction enhances maneuverability, reducing fatigue during extended use and enabling users to navigate tight spaces or uneven terrain effortlessly.

Equipped with a flexible and durable dual-line head, the Weed Eater HD12538G efficiently delivers precise cutting action. The auto-feed spool technology automatically feeds the cutting line as needed, eliminating the hassle of manual adjustments and enabling users to maintain focus on their trimming tasks. The trimmer is also compatible with various line sizes, providing versatility to suit different cutting conditions.

In terms of design, the HD12538G features an ergonomic handle and a convenient shoulder strap, offering optimal comfort during operation. The adjustable handle allows for customizable height settings, catering to users of different statures and ensuring comfortable control whether trimming hedges or edging around sidewalks. This thoughtful design reduces strain on the arms and back, making yard work a less daunting task.

Another significant advantage of the Weed Eater HD12538G is its ease of use and straightforward assembly. Users can quickly set up the trimmer and be ready to go in no time, making it an ideal choice for those new to yard maintenance or those who are looking for a reliable tool without a steep learning curve.

In terms of technological advancements, the trimmer boasts a low-emission engine that adheres to environmental regulations. It enables users to maintain their gardens while minimizing their carbon footprint. This makes it not only a practical choice but also a responsible one for eco-conscious consumers.

Overall, the Weed Eater HD12538G,165412 stands out in the market for its powerful performance, ease of use, comfort features, and environmentally friendly design. Whether you're maintaining a small backyard or managing larger landscaping projects, this trimmer combines functionality with user-oriented design, setting a high standard for modern gardening tools.
Top Page Image Contents