Sears C944.414460 Important Points, Bucking Techniques, Bucking Without a Support

Page 12

IMPORTANT POINTS

SCut only one log at a time.

SCut shattered wood very carefully;

sharp pieces of wood could be flung toward operator.

SUse a sawhorse to cut small logs. Never allow another person to hold

the log while cutting and never hold the log with your leg or foot.

SDo not cut in an area where logs, limbs, and roots are tangled. Drag logs into a clear area before cutting them.

BUCKING TECHNIQUES

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Re- start saw and carefully reenter the cut. Do not use a metal wedge. Do not at- tempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pressure.

Overcutting Undercutting

Undercutting involves cutting on the underside of the log with top of saw against the log. When undercutting use light upward pressure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw up- side down to undercut. The saw can- not be controlled in this position.

Always make your first cut on the compression side of the log. The com- pression side of the log is where the pressure of the log’s weight is concen- trated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter

of the log.

SRoll the log over and finish with a

second overcut.

SWatch for logs with a compresion side. See illustration for cutting logs with a compression side.

BUCKING USING A LOG OR

SUPPORT STAND

SRemember your first cut is always on the compression side of the log. (Re-

fer to the illustration below for your first and second cut).

SYour first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support 2nd Cut

1st Cut

1st Cut

2nd Cut

 

 

 

 

 

 

Using a support stand

 

 

2nd Cut

1st Cut

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Gasoline Chain SAW Limited ONE 1 Year Warranty for Craftsmanr GAS Chain SAW Sears Canada, Inc., Toronto, Ontario M5B 2B8Plan Ahead Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with Caution Guard Against KickbackReduce the Chance Kickback Kickback Safety Features Avoid Pinch-KickbackAvoid Pull-In Maintain ControlChain Brake & CKA Angle Special Notice Your saw isCarton Contents AssemblyKnow Your SAW ON/STOP Switch Chain Brake Throttle TriggerThrottle LOCK--OUT Chain TensionON/STOP Switch Starting Position Stopping Your EngineStarting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Inertia activating function controlOperating Tips Tree Felling TechniquesFelling Large Trees Notch CUT and Felling TreeCutting a Fallen Tree Bucking Bucking Using a LOG or Support Stand Important PointsBucking Techniques Bucking Without a SupportLimbing and Pruning Important Points LimbingPruning All the way through the limbCustomer Responsibilities General RecommendationsCheck for Loose Fasteners and PartsCheck Chain Sharpness Check Guide BARCheck Fuel Mixture Level Inspect and Clean Unit and Decals Clean AIR FilterCleaning the Spark Arresting Screen LubricationChain Replacement Replace Spark PlugReplace Fuel Filter Chain SharpeningChain Adjustment Carburetor AdjustmentIdle Speed--T Seasonal Storage Fuel SystemEngine OtherTroubleshooting Table Cause Remedy Troubleshooting Table Trouble Cause RemedyWhere to GET Warranty SER Control Warranty Parts List NANCE, Replacement and REPair of Emission Related

C944.414460 specifications

The Sears C944.414460 is a notable vessel that stands out in the realm of innovative maritime technology. Its design and performance characteristics are geared toward enhancing both efficiency and user experience. One of the main features of the C944.414460 is its robust hull design, which offers exceptional stability and maneuverability, making it suitable for a variety of nautical applications. The vessel's construction incorporates advanced composite materials that not only reduce weight but also improve durability, ensuring a longer lifespan even in harsh marine conditions.

Equipped with a state-of-the-art propulsion system, the C944.414460 utilizes a hybrid engine that combines traditional fuel technology with electric power, allowing for enhanced fuel efficiency and reduced emissions. This eco-friendly approach aligns with modern environmental standards and appeals to a growing market of environmentally conscious consumers. The result is a vessel that performs exceptionally well while minimizing its ecological footprint.

In terms of onboard technology, the C944.414460 features an intuitive navigation system that integrates GPS, radar, and sonar capabilities to provide real-time data and analytics. This system enhances safety and situational awareness, making it easier for operators to make informed decisions while at sea. Additionally, the inclusion of advanced communication equipment ensures seamless connectivity, allowing for constant monitoring and support from shore-based services.

The interior space of the C944.414460 is designed with comfort and functionality in mind. Thoughtful layout and high-quality finishes contribute to an inviting atmosphere for both crew and passengers. The vessel also boasts generous storage solutions that maximize usability without compromising aesthetics. Advanced climate control systems ensure a pleasant environment, regardless of external weather conditions.

Safety is paramount in the design of the C944.414460, which is equipped with multiple redundancy systems to mitigate potential risks. These safety features include advanced fire suppression systems and emergency backup power supplies, ensuring that the vessel maintains its operational integrity under various circumstances.

In summary, the Sears C944.414460 exemplifies a harmonization of modern design and cutting-edge technology. Its main features, including a hybrid propulsion system, advanced navigation equipment, and safety redundancies, combine to create a vessel that not only meets but exceeds contemporary maritime standards. With a focus on efficiency, comfort, and sustainability, the C944.414460 is a significant innovation in the boating industry.
Top Page Image Contents